Download or read book Study of the Initial Stage and Anisotropic Growth of Oxide Layers Formed on Zircaloy 4 written by B. X. Zhou and published by . This book was released on 2011 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in situ investigation of the epitaxial oxide layer formed on a thin specimen heated in a transmission electron microscope was carried out. Some dot-like grains about 10 nm in size were formed on the surface of a relatively thin area. The dot-like grains are monoclinic zirconium oxide and have an orientation relationship of (001)m//(01 ̄11)?-Zr, (001)m//(11 ̄01)?-Zr, with the ?-Zr matrix. Some long strip-like grains, probably a new kind of zirconium suboxide, were formed on the surface of a relatively thick area. The strip-like grains have a bcc structure with a lattice parameter a=0.66 nm and have an orientation relationship of (110)bcc//(10110)?-Zr, [1110]bcc//[0001]?-Zr with the ?-Zr matrix. The relationship between the thickness of oxide layers and the grain orientations of the ?-Zr matrix was studied with coarse-grained Zircaloy-4 specimens through autoclave corrosion tests at 500 and 400°C in superheated steam, and at 360°C in both lithiated and deionized water for long time exposure. The results show that the anisotropic growth of oxide layers on the grain surface with different orientations is considerable. However, the relationship between the thickness of oxide layers and the grain orientations of the ?-Zr matrix varies with corrosion temperature and water chemistry. The largest variation of oxide thickness developed during corrosion tests at 500°C. The thickest oxide layers were formed on those grains whose surface orientations were distributed around the planes from (011 ̄0) to (1 ̄21 ̄0). The thicker oxide layers on these grains were further developed into nodular corrosion. When the specimens were corroded at 360°C in lithiated water, the thickest oxide layers formed on those grains, whose surface orientations tilted from 15 to 30° away from the (0001) plane. When the specimens were corroded at 400°C in superheated steam and at 360°C in deionized water, the difference between the thickness of oxide layers on different grain surfaces was less prominent.

Download or read book Toward a Better Understanding of Dimensional Changes in Zircaloy 4 written by M. Blat-Yrieix and published by . This book was released on 2008 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: In pressurized water reactors, new operating conditions (higher burnup, new chemistry, etc.) can have an effect on the dimensional stability of the fuel assembly skeleton. Previous studies have shown that the fuel assembly growth is, among others parameters (free growth, creep), strongly driven by corrosion. Oxide layer and hydrides precipitation could both induce an increase of the dimensional parameters. The scope of the present study is, regardless of irradiation effect, to quantify and to understand the separate effects of hydrogen and oxide layers on the Zircaloy-4 dimensional changes. Experimental works have been performed in laboratory on stress relieved annealed (SRA) and recrystallized (RXA) Zircaloy-4 strips. First, the hydrogen impact on dimensional changes has been studied without the effect of the oxide layer. The measurements were performed at room temperature on strips previously pre-hydrided by the gaseous charging method. The hydrogen content of the samples was between 100 ppm and 2000 ppm. Results indicate a linear correlation between hydrogen content and length variation. RXA material is more affected by the hydrogen effect than the SRA material. Nevertheless, in comparison with data issued from out-of-reactor measurement, the impact of hydrides is not sufficient (with irradiation growth) to explain the post-irradiation examinations (PIE) results. To understand these differences, the oxide layer contribution must be quantified. Second, the impact of the oxide layer was therefore studied on RXA Zircaloy-4 strips. Corrosion tests have been performed in autoclave at 360°C in primary water (2 ppm Li-1000 ppm B-H2) on as-received and pre-hydrided materials. To obtain thicker oxide layer within a shorter duration, samples have been also oxidized in furnace at 415°C. Moreover, as no significant hydriding occurs during oxidation in air, we are able to characterize properly the specific effect of the oxide layer. As for hydrides' effect, an increase of strain is observed as the oxide thickness becomes thicker. The contributions of hydrides and oxide layer are then discussed with regard to the metallurgical properties of the alloy. Finally, all these results are compared with PIE observations. Free growth, hydride precipitation, and oxide thickness seem to be the three main parameters to explain the dimensional changes in Zircaloy-4 observed in reactor.

Download or read book Zirconium in the Nuclear Industry Tenth International Symposium written by A. M. Garde and published by ASTM International. This book was released on 1994 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components written by Manfred P. Puls and published by Springer Science & Business Media. This book was released on 2012-08-04 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: By drawing together the current theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys. Whilst the emphasis lies on zirconium alloys, the combination of both the empirical and mechanistic approaches creates a solid understanding that can also be applied to other hydride forming metals. This up-to-date reference focuses on documented research surrounding DHC, including current methodologies for design and assessment of the results of periodic in-service inspections of pressure tubes in nuclear reactors. Emphasis is placed on showing how our understanding of DHC is supported by progress in general understanding of such broad fields as the study of hysteresis associated with first order phase transformations, phase relationships in coherent crystalline metallic solids, the physics of point and line defects, diffusion of substitutional and interstitial atoms in crystalline solids, and continuum fracture and solid mechanics. Furthermore, an account of current methodologies is given illustrating how such understanding of hydrogen, hydrides and DHC in zirconium alloys underpins these methodologies for assessments of real life cases in the Canadian nuclear industry. The all-encompassing approach makes The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Component: Delayed Hydride Cracking an ideal reference source for students, researchers and industry professionals alike.

Download or read book Corrosion Abstracts written by and published by . This book was released on 1971 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deformation Mechanisms Texture and Anisotropy in Zirconium and Zircaloy written by Erich Tenckhoff and published by ASTM International. This book was released on 1988 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Coatings for Corrosion Protection written by Wolfram Fürbeth and published by MDPI. This book was released on 2021-01-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a significant issue in many industrial fields. Among other strategies, coatings are by far the most important technology for corrosion protection of metallic surfaces. The Special Issue “Advanced Coatings for Corrosion Protection” has been launched as a means to present recent developments in any type of advanced coating for corrosion protection. This book compiles 15 contributions on metallic, inorganic, polymeric and nanoparticle enhanced coatings that provide corrosion protection as well as other functionalities.

Download or read book Properties of UO2 written by J. Belle and published by . This book was released on 1957 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High strength Zirconium Alloys written by R. K. Wagner and published by . This book was released on 1959 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.

Download or read book Recent Developments in the Study of Recrystallization written by Peter Wilson and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization is a phenomenon moderately well documented in the geological and metallurgical literature. This book provides a timely overview of the latest research and methods in a variety of fields where recrystallization is studied and is an important factor. The main advantage of a new look at these fields is the rapid increase in modern techniques, such as TEM, spectrometers and modeling capabilities, all of which are providing us with far better images and analysis than ever previously possible. This book will be invaluable to a wide range of research scientists; metallurgists looking to improve properties of alloys, those interested in how the latest equipment may be used to image grains and to all those who work with frozen aqueous solutions where recrystallization may be a problem.

Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Corrosion of Zirconium written by L. E. Colteryahn and published by . This book was released on 1952 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Foundations of Materials Science written by Günter Gottstein and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them transmission electron microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.