Download or read book Study of the Design Theory for Front End CMOS Low Noise Amplifiers written by and published by . This book was released on 2003 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Low Noise Amplifiers for Ultra Wideband Communications written by Roberto Díaz Ortega and published by McGraw Hill Professional. This book was released on 2014-01-13 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge techniques for ultra-wideband, low-noise amplifier design This pioneering resource presents alternatives for implementing power- and area-efficient integrated low-noise amplifiers for ultra-wideband communications. Design methodologies for distributed amplifiers, feedback amplifiers, inductor structures with reduced area, and inductorless techniques are discussed. Cowritten by international experts in industry and academia, this book addresses the state of the art in integrated circuit design in the context of emerging systems. Design of Low-Noise Amplifiers for Ultra-Wideband Communications covers: Ultra-wideband overview and system approach Distributed amplifiers Wideband low-noise amplifiers Feedback wideband low-noise amplifiers Inductorless techniques

Download or read book Design of 2 4 GHZ CMOS Frontend for Bluetooth written by Florian Krug and published by diplom.de. This book was released on 2001-06-06 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: The Bluetooth wireless technology is the worlds new short-range RF transmission standard for small form factor, low-cost, short-range radio links between portable or desktop devices. The technology promises to eliminate the confusion of cables, connectors and protocols confounding communications between today high tech products. In the first step a 2.45 GHz Low Noise Amplifier (LNA), intended for use in a Bluetooth receiver, has been designed in a standard 0.18 um CMOS process. The amplifier provides a simulated switchable forward voltage gain of +16 / -7.7 dB with a simulated noise Figure (NF) of only 3 dB while drawing 2.8 mA from a 1.8 V supply. The die area of the LNA (pads included) is 0.79 mm2. In the second step a 2.45 GHz Power Amplifier (PA), also intended for the Bluetooth standard, has been designed in the same 0.18 um CMOS process as for the LNA. The class-A PA achieves a simulated forward gain (S21) of 23 dB and a simulated output 1 dB compression point (P1dB ) of 5.5 dBm, with a power-added efficiency (PAE) of 23 % while drawing 15.8 mA from a 1.8 V supply. The die area of the PA (pads included) is 2.1 mm2. Inhaltsverzeichnis:Table of Contents: 1.Introduction1 1.1Motivation1 1.2Organization2 2.The Bluetooth standard3 2.1Bluetooth as branding-name3 2.2Bluetooth RF requirements4 2.3System design4 2.3.1Receiver architectures4 2.3.2Transmitter architectures6 3.RF CMOS technology9 3.1The foundry9 3.1.1Technology overview9 3.1.2Process Characteristic9 3.2Design Flow10 3.2.1Cadence10 3.2.2SpectreRF10 4.Integrated spiral inductors11 4.1View and physical dimension of spiral11 4.2Model for on-chip spiral inductors12 5.Low Noise Amplifier13 5.1Architecture choices13 5.1.1Recent studies13 5.1.2LNA Architectures13 5.1.3Architecture properties14 5.1.4Architecture choice14 5.2A little piece of theory15 5.2.1Standard MOS noise model15 5.2.2Noise Figure16 5.2.3Input impedance16 5.2.4Voltage Gain18 5.2.5Stability19 5.2.6Noise Figure20 5.3Design approach for the LNA21 5.3.1Circuit topology21 5.3.2RF circuit design strategy21 5.3.3DC operating point design strategy23 5.3.4Input matching24 5.3.5Voltage gain25 5.3.6Noise Figure26 5.3.7Stability27 5.3.8LNA core schematics with component values28 5.4Design approach for the attenuation path of the LNA29 5.4.1Circuit Topology29 5.4.2Switching network29 5.4.3Input matching31 5.4.4Attenuation32 5.4.5Switchable LNA schematics with [...]

Download or read book Design of CMOS Low Noise Amplifier and Mixer for 60GHz Millimeter Wave Front End written by 蔡牧瑋 and published by . This book was released on 2010 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Low Noise Amplifiers for Single and Multiband Applications A Comprehensive Design Approach written by Norlaili Mohd Noh, Farshad Eshghabadi, Arjuna Marzuki and published by Penerbit USM. This book was released on 2023-10-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

Download or read book Low noise and Low power CMOS Amplifiers Analog Front ends and Systems for Biomedical Signal Acquisition written by Jakob M. Tomasik and published by Logos Verlag Berlin. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the analysis, design and realisation of biomedical amplifiers and analog front-end building blocks implemented in CMOS technology. In this context, a 1.2 V, 130 nm CMOS operational amplifier design is presented which allows to adjust its noise and power specifications. The amplifier and front-end concepts were used in the design of biomedical system-on-chip solutions that include calibration and DC-offset supression techniques.

Download or read book Low Noise Wide Band Amplifiers in Bipolar and CMOS Technologies written by Zhong Yuan Chong and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.

Download or read book Design of Rf Cmos Low Noise Amplifiers written by Changgui Lin and published by LAP Lambert Academic Publishing. This book was released on 2010-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of RF CMOS Low Noise Amplifiers presents the results of research on a gain-boosted common-gate RF low noise amplifier (LNA) in CMOS technology. The book covers noise analysis, design techniques, prototyping of the LNA, as well as broadband modeling for on-chip spiral differential inductors. Beginning with a technical review of LNA architectures and inductor modeling techniques, the authors then introduce a scalable lumped circuit model for octagonal differential inductors. The effect of high frequency current crowding, i.e. proximity effect, is taken into consideration in the lumped circuit model. Subsequently, the book offers comprehensive noise analysis of the LNA and discusses design techniques for noise reduction. Measurement results for a 2.4GHz CMOS LNA and conclusions are included. The book is intended for anyone who is interested in learning essentials of RF CMOS LNA design and basic mathematics of on-chip inductor broadband modeling. The book is also beneficial to engineers and researchers in CMOS RFIC design - especially for WLAN, Bluetooth, and emerging wireless communication applications.

Download or read book CMOS Low Noise Amplifier Design for Wireless Sensor Networks written by Richard Lu and published by . This book was released on 2003 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Millimeter Wave Integrated Circuits written by Mladen Božanić and published by Springer Nature. This book was released on 2020-03-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the methodologies that are used for effective research, design and innovation in the vast field of millimeter-wave circuits, and describes how these have to be modified to fit the uniqueness of high-frequency nanoelectronics design. Each chapter focuses on a specific research challenge related to either small form factors or higher operating frequencies. The book first examines nanodevice scaling and the emerging electronic design automation tools that can be used in millimeter-wave research, as well as the singular challenges of combining deep-submicron and millimeter-wave design. It also demonstrates the importance of considering, in the millimeter-wave context, system-level design leading to differing packaging options. Further, it presents integrated circuit design methodologies for all major transceiver blocks typically employed at millimeter-wave frequencies, as these methodologies are normally fundamentally different from the traditional design methodologies used in analogue and lower-frequency electronics. Lastly, the book discusses the methodologies of millimeter-wave research and design for extreme or harsh environments, rebooting electronics, the additional opportunities for terahertz research, and the main differences between the approaches taken in millimeter-wave research and terahertz research.

Download or read book Low Noise Wide Band Amplifiers in Bipolar and CMOS Technologies written by Zhong Yuan Chong and published by Springer. This book was released on 2013-01-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.

Download or read book Proceedings written by and published by . This book was released on 2008 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of CMOS RFIC Ultra Wideband Impulse Transmitters and Receivers written by Cam Nguyen and published by Springer. This book was released on 2017-03-21 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of ultra-wideband (UWB) impulse-based transmitter and receiver frontends, operating within the 3.1-10.6 GHz frequency band, using CMOS radio-frequency integrated-circuits (RFICs). CMOS RFICs are small, cheap, low power devices, better suited for direct integration with digital ICs as compared to those using III-V compound semiconductor devices. CMOS RFICs are thus very attractive for RF systems and, in fact, the principal choice for commercial wireless markets. The book comprises seven chapters. The first chapter gives an introduction to UWB technology and outlines its suitability for high resolution sensing and high-rate, short-range ad-hoc networking and communications. The second chapter provides the basics of CMOS RFICs needed for the design of the UWB RFIC transmitter and receiver presented in this book. It includes the design fundamentals, lumped and distributed elements for RFIC, layout, post-layout simulation, and measurement. The third chapter discusses the basics of UWB systems including UWB advantages and applications, signals, basic modulations, transmitter and receiver frontends, and antennas. The fourth chapter addresses the design of UWB transmitters including an overview of basic components, design of pulse generator, BPSK modulator design, and design of a UWB tunable transmitter. Chapter 5 presents the design of UWB receivers including the design of UWB low-noise amplifiers, correlators, and a UWB 1 receiver. Chapter 6 covers the design of a UWB uniplanar antenna. Finally, a summary and conclusion is given in Chapter 7.

Download or read book Implementation of CMOS Low Noise Amplifiers Active Balun and Oscillators for RF Front end System Applications written by 李建宜 and published by . This book was released on 2010 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Design of Analog Integrated Circuits written by Paul R. Gray and published by John Wiley & Sons. This book was released on 2024-01-04 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: ANALYSIS AND DESIGN OF ANALOG INTEGRATED CIRCUITS Authoritative and comprehensive textbook on the fundamentals of analog integrated circuits, with learning aids included throughout Written in an accessible style to ensure complex content can be appreciated by both students and professionals, this Sixth Edition of Analysis and Design of Analog Integrated Circuits is a highly comprehensive textbook on analog design, offering in-depth coverage of the fundamentals of circuits in a single volume. To aid in reader comprehension and retention, supplementary material includes end of chapter problems, plus a Solution Manual for instructors. In addition to the well-established concepts, this Sixth Edition introduces a new super-source follower circuit and its large-signal behavior, frequency response, stability, and noise properties. New material also introduces replica biasing, describes and analyzes two op amps with replica biasing, and provides coverage of weighted zero-value time constants as a method to estimate the location of dominant zeros, pole-zero doublets (including their effect on settling time and three examples of circuits that create doublets), the effect of feedback on pole-zero doublets, and MOS transistor noise performance (including a thorough treatment on thermally induced gate noise). Providing complete coverage of the subject, Analysis and Design of Analog Integrated Circuits serves as a valuable reference for readers from many different types of backgrounds, including senior undergraduates and first-year graduate students in electrical and computer engineering, along with analog integrated-circuit designers.

Download or read book Advances in VLSI and Embedded Systems written by Anand D. Darji and published by Springer Nature. This book was released on 2022-11-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the 2nd International Conference on Advances in VLSI and Embedded Systems (AVES 2021). This book covers cutting-edge original research in VLSI design, devices and emerging technologies, embedded systems, and CAD for VLSI. To address the demand for complex and high-functionality systems as well as portable consumer electronics, the contents focus on advanced topics of circuit and systems design, fabrication, testing, and standardization. This book is useful for students, researchers as well as industry professionals interested in emerging trends in VLSI and embedded systems.

Download or read book Design Considerations for Highly Linear CMOS Low Noise Amplifiers written by Dan Nicholson and published by . This book was released on 2005 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: