Download or read book Study the Power Flow Control of a Power System with Unified Power Flow Controller written by Vakula Peesari and published by . This book was released on 2010 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power systems is a large interconnected network that requires a careful design to maintain the system with continuous power flow operation without any limitations. Flexible Alternating Current Transmission System (FACTS) is an application of a power electronics device to control the power flow and to improve the system stability of a power system. Unified Power Flow Controller (UPFC) is a versatile device in the FACTS family of controllers which has the ability to simultaneously control all the transmission parameters of power systems i.e. voltage, impedance and phase angle which determines the power flow of a transmission line. This project proposes a case study to control the power flow of a power system with UPFC. In this study, I am considering a standard 5-bus network for the analysis. Power flow equations are solved using Newton Raphson's algorithm and the simulations of the algorithm are done in MATLAB. The results of the network with and without UPFC are compared in terms of active and reactive power flow in the transmission line at the bus to analyze the performance of UPFC.

Download or read book Unified Power Flow Controller Technology and Application written by Jijun Yin and published by Academic Press. This book was released on 2017-06-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller Technology and Application provides comprehensive coverage on UPFC technology, providing a range of topics, including design principle, control and protection, and insulation coordination. It summarizes all the most up-to-date research and practical achievements that are related to UPFC and MMC technology, including test techniques for main components, closed-loop test techniques for control and protection systems, and onsite techniques for implementing UPFC projects. The book is an essential reference book for both academics and engineers working in power system protection control, power system planning engineers, and HVDC FACTS related areas. Readers will not only obtain the detailed information regarding theoretical analysis and practical application of UPFC, but also the control mechanism of advanced MMC technology, both of which are not common topics in previously published books. Shows how to use modular multilevel converters (MMC) to implement UPFC that lead to cost-effective and reliable systems Draws from the most up-to-date research and practical applications Teaches electromechanical/electromagnetic transient simulation techniques and real-time closed-loop simulation test techniques of the MMC based UPFC

Download or read book Study of Power Flow Control by Unified Power Flow Controller written by Chien Meng Yam and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Flow Control Solutions for a Modern Grid Using SMART Power Flow Controllers written by Kalyan K. Sen and published by John Wiley & Sons. This book was released on 2021-12-13 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers Provides students and practicing engineers with the foundation required to perform studies of power system networks and mitigate unique power flow problems Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers is a clear and accessible introduction to power flow control in complex transmission systems. Starting with basic electrical engineering concepts and theory, the authors provide step-by-step explanations of the modeling techniques of various power flow controllers (PFCs), such as the voltage regulating transformer (VRT), the phase angle regulator (PAR), and the unified power flow controller (UPFC). The textbook covers the most up-to-date advancements in the Sen transformer (ST), including various forms of two-core designs and hybrid architectures for a wide variety of applications. Beginning with an overview of the origin and development of modern power flow controllers, the authors explain each topic in straightforward engineering terms—corroborating theory with relevant mathematics. Throughout the text, easy-to-understand chapters present characteristic equations of various power flow controllers, explain modeling in the Electromagnetic Transients Program (EMTP), compare transformer-based and mechanically-switched PFCs, discuss grid congestion and power flow limitations, and more. This comprehensive textbook: Describes why effective Power Flow Controllers should be viewed as impedance regulators Provides computer simulation codes of the various power flow controllers in the EMTP programming language Contains numerous worked examples and data cases to clarify complex issues Includes results from the simulation study of an actual network Features models based on the real-world experiences the authors, co-inventors of first-generation FACTS controllers Written by two acknowledged leaders in the field, Power Flow Control Solutions for a Modern Grid using SMART Power Flow Controllers is an ideal textbook for graduate students in electrical engineering, and a must-read for power engineering practitioners, regulators, and researchers.

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-18 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: FACTS are one aspect of power electronics revolution that is taking place in all areas of electrical energy. A variable of powerful semiconductor devices not only offer the advantage of high speed and reliability of switching but, more importantly, the opportunity offered by a variety of innovative circuit concepts based on these power devices enhance the value of electric energy. In generation area, the potential application of power electronics is largely in renewable generation. Photovoltaic and fuel cells requires conversion of dc to ac. Generation with variable speed is necessary for economic viability of wind and small hydro generators. Variable-speed wind generators and small hydro generators requires conversion of variable frequency ac to power system frequency. These applications of power electronics in renewable generation area require converter sizes in the range of few kilowatts to few megawatts. In coming decades, electrical energy storage is expected to be widely used in power systems as capacitor, battery and superconducting magnet technologies move forward. Batteries are widely used already for emergency power supplies. These require ac/dc/ac converters in the range of a few kilowatts to a few tens of megawatts. On the other hand, variable speed hydro storage requires converters of up to a few hundred megawatts. In transmission area, application of power electronics consists of High Voltage Direct Current (HVDC) power transmission and FACTS. HVDC is often an economical way to interconnect certain power systems, which are suited in different regions separated by long distances or those have different frequencies or incompatible frequency control. HVDC involves conversion of ac to dc at one end and conversion of dc to ac at the other end. What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. · Part 1: Gives the description of optimal control design. · Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book 2006 Proceedings of the Eleventh International Middle East Power Systems Conference written by IEEE Staff and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Unified Power Flow Controller Model Study written by Juan C. Etheridge and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Decentralized Control and Placement of Multiple Unified Power Flow Controllers written by Jianjun Guo and published by . This book was released on 2006 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The dissertation, consisting of 4 papers, presents the results of research on the nonlinear control of Flexible AC Transmission System (FACTS) devices, the optimal placement of Unified Power Flow Controller (UPFC) in power networks and the decentralized control of UPFCs for damping interarea oscillations of power networks"--Abstract, leaf iv.

Download or read book Flexible AC Transmission Systems written by Bjarne R. Andersen and published by Springer. This book was released on 2020-07-17 with total page 1117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Green Book offers the outstanding expertise of CIGRE professionals about Flexible AC Transmission Systems (FACTS) in one concise handbook. FACTS are used to enhance AC power networks, by providing fast control of power flows and AC voltage and AC phase angles. They can be used to defer the need for additional power lines, by controlling the power flow on lines to achieve maximum utilisation of the existing lines, and/or by improving the power quality, e.g. when large disturbing loads are connected to the network. This Green Book on FACTS provides comprehensive information about the use of Power Electronics for AC system control and for Power Quality Improvement in its over 1000 pages. This book has been written by experts in the field, who come from Transmission System Operators, Network owners, manufacturers, and consultants in this field. This Green Book on FACTS covers a large range of topics in its 6 sections, as follows: AC Systems Characteristics, AC network control using conventional means and AC network control using FACTS Controllers Technical Descriptions of all current FACTS controllers, power electronic Topologies for FACTS, SVCs, STATCOM, TCSC and the UPFC and its variations Application Examples of all FACTS controllers, which include a description of controllers using saturation of iron as well as examples of all current FACTS controllers Planning and Procurement, including economic appraisals and cost benefit analysis, planning studies, environmental considerations, functional specifications Implementation of FACTS controllers, including integration and design studies, equipment design and testing and commissioning FACTS operation and lifetime management.

Download or read book Advances in Systems Control and Automation written by Avinash Konkani and published by Springer. This book was released on 2017-12-11 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the ETAEERE 2016 conference. The book aims to shed light on different systems or machines along with their complex operation, behaviors, and linear–nonlinear relationship in different environments. It covers problems of multivariable control systems and provides the necessary background for performing research in the field of control and automation. Aimed at helping readers understand the classical and modern design of different intelligent automated systems, the book presents coverage on the control of linear and nonlinear systems, intelligent systems, stochastic control, knowledge-based systems applications, fault diagnosis and tolerant control, real-time control applications, etc. The contents of this volume will prove useful to researchers and professionals alike.

Download or read book Advanced Solutions in Power Systems written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2016-09-27 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight on both classical means and new trends in the application of power electronic and artificial intelligence techniques in power system operation and control This book presents advanced solutions for power system controllability improvement, transmission capability enhancement and operation planning. The book is organized into three parts. The first part describes the CSC-HVDC and VSC-HVDC technologies, the second part presents the FACTS devices, and the third part refers to the artificial intelligence techniques. All technologies and tools approached in this book are essential for power system development to comply with the smart grid requirements. Discusses detailed operating principles and diagrams, theory of modeling, control strategies and physical installations around the world of HVDC and FACTS systems Covers a wide range of Artificial Intelligence techniques that are successfully applied for many power system problems, from planning and monitoring to operation and control Each chapter is carefully edited, with drawings and illustrations that helps the reader to easily understand the principles of operation or application Advanced Solutions in Power Systems: HVDC, FACTS, and Artificial Intelligence is written for graduate students, researchers in transmission and distribution networks, and power system operation. This book also serves as a reference for professional software developers and practicing engineers.

Download or read book Facts Study and Simulation written by Antoine Pochon and published by . This book was released on 2000 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cognitive Informatics and Soft Computing written by Pradeep Kumar Mallick and published by Springer. This book was released on 2018-08-11 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents new approaches and methods for solving real-world problems. It offers, in particular, exploratory research that describes novel approaches in the fields of Cognitive Informatics, Cognitive Computing, Computational Intelligence, Advanced Computing, Hybrid Intelligent Models and Applications. New algorithms and methods in a variety of fields are also presented, together with solution-based approaches. The topics addressed include various theoretical aspects and applications of Computer Science, Artificial Intelligence, Cybernetics, Automation Control Theory and Software Engineering.

Download or read book Applications of Unified Power Flow Controllers in Power System Stability Enhancement written by Surachai Limyingcharoen and published by . This book was released on 1999 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Control of a Unified Power Flow Controller System written by Xin Zhu and published by . This book was released on 1998 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unified Power Flow Controller Modeling Stability Analysis Control Strategy and Control System Design written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Static and Dynamic Impact of Unified Power Flow Controller UPFC in Electric Transmission System written by Zulkifli Dollah and published by . This book was released on 2008 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller (UPFC) is a part of the Flexible AC Transmission System (FACTS). The main function of UPFC is to control the real and reactive power flow in transmission system, at the same time UPFC will control the voltage at the bus where it's placed. The main purpose of this project is to analyses the static and dynamic impact of UPFC in transmission line. There have two software that used in this project which are MATLAB and PSCAD/EMTDC software. The MATLAB software used to get the data that can be used to model load flow by using PSCAD/EMTDC software. This modeling is called the steady state model (static). The model in PSCAD used to analyses the impact of UPFC in electric transmission line. For dynamic analyses, the model in steady state condition will apply fault. The analysis for the system is made and then the UPFC is applying to the system and the result will be analyzed. In this project the optimum location for placement of UPFC also has been discuss details. The simulation results show that the UPFC can control the active power, reactive power and the bus voltage which connected to UPFC.