Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Science & Business Media. This book was released on 2009 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bird's-eye view of the developmental trends and problems of recent photovoltaics is presented. The worldwide effort to develop high-efficiency low-cost PV modules, making use of most efficient solar cells and clever low-cost solar concentrators is described.
Download or read book Physics and Technology of Silicon Carbide Devices written by George Gibbs and published by . This book was released on 2016-10-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.
Download or read book Silicon written by Paul Siffert and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: With topics ranging from epitaxy through lattice defects and doping to quantum computation, this book provides a personalized survey of the development and use of silicon, the basis for the revolutionary changes in our lives sometimes called "The Silicon Age." Beginning with the very first developments more than 50 years ago, this reports on all aspects of silicon and silicon technology up to its use in exciting new technologies, including a glance at possible future developments.
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Crystalline Silicon Solar Cells written by Adolf Goetzberger and published by . This book was released on 1998 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon and Oxide Nanostructures written by Noorhana Yahya and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers all aspects of carbon and oxide based nanostructured materials. The topics include synthesis, characterization and application of carbon-based namely carbon nanotubes, carbon nanofibres, fullerenes, carbon filled composites etc. In addition, metal oxides namely, ZnO, TiO2, Fe2O3, ferrites, garnets etc., for various applications like sensors, solar cells, transformers, antennas, catalysts, batteries, lubricants, are presented. The book also includes the modeling of oxide and carbon based nanomaterials. The book covers the topics: Synthesis, characterization and application of carbon nanotubes, carbon nanofibres, fullerenes Synthesis, characterization and application of oxide based nanomaterials. Nanostructured magnetic and electric materials and their applications. Nanostructured materials for petro-chemical industry. Oxide and carbon based thin films for electronics and sustainable energy. Theory, calculations and modeling of nanostructured materials.
Download or read book Diamond Films written by Koji Kobashi and published by Elsevier. This book was released on 2010-07-07 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Discusses the most advanced techniques for diamond growth - Assists diamond researchers in deciding on the most suitable process conditions - Inspires readers to devise new CVD (chemical vapor deposition Ever since the early 1980s, and the discovery of the vapour growth methods of diamond film, heteroexpitaxial growth has become one of the most important and heavily discussed topics amongst the diamond research community. Kobashi has documented such discussions with a strong focus on how diamond films can be best utilised as an industrial material, working from the premise that crystal diamond films can be made by chemical vapour disposition. Kobashi provides information on the process and characterization technologies of oriented and heteroepitaxial growth of diamond films.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Plasma Science and Technology for Emerging Economies written by Rajdeep Singh Rawat and published by Springer. This book was released on 2017-10-07 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights plasma science and technology-related research and development work at institutes and universities networked through Asian African Association for Plasma Training (AAAPT) which was established in 1988. The AAAPT, with 52 member institutes in 24 countries, promotes the initiation and intensification of plasma research and development through cooperation and technology sharing. With 13 chapters on fusion-relevant, laboratory and industrial plasmas for wide range of applications and basic research and a chapter on AAAPT network, it demonstrates how, with collaborations, high-quality, industrially relevant academic and scientific research on fusion, industrial and laboratory plasmas and plasma diagnostics can be successfully pursued in small research labs. These plasma sciences and technologies include pioneering breakthroughs and applications in (i) fusion relevant research in the quest for long-term, clean energy source development using high-temperature, high- density plasmas and (ii) multibillion-dollar, low-temperature, non-equilibrium and thermal industrial plasmas used in processing, synthesis and electronics.
Download or read book Emerging Trends in Nanotechnology written by Zishan Husain Khan and published by Springer Nature. This book was released on 2021-02-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses new trends in nanotechnology. It covers a wide range of topics starting from applications of nanomaterials in perovskite solar cells, pharmacy, and dentistry to self-assembled growth of GaN nanostructures on flexible metal foils by laser molecular beam epitaxy. It also includes other interesting topics such as advancement in carbon nanotubes; processing techniques, purification and industrial applications, metal di-chalcogenides for waste water treatment and recent advancement in nanostructured-based electrochemical genosensors for pathogen detection and many more. The book will be of great interest to researchers, professionals and students working in the areas of nanomaterials and nanotechnology.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diamond like Carbon Films written by Yuto S. Tanaka and published by Nova Biomedical Books. This book was released on 2012-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research from across the globe in the study of diamond-like carbon films. Topics discussed include the peculiarities of ion-beam synthesis of carbon-based phases; electron field emission properties of non-metal and metal doped diamond like carbon; internal stress and its reduction of hydrogenated diamond-like carbon thin films deposited by plasma CVD methods; incorporating crystalline diamond particles in diamond-like carbon films to improve their properties and diamond-like carbon films applied as an alignment layer for LCDs.
Download or read book Ionized Physical Vapor Deposition written by and published by Academic Press. This book was released on 1999-10-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the first comprehensive look at a pivotal new technology in integrated circuit fabrication. For some time researchers have sought alternate processes for interconnecting the millions of transistors on each chip because conventional physical vapor deposition can no longer meet the specifications of today's complex integrated circuits. Out of this research, ionized physical vapor deposition has emerged as a premier technology for the deposition of thin metal films that form the dense interconnect wiring on state-of-the-art microprocessors and memory chips.For the first time, the most recent developments in thin film deposition using ionized physical vapor deposition (I-PVD) are presented in a single coherent source. Readers will find detailed descriptions of relevant plasma source technology, specific deposition systems, and process recipes. The tools and processes covered include DC hollow cathode magnetrons, RF inductively coupled plasmas, and microwave plasmas that are used for depositing technologically important materials such as copper, tantalum, titanium, TiN, and aluminum. In addition, this volume describes the important physical processes that occur in I-PVD in a simple and concise way. The physical descriptions are followed by experimentally-verified numerical models that provide in-depth insight into the design and operation I-PVD tools.Practicing process engineers, research and development scientists, and students will find that this book's integration of tool design, process development, and fundamental physical models make it an indispensable reference.Key Features:The first comprehensive volume on ionized physical vapor depositionCombines tool design, process development, and fundamental physical understanding to form a complete picture of I-PVDEmphasizes practical applications in the area of IC fabrication and interconnect technologyServes as a guide to select the most appropriate technology for any deposition application*This single source saves time and effort by including comprehensive information at one's finger tips*The integration of tool design, process development, and fundamental physics allows the reader to quickly understand all of the issues important to I-PVD*The numerous practical applications assist the working engineer to select and refine thin film processes
Download or read book New Carbons Control of Structure and Functions written by Michio Inagaki and published by Elsevier. This book was released on 2000-04-20 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery of fullerenes and nanotubes has greatly stimulated the interest of scientists and engineers in carbon materials, and has resulted in much scientific research. These materials have provided us with many interesting ideas and potential applications, some of them practical and some simply dreams for the future. In the early 1960s, carbon fibers, glass-like carbons and pyrolytic carbons were developed which were quite different from the carbon materials that had previously been used. Carbon fibers exhibited surprisingly good mechanical properties, glass-like carbons exhibited brittle fracture resulting in a conchoidal fracture surface similar to sodium glass, and giving no carbon dust, and pyrolytic carbons were produced by a new production process of chemical vapour deposition and showed very high anisotropy. These carbons materials made a great impact not only on the carbon community who had been working on carbon materials but also on people working in the fields of materials science and engineering. They were used to develop a variety of new applications in technological fields, such as semiconductors, microelectronics, aerospace and high temperature, etc. These newly developed carbon materials were called NEW CARBONS, in comparison with carbon materials such as artificial graphites represented by graphite electrodes, carbon blacks and activated carbons, which maybe thought of as CLASSICAL CARBONS. Later, other new carbons, such as activated carbons and those with novel functions, isotropic high-density graphites, intercalation compounds, various composites, etc., were developed. In 1994, Professor Michio Inagaki published a book entitled "New Carbon Materials — Structure and Functions" with his friend Professor Yoshihiro Hishiyama of Musashi Institute of Technology, published by Gihoudou Shuppan in Japanese. However, progress in the fields of these new carbons is so rapid that the previous book is already out of date. For this reason the author has decided to write an English text on New Carbons. The text focuses on New Carbons based on hexagonal networks of carbon-atoms, i.e. graphite-related materials. The fundamental concept underlying this book is that the structure and functions of these materials are principally governed by their texture. The aim is to give readers a comprehensive understanding of New Carbons through the description of their structure and texture, along with the properties that are largely dependent on them.
Download or read book Glow Discharge Optical Emission Spectroscopy written by Richard Payling and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glow discharge optical emission spectroscopy (GDOES) is an essential technique for the direct analysis of bulk solids, for elemental surface analysis and for the depth profiling of thin films and industrial coatings. The technique has shown rapid growth in numbers of instruments, in breadth of applications, in improved quantification in recent years and is now a recognised technique within the ISO, with two international standards. Glow Discharge Optical Emission Spectroscopy: A Practical Guide takes the reader on a journey through instrument operation, sample preparation, analysis, and reporting results. It follows two sets of samples through the whole process of analysis, brass samples for bulk analysis, and zinc-coated steel for depth profiling. Procedures are consistent with recent ISO standards and each step is loaded with hands-on tips and theoretical insight. The book also includes unique data tables on spectral interferences, molecular bands, self-absorption and relative sputtering rates. This book is designed for those using or managing GDOES instruments and for students interested in learning the technique from a hands-on perspective. It is also an invaluable aid to those considering the purchase of a GDOES instrument, or those using GDOES results, to understand in detail how the technique works and what is involved in maintaining the instrument and achieving high quality results.
Download or read book Advanced Plasma Technology written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of internationally renowned scientists discuss the latest results in plasma technology. This volume has been compiled with both a didactic approach and an overview of the newest achievements for industrial applications. It is divided into two main sections. One is focused on fundamental technology, including plasma production and control, high-pressure discharges, modeling and simulation, diagnostics, dust control, and etching. The section on application technology covers polymer treatments, silicon solar cell, coating and spray, biomaterials, sterilization and waste treatment, plasma propulsion, plasma display panels, and anti-corrosion coatings. The result is an indispensable work for physicists, chemists and engineers involved in the field of plasma technology.
Download or read book Silicon Carbide Biotechnology written by Stephen E. Saddow and published by Elsevier. This book was released on 2011-11-14 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) is a wide-band-gap semiconductor biocompatible material that has the potential to advance advanced biomedical applications. SiC devices offer higher power densities and lower energy losses, enabling lighter, more compact and higher efficiency products for biocompatible and long-term in vivo applications ranging from heart stent coatings and bone implant scaffolds to neurological implants and sensors. The main problem facing the medical community today is the lack of biocompatible materials that are also capable of electronic operation. Such devices are currently implemented using silicon technology, which either has to be hermetically sealed so it cannot interact with the body or the material is only stable in vivo for short periods of time. For long term use (permanent implanted devices such as glucose sensors, brain-machine-interface devices, smart bone and organ implants) a more robust material that the body does not recognize and reject as a foreign (i.e., not organic) material is needed. Silicon Carbide has been proven to be just such a material and will open up a whole new host of fields by allowing the development of advanced biomedical devices never before possible for long-term use in vivo. This book not only provides the materials and biomedical engineering communities with a seminal reference book on SiC that they can use to further develop the technology, it also provides a technology resource for medical doctors and practitioners who are hungry to identify and implement advanced engineering solutions to their everyday medical problems that currently lack long term, cost effective solutions. - Discusses Silicon Carbide biomedical materials and technology in terms of their properties, processing, characterization, and application, in one book, from leading professionals and scientists - Critical assesses existing literature, patents and FDA approvals for clinical trials, enabling the rapid assimilation of important data from the current disparate sources and promoting the transition from technology research and development to clinical trials - Explores long-term use and applications in vivo in devices and applications with advanced sensing and semiconducting properties, pointing to new product devekipment particularly within brain trauma, bone implants, sub-cutaneous sensors and advanced kidney dialysis devices
