Download or read book Study Methods to Characterize and Implement Thermography Nondestructive Evaluation Nde written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-16 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The limits and conditions under which an infrared thermographic nondestructive evaluation can be utilized to assess the quality of aerospace hardware is demonstrated in this research effort. The primary focus of this work is on applying thermography to the inspection of advanced composite structures such as would be found in the International Space Station Instrumentation Racks, Space Shuttle Cargo Bay Doors, Bantam RP-1 tank or RSRM Nose Cone. Here, the detection of delamination, disbond, inclusion and porosity type defects are of primary interest. In addition to composites, an extensive research effort has been initiated to determine how well a thermographic evaluation can detect leaks and disbonds in pressurized metallic systems "i.e. the Space Shuttle Main Engine Nozzles". In either case, research into developing practical inspection procedures was conducted and thermographic inspections were performed on a myriad of test samples, subscale demonstration articles and "simulated" flight hardware. All test samples were fabricated as close to their respective structural counterparts as possible except with intentional defects for NDE qualification. As an added benefit of this effort to create simulated defects, methods were devised for defect fabrication that may be useful in future NDE qualification ventures. Walker, James L. Marshall Space Flight Center...

Download or read book Nondestructive Evaluation of Materials by Infrared Thermography written by Xavier P.V. Maldague and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: With national trade barriers falling, causing the expansion of the com petitive global market, the question of quality control has become an essential issue for the 1990s. The time where the promise was to replace a product if it does not work seems to have passed; what is more impor tant now is not so much a reduction in what is going wrong but an increase of what is going right the first time (Feigenbaum 1990). This new trend is sometimes referred to as total quality. Among the many advantages ofthis zero-defect manufacturing policy, we can enumerate (Laurin 1990): superior marketability of wholly de pendable products, enormous gain in productivity, elimination of waste ful cost in replacing poor quality work and retrofitting rejected products from the field. Although total quality is a relatively new and attractive concept for mass products such as cars, consumer electronics and per sonal computers, in many fields, mainly aerospace and military, it has been the rule for years because of security reasons.

Download or read book Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization written by Chi-hau Chen and published by World Scientific. This book was released on 2007 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.

Download or read book Thermography for Nondestructive Evaluation NDE written by H. Thomas Yolken and published by . This book was released on 2001 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nondestructive Testing of Materials and Structures written by Oral Büyüköztürk and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.

Download or read book Theory and Practice of Infrared Technology for Nondestructive Testing written by Xavier Maldague and published by Wiley-Interscience. This book was released on 2001-04-30 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes fundamental concepts of theory, instrumentation, and experimental practice as well as practical applications. An important chapter setting the book apart from other publications describes the properties of materials and presents case studies from industry. In addition, a program called IRNDT accompanies the book and is available on the Wiley ftp site. The program includes an image bank that can be used to test the principles covered in the book. * All chapters end with summaries, problems, and questions. * Authored by an acknowledged expert in the field. * Material draws on case studies to illustrate major points.

Download or read book Advanced Nondestructive Evaluation II written by Seung-Seok Lee and published by World Scientific. This book was released on 2008 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises papers presented at the 2nd International Conference on Advanced Nondestructive Evaluation (ANDE 2007) held in Busan, Korea, on October 17-19, 2007. Many of the excellent papers included in this book show the current state of nondestructive technologies, which are experiencing rapid progress with the integration of emerging technologies in various fields. As such, this volume provides an avenue for both specialists and scholars to share their ideas and the results of their findings in the field of nondestructive evaluation.

Download or read book Handbook of Nondestructive Evaluation 4 0 written by Norbert Meyendorf and published by Springer. This book was released on 2022-03-09 with total page 1263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook comprehensively covers the cutting-edge trends and techniques essential for the integration of nondestructive evaluation (NDE) into the changing face of the modern industrial landscape. In particular, it delves into the marriage of NDE with new techniques in e.g. data mining, cloud computing and autonomous operation, highlighting the potential for cyber-physical controlled production and discussing the myriad possible applications across many different industries. The Handbook of NDE 4.0 centers around the Internet of Things and Industry 4.0 – the next generation of industrial production encompassing all aspects of networking across all industrial areas. It discusses the adaptation of existing NDE techniques to emerging new technological areas, such as 3D printing, via the introduction of cyber systems into the inspection and maintenance processes. In addition, the handbook covers topics such as the management and processing of big data with respect to real-time monitoring of structural integrity and reliable inspection of individual components. Remote NDE to include competence not available on-site will be a potential technique to increase reliability of NDE inspections by integrating additional specialist inputs into the decision process by methods such as telepresence, thereby better leveraging the scarce resources of senior inspectors into industrial inspections at multiple sites. The handbook houses a wealth of essential information to help academics, industry professionals and entrepreneurs navigate through this burgeoning new field. The material in this handbook is presented with the intention of ultimately improving human safety through reliable inspections and dependable maintenance of critical infrastructure, while also enhancing business value through reduced downtime, affordable maintenance, and talent optimization.

Download or read book Defect Detection in Infrared Thermography by Deep Learning Algorithms written by Qiang Fang and published by . This book was released on 2021 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive evaluation (NDE) is a field to identify all types of structural damage in an object of interest without applying any permanent damage and modification. This field has been intensively investigated for many years. The infrared thermography (IR) is one of NDE technology through inspecting, characterize and analyzing defects based on the infrared images (sequences) from the recordation of infrared light emission and reflection to evaluate non-self-heating objects for quality control and safety assurance. In recent years, the deep learning field of artificial intelligence has made remarkable progress in image processing applications. This field has shown its ability to overcome most of the disadvantages in other approaches existing previously in a great number of applications. Whereas due to the insufficient training data, deep learning algorithms still remain unexplored, and only few publications involving the application of it for thermography nondestructive evaluation (TNDE). The intelligent and highly automated deep learning algorithms could be coupled with infrared thermography to identify the defect (damages) in composites, steel, etc. with high confidence and accuracy. Among the topics in the TNDE research field, the supervised and unsupervised machine learning techniques both are the most innovative and challenging tasks for defect detection analysis. In this project, we construct integrated frameworks for processing raw data from infrared thermography using deep learning algorithms and highlight of the methodologies proposed include the following: 1. Automatic defect identification and segmentation by deep learning algorithms in infrared thermography. The pre-trained convolutional neural networks (CNNs) are introduced to capture defect feature in infrared thermal images to implement CNNs based models for the detection of structural defects in samples made of composite materials (fault diagnosis). Several alternatives of deep CNNs for the detection of defects in the Infrared thermography. The comparisons of performance of the automatic defect detection and segmentation in infrared thermography using different deep learning detection methods: (i) instance segmentation (Center-mask; Mask-RCNN); (ii) objective location (Yolo-v3; Faster-RCNN); (iii) semantic segmentation (Unet; Res-unet); 2. Data augmentation technique through synthetic data generation to reduce the cost of high expense associated with the collection of original infrared data in the composites (aircraft components.) to enrich training data for feature learning in TNDE; 3. The generative adversarial network (Deep convolutional GAN and Wasserstein GAN) is introduced to the infrared thermography associated with partial least square thermography (PLST) (PLS-GANs network) for visible feature extraction of defects and enhancement of the visibility of defects to remove noise in Pulsed thermography; 4. Automatic defect depth estimation (Characterization issue) from simulated infrared data using a simplified recurrent neural network: Gate Recurrent Unit (GRU) through the regression supervised learning.

Download or read book Nondestructive Evaluation of Materials by Infrared Thermography written by Xavier Maldague and published by London : Springer-Verlag. This book was released on 1993 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultrasonic And Advanced Methods For Nondestructive Testing And Material Characterization written by Chi Hau Chen and published by World Scientific. This book was released on 2007-05-24 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.

Download or read book Advanced Nondestructive Evaluation Ii In 2 Volumes With Cd rom Proceedings Of The International Conference On Ande 2007 Volume 1 written by Seung-seok Lee and published by World Scientific. This book was released on 2008-08-04 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises papers presented at the 2nd International Conference on Advanced Nondestructive Evaluation (ANDE 2007) held in Busan, Korea, on October 17-19, 2007. Many of the excellent papers included in this book show the current state of nondestructive technologies, which are experiencing rapid progress with the integration of emerging technologies in various fields. As such, this volume provides an avenue for both specialists and scholars to share their ideas and the results of their findings in the field of nondestructive evaluation./a

Download or read book Non Destructive Evaluation NDE of Polymer Matrix Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2013-06-30 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas. Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four. With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. Explores a range of NDE and NDT techniques and considers future trends Examines in detail NDE techniques for adhesively bonded applications Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring

Download or read book Infrared Thermography and Thermal Nondestructive Testing written by Vladimir Vavilov and published by Springer Nature. This book was released on 2020-07-10 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book summarizing the theoretical basics of thermal nondestructive testing (TNDT) by combining elements of heat conduction, infrared thermography, and industrial nondestructive testing. The text contains the physical models of TNDT, heat transfer in defective and sound structures, and thermal properties of materials. Also included are the optimization of TNDT procedures, defect characterization, data processing in TNDT, active and passive TNDT systems, as well as elements of statistical data treatment and decision making. This text contains in-depth descriptions of applications in infrared/thermal testing within aerospace, power production, building, as well as the conservation of artistic monuments The book is intended for the industrial specialists who are involved in technical diagnostics and nondestructive testing. It may also be useful for academic researchers, undergraduate, graduate and PhD university students.

Download or read book Infrared Thermography in the Evaluation of Aerospace Composite Materials written by Carosena Meola and published by Woodhead Publishing. This book was released on 2016-06-29 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared Thermography in the Evaluation of Aerospace Composite Materials: Infrared Thermography to Composites provides an update on infrared thermography, a fast and reliable method for non-destructive evaluation of composite materials used in the aerospace field. The book describes composites and the main problems that can arise both during manufacturing and when in service, and then covers different thermographic non-destructive testing and evaluation techniques, including pulse thermography, lock-in thermography, and pulse phase. Each technique includes key examples and relevant references, with sections devoted to the usefulness of an infrared imaging device to monitor the behavior of a material under load, such as impact and bending. The book also includes discussions on standards, personnel certification, and training. Provides a comprehensive look at the use of infrared thermography in the materials science field Describes thermographic techniques of non-destructive testing in an easy way, and with links to aeronautical standards Addresses different types of composite problems and how they can be helped through the use of infrared thermography Includes key examples and relevant references, with sections devoted to the usefulness of an infrared imaging device to monitor the behavior of a material under load

Download or read book Nondestructive Evaluation written by Peter J. Shull and published by CRC Press. This book was released on 2002-05-08 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing NDE issues associated with real-world applications, this comprehensive book details conventional and forthcoming NDE technologies. It instructs on current practices, common techniques and equipment applications, and the potentials and limitations of current NDE methods. Each chapter details a different method, providing an overview, an e

Download or read book Infrared Thermography Recent Advances and Future Trends written by Carosena Meola and published by Bentham Science Publishers. This book was released on 2012-08-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.