Download or read book Studies on Polymer Alloying Using Reactive Extrusion written by Dimitrios Christos Argyropoulos and published by . This book was released on 1997 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.
Download or read book Reactive Extrusion written by Marino Xanthos and published by Hanser Gardner Publications. This book was released on 1992-01-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a highly successful PPI advanced technical course given by the author, this book combines the applied and fundamental aspects of reactive extrusion.
Download or read book Reactive Processing of Polymers written by M.W.R. Brown and published by iSmithers Rapra Publishing. This book was released on 1994 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in machinery, materials and applications are outlined in the cond104 of commercial considerations and advances in fundamental understanding. The principles and benefits of polymer modification and blending via reactive extrusion are explained. A b257 of novel techniques which have developed out of the major reactive processes are also described. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Reactive and Functional Polymers Research Advances written by Matheus I. Barroso and published by Nova Publishers. This book was released on 2008 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents research on inorganic and organic functional polymers, both solid and liquid, acting as reagents, catalysts, carriers of protecting groups, templates, ion-exchangers, selective sorbents, chelating agents, supports for enzymes and cells, and the like. This book also covers reactive crosslinkable prepolymers, and degradable polymers.
Download or read book Starch Based Polymeric Materials and Nanocomposites written by Jasim Ahmed and published by CRC Press. This book was released on 2012-04-04 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, much attention has been focused on biodegradable polymers from renewable resources. Due to its availability and low cost, starch is a promising candidate among biopolymers for use in biodegradable packaging materials and for other purposes. Starch-Based Polymeric Materials and Nanocomposites: Chemistry, Processing, and Applications
Download or read book Blends and Alloys of Engineering Thermoplastics written by H.T.Van De Grampel and published by iSmithers Rapra Publishing. This book was released on 1991-12 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Alloys II written by Daniel Klempner and published by Springer. This book was released on 1980-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "alloy" as pertaining to polymers has become an increasingly popular description of composites of polymers, parti cularly since the publication of the first volume in this series in 1977. Polymer alloy refers to that class of macromolecular materials which, in general, consists of combinations of chemically different polymers. The polymers involved in these combinations may be hetero geneous (multiphase) or homogeneous (single phase). They may be linked together with covalent bonds between the component polymers (block copolymers, graft copolymers), linked topologically with no covalent bonds (interpenetrating polymer networks), or not linked at all except physically (polyblends). In addition, they may be linear (thermoplastic), crosslinked (thermosetting), crystalline, or amorphous, although the latter is more common. To the immense satisfaction - but not surprise - of the editors, there has been no decrease in the research and development of polymer alloys since the publication of the first volume, as evidenced by numerous publications, conferences and symposia. Continued advances in polymer technology caused by the design of new types of polymer alloys have also been noted. This technolog ical interest stems from the fact that these materials very often exhibit a synergism in properties achievable only by the formation of polymer alloys. The classic examples, of course, are the high impact plastics, which are either polyblends, block, or graft co polymers composed of a rubbery and a glassy polymer. Interpene trating polymer networks (IPN's) of such polymers also exhibit the same, or even greater, synergism.
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Multicomponent Polymers written by Guojian Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-10-26 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces fundamental principles, phase structure, mechanism, mechanical properties, and different types of multicomponent polymers. Rheological properties, graft copolymers, block copolymers and interpenetrating polymer networks are discussed in detail as well. With abundant illustrations, it is an essential reference for polymer chemists, material scientists and graduate students.
Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1989-10-10 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study shows the impact resistance of polypropylene toughened by an ethylene-propylene elastomer. The objective was to modify polystyrene with linear thermoplastic elastomer of styrene-isoprene-styrene triblock copolymer and polystyrene with ethylene-propylene rubber by weight by melt blending.
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Reactive Extrusion Systems written by Leon P.B.M. Janssen and published by CRC Press. This book was released on 2004-01-08 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Citing recently realized applications for extruders as polymerization, modification, and degradation reactors and presenting a telling array of new research results and illustrative experimental cases, Reactive Extrusion Systems sheds light on the complex set of interactions underlying reactions in extruders. The book succeeds as a three-part surve
Download or read book Polymer Blends and Alloys written by M.J. Folkes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: P. S. HOPE and M. J. FOLKES Mixing two or more polymers together to produce blends or alloys is a well-established strategy for achieving a specified portfolio of physical proper ties, without the need to synthesise specialised polymer systems. The subject is vast and has been the focus of much work, both theoretical and experimental. Much ofthe earlier work in this field was necessarily empirical and many ofthe blends produced were of academic rather than commercial interest. The manner in which two (or more) polymers are compounded together is of vital importance in controlling the properties of blends. Moreover, particular ly through detailed rheological studies, it is becoming apparent that process ing can provide a wide range of blend microstructures. In an extreme, this is exemplified by the in situ formation of fibres resulting from the imposition of predetermined flow fields on blends, when in the solution or melt state. The microstructures produced in this case transform the blend into a true fibre composite; this parallels earlier work on the deformation of metal alloys. This type of processing-structure-property correlation opens up many new possi bilities for innovative applications; for example, the production of stiff fibre composites and blends having anisotropic transport properties, such as novel membranes. This book serves a dual purpose.
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Handbook of Engineering Polymeric Materials written by P. Cheremisinoff and published by CRC Press. This book was released on 1997-07-25 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting practical information on new and conventional polymers and products as alternative materials and end-use applications, this work details technological advancements in high-structure plastics and elastomers, functionalized materials, and their product applications. The book also provides a comparison of manufacturing and processing techniques from around the world. It emphasizes product characterization, performance attributes and structural properties.
Download or read book Polymer Alloys and Blends written by L. A. Utracki and published by . This book was released on 1987 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
