Download or read book Studies on Perfect Hyperbranched Chains Free in Solution and Confined in a Cylindrical Pore written by Lianwei Li and published by Springer Science & Business Media. This book was released on 2014-04-08 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lianwei Li's Ph.D. thesis solves a long-standing problem in polymer physics: how does a hyperbranched chain pass through a cylindrical pore smaller than its size under an elongational flow field? The question was asked by the Nobel Laureate, the late Professor de Gennes in the 70s but has never been seriously addressed through real experiments. This thesis outlines how Lianwei Li developed a novel polymerization strategy using a seesaw-type macromonomer to prepare a set of "defect-free" hyperbranched chagins with different overall molar masses and controllable uniform subchain lengths. The author then unearthed how the critical (minimum) flow rate at which a hyperbranched chain can pass through the pore, is dependent on the overall molar mass and the subchain length. The experimental results give a unified description of polymer chains with different topologies passing through a small cylindrical pore, which enables us to separate chains by their topologies instead of their sizes in ultrafiltration. In addition, this research also reveals how the chain structure of amphiphilic hyperbranched block and graft copolymers affect their solution properties, including the establishments of several classic scaling laws that relate the chain size and the intrinsic viscosity to the overall molar mass and the subchain length, respectively. This work has led to numerous publications in high-impact peer-reviewed journals.
Download or read book Polymer Solutions written by Iwao Teraoka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Solutions: An Introduction to Physical Properties offers a fresh, inclusive approach to teaching the fundamentals of physical polymer science. Students, instructors, and professionals in polymer chemistry, analytical chemistry, organic chemistry, engineering, materials, and textiles will find Iwao Teraoka’s text at once accessible and highly detailed in its treatment of the properties of polymers in the solution phase. Teraoka’s purpose in writing Polymer Solutions is twofold: to familiarize the advanced undergraduate and beginning graduate student with basic concepts, theories, models, and experimental techniques for polymer solutions; and to provide a reference for researchers working in the area of polymer solutions as well as those in charge of chromatographic characterization of polymers. The author’s incorporation of recent advances in the instrumentation of size-exclusion chromatography, the method by which polymers are analyzed, renders the text particularly topical. Subjects discussed include: Real, ideal, Gaussian, semirigid, and branched polymer chains Polymer solutions and thermodynamics Static light scattering of a polymer solution Dynamic light scattering and diffusion of polymers Dynamics of dilute and semidilute polymer solutions Study questions at the end of each chapter not only provide students with the opportunity to test their understanding, but also introduce topics relevant to polymer solutions not included in the main text. With over 250 geometrical model diagrams, Polymer Solutions is a necessary reference for students and for scientists pursuing a broader understanding of polymers.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.
Download or read book Porous Polymers written by Michael S. Silverstein and published by John Wiley & Sons. This book was released on 2011-04-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the various aspects of the porous polymer field into one volume. It not only presents a fundamental description of the field, but also describes the state of the art for such materials and provides a glimpse into the future. Emphasizing a different aspect of the ongoing research and development in porous polymers, the book is divided into three sections: Synthesis, Characterization, and Applications. The first part of each chapter presents the basic scientific and engineering principles underlying the topic, while the second part presents the state of the art results based on those principles. In this fashion, the book connects and integrates topics from seemingly disparate fields, each of which embodies different aspects inherent in the diverse field of porous polymeric materials.
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book Silicon Containing Dendritic Polymers written by Petar R. Dvornic and published by Springer Science & Business Media. This book was released on 2009-01-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades silicon-containing dendritic polymers have become one of the fastest growing areas of development in polymer science. The eruption of interest in these new polymers stems from their unprecedented molecular architecture, unique resulting properties and the realization that they represent ideal building blocks for chemical nanotechnology. This is the first book to solely focus on silicon-containing dendritic polymers. The contributions of those experts who originally introduced each field or played a major role in its progress are reported. The developments in all major areas of this field are presented from their origins to the present. It is anticipated that this text will become an invaluable guide and vanguard of reference for experienced scientists interested in the fields of polymer and material science, synthetic chemistry, and nanotechnology. It will also serve advanced graduate students either as a source of creative inspiration or as a textbook for appropriate courses.
Download or read book Compendium of Polymer Terminology and Nomenclature written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2009-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC system of polymer nomenclature has aided the generation of unambiguous names that re ect the historical development of chemistry. However, the explosion in the circulation of information and the globalization of human activities mean that it is now necessary to have a common language for use in legal situations, patents, export-import regulations, and environmental health and safety information. Rather than recommending a ‘unique name’ for each structure, rules have been developed for assigning ‘preferred IUPAC names’, while continuing to allow alternatives in order to preserve the diversity and adaptability of nomenclature. Compendium of Polymer Terminology and Nomenclature is the only publication to collect the most important work on this subject into a single volume. It serves as a handy compendium for scientists and removes the need for time consuming literature searches. One of a series issued by the International Union of Pure and Applied Chemistry (IUPAC), it covers the terminology used in many and varied aspects of polymer science as well as the nomenclature of several di erent types of polymer including regular and irregular single-strand organic polymers, copolymers and regular double-strand (ladder and spiro) organic polymers.
Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.
Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.
Download or read book Responsive Polymer Materials written by Sergiy Minko and published by Wiley-Blackwell. This book was released on 2006-01-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book offers practical insights into the latest developments in responsive polymers, i.e., polymers engineered to alter structure and properties in response to environmental inputs. The book features original design, methodological, and application data. Chemists, biochemists, and electronic engineers will find here important new material to understand and characterize molecular and submolecular assemblies that enable the fabrication of switch-driven polymer systems. Beginning from basic research and moving to single-molecular design, the contributors illuminate switching in self-assembled aggregates of polymer chains. These analyses are extended to the switching/changing of macroscopic properties in bulk and thin films. The book demonstrates how the properties of responsive polymers such as morphology, wetting behavior, adhesion, roughness, permeability etc., can be modified to create and improve biomedical devices, chemical sensors, microfluidic devices, drug delivery systems, adhesion systems, and self-regulating colloids. For specialists investigating the potential of molecular and submolecular polymer design, this book is essential.
Download or read book Materials Nanoarchitectonics written by Katsuhiko Ariga and published by Elsevier. This book was released on 2023-12-15 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Nanoarchitectonics: From Integrated Molecular Systems to Advanced Devices provides the latest information on the design and molecular manipulation of self-organized hierarchically structured systems using tailor-made nanoscale materials as structural and functional units. The book is organized into three main sections that focus on molecular design of building blocks and hybrid materials, formation of nanostructures, and applications and devices. Bringing together emerging materials, synthetic aspects, nanostructure strategies, and applications, the book aims to support further progress, by offering different perspectives and a strong interdisciplinary approach to this rapidly growing area of innovation. This is an extremely valuable resource for researchers, advanced students, and scientists in industry, with an interest in nanoarchitectonics, nanostructures, and nanomaterials, or across the areas of nanotechnology, chemistry, surface science, polymer science, electrical engineering, physics, chemical engineering, and materials science. Offers a nanoarchitectonic perspective on emerging fields, such as metal-organic frameworks, porous polymer materials, or biomimetic nanostructures Discusses different approaches to utilizing "soft chemistry" as a source for hierarchically organized materials Offers an interdisciplinary approach to the design and construction of integrated chemical nano systems Discusses novel approaches towards the creation of complex multiscale architectures
Download or read book Polymers in Confined Environments written by Steve Granick and published by Springer. This book was released on 2003-07-01 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-developing field of confined polymers is reviewed in this volume. Special emphasis is given to polymer aspects of this interdisciplinary problem. Taken together, the contributions offer ample evidence of how the field of polymer science continues to evolve with the passage of time. The topics revolve around the tendency of surfaces to impede chain relaxation and to stimulate new sorts of chain organization. These have been implicated in a variety of spectacular phenomena. Here is a listing of authors and affiliations: K. Binder (Johannes Gutenberg-Universität Mainz, Germany); P.-G. de Gennes (College de France, France); E.P. Giannelis, R. Krishnamoorti, and E. Manias (Cornell University and University of Houston, USA); G.S. Grest (Exxon Research and Engineering Co., USA); L. Leger, E. Raphael, and H. Hervet (College de France, France); S.-Q. Wang (Case Western Reserve University, USA).
Download or read book Molecular and Nano Tubes written by Oliver Hayden and published by Springer Science & Business Media. This book was released on 2011-08-04 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular- and Nano-Tubes summarizes recent advancements in the synthesis, fabrication and applications of tubular structures. An interdisciplinary overview of innovative science focused on tubular structures is provided. The reader is offered an overview of the different fields that molecular and nano tubes appear in, in order to learn the fundamental basics as well as the applications of these materials. This book also: Shows how nanotechnology creates novel materials by crossing the barriers between biology and material science, electronics and optics, medicine and more Demonstrates that tubes are a fundamental element in nature and used in disparate applications such as ion channels and carbon nanotubes Molecular- and Nano-Tubes is an ideal volume for researchers and engineers working in materials science and nanotechnology.
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book Engineering Polymer Systems for Improved Drug Delivery written by Rebecca A. Bader and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have played a critical role in the rational design and application of drug delivery systems that increase the efficacy and reduce the toxicity of new and conventional therapeutics. Beginning with an introduction to the fundamentals of drug delivery, Engineering Polymer Systems for Improved Drug Delivery explores traditional drug delivery techniques as well as emerging advanced drug delivery techniques. By reviewing many types of polymeric drug delivery systems, and including key points, worked examples and homework problems, this book will serve as a guide to for specialists and non-specialists as well as a graduate level text for drug delivery courses.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
