Download or read book Studies of Corrosion and Oxidation of Materials Surfaces written by Sajan Thomas and published by . This book was released on 1991 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2016-05-12 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition. The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion. In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion. Emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions Uses phase diagrams and diffusion paths to analyze and interpret scale structures and internal precipitation distributions Presents a detailed examination of corrosion in industrial gases (water vapor effects, carburization and metal dusting, sulphidation) Contains numerous micrographs, phase diagrams, and tabulations of relevant thermodynamic and kinetic data Combines physical chemistry and materials science methodologies Provides two completely new chapters (chapters 11 and 13), and numerous other updates throughout the text
Download or read book Atmospheric Corrosion written by Christofer Leygraf and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATMOSPHERIC CORROSION Presents a comprehensive look at atmospheric corrosion, combining expertise in corrosion science and atmospheric chemistry Atmospheric corrosion has been a subject of engineering study, largely empirical, for nearly a century. Scientists came to the field rather later on and had considerable difficulty bringing their arsenal of tools to bear on the problem. Atmospheric corrosion was traditionally studied by specialists in corrosion having little knowledge of atmospheric chemistry, history, or prospects. Atmospheric Corrosion provides a combined approach bringing together experimental corrosion and atmospheric chemistry. The second edition expands on this approach by including environmental aspects of corrosion, atmospheric corrosion modeling, and international corrosion exposure programs. The combination of specialties provides a more comprehensive coverage of the topic. These scientific insights into the corrosion process and its amelioration are the focus of this book. Key topics include the following: Basic principles of atmospheric corrosion chemistry Corrosion mechanisms in controlled and uncontrolled environments Degradation of materials in architectural, transport, and structural applications; electronic devices; and cultural artifacts Protection of existing materials and choosing new ones that resist corrosion Prediction of how and where atmospheric corrosion may evolve in the future Complete with appendices discussing experimental techniques, computer models, and the degradation of specific metals, Atmospheric Corrosion, Second Edition continues to be an invaluable resource for corrosion scientists, corrosion engineers, conservators, environmental scientists, and anyone interested in the theory and application of this evolving field. The book concerns primarily the atmospheric corrosion of metals and is written at a level suitable for advanced undergraduates or beginning graduate students in any of the physical or engineering sciences.
Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.
Download or read book Surface Modification of Metals and Alloys written by Oriol Rius-Ayra and published by MDPI. This book was released on 2021-08-31 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past four decades, there has been increased attention given to the research of fluid mechanics due to its wide application in industry and phycology. Major advances in the modeling of key topics such Newtonian and non-Newtonian fluids and thin film flows have been made and finally published in the Special Issue of coatings. This is an attempt to edit the Special Issue into a book. Although this book is not a formal textbook, it will definitely be useful for university teachers, research students, industrial researchers and in overcoming the difficulties occurring in the said topic, while dealing with the nonlinear governing equations. For such types of equations, it is often more difficult to find an analytical solution or even a numerical one. This book has successfully handled this challenging job with the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.
Download or read book Aerospace Alloys written by Stefano Gialanella and published by Springer Nature. This book was released on 2019-10-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.
Download or read book Research Information Surveys on Corrosion of Metals written by National Research Council (U.S.). Research Information Service and published by . This book was released on 1923 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Opportunities in Corrosion Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 2011-01-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of corrosion science and engineering is on the threshold of important advances. Advances in lifetime prediction and technological solutions, as enabled by the convergence of experimental and computational length and timescales and powerful new modeling techniques, are allowing the development of rigorous, mechanistically based models from observations and physical laws. Despite considerable progress in the integration of materials by design into engineering development of products, corrosion considerations are typically missing from such constructs. Similarly, condition monitoring and remaining life prediction (prognosis) do not at present incorporate corrosion factors. Great opportunities exist to use the framework of these materials design and engineering tools to stimulate corrosion research and development to achieve quantitative life prediction, to incorporate state-of-the-art sensing approaches into experimentation and materials architectures, and to introduce environmental degradation factors into these capabilities. Research Opportunities in Corrosion Science and Engineering identifies grand challenges for the corrosion research community, highlights research opportunities in corrosion science and engineering, and posits a national strategy for corrosion research. It is a logical and necessary complement to the recently published book, Assessment of Corrosion Education, which emphasized that technical education must be supported by academic, industrial, and government research. Although the present report focuses on the government role, this emphasis does not diminish the role of industry or academia.
Download or read book Materials and Coatings to Resist High Temperature Corrosion written by Derek Roy Holmes and published by . This book was released on 1978 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Science and Technology written by David E.J. Talbot and published by CRC Press. This book was released on 2018-01-29 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years after its first publication, Corrosion Science and Technology continues to be a relevant practical guide for students and professionals interested in material science. This Third Edition thoroughly covers the basic principles of corrosion science in the same reader-friendly manner that made the previous edition invaluable, and enlarges the scope of the content with expanded chapters on processes for various metals and new technologies for limiting costs and metal degradation in a variety of commercial enterprises not explored in previous editions. This book also presents expertly developed methods of corrosion testing and prediction.
Download or read book Corrosion Science written by Gerald S. Frankel and published by The Electrochemical Society. This book was released on 2002 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Characteristics Mechanisms and Control Methods of Candidate Alloys in Sub and Supercritical Water written by Donghai Xu and published by Springer Nature. This book was released on 2021-12-07 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide comprehensive and systematic introduction and summary of corrosion characteristics, mechanisms, and control methods of candidate alloys in sub- and supercritical water environment. First of all, corrosion types of candidate alloys and the effects of major alloying elements on corrosion resistance of potential alloys in sub- and supercritical water are compared and analyzed. At the same time, research status of candidate materials, and development and application trends of several corrosion-resistant alloys are summarized. Then, corrosion characteristics of Ni-Cr, Ni-Cr-Mo, Ni-Fe-Cr and Ni-Fe-Cr-Mo-Cu corrosion-resistant alloys, FeCrAl alloy, and Zircaloy are discussed in detail, including the corrosion rate, the structure and composition of oxide film, and the effects of various surface treatment processes, etc. More specifically, it also investigates corrosion behavior of Ni-based alloy, Fe-Ni-based, and stainless steels in supercritical water. The effects of aggressive species on the corrosion behavior of Ni-base alloys are also explored in supercritical water. Readers will further discover the total corrosion processes and mechanisms of typical candidate alloys in sub- and supercritical water environment. Finally, the work explores the corrosion control methods such as ceramic coatings and passivation processes in supercritical water oxidation and in subcritical water, respectively. Future challenges and development trends of corrosion research of candidate materials in sub- and supercritical water environments are covered at the end of this book. It offers valuable reference for theoretically guiding material selection and design and operating parameter optimization of key equipment in the sub- and supercritical water technologies. The book is written for senior undergraduates, graduate students, scholars, and researchers who are interested in corrosion behavior of candidate materials of supercritical water oxidation system, supercritical water gasification system, and nuclear reactor.
Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2011-08-18 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of the chemical and electrochemical surface reactions
