Download or read book Structures Under Shock and Impact XV written by S. Syngellakis and published by WIT Press. This book was released on 2018-10-23 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the increasing need to protect civilian infrastructure and industrial facilities against unintentional loads arising from accidental impact and explosion events as well as terrorist attack, this book contains papers presented at the 15th International Conference on Structures under Shock and Impact. This successful conference series has been regularly held since it began in 1989 in Cambridge, Massachusetts. While advances have been made over this period many challenges remain, such as to develop more effective and efficient blast and impact mitigation approaches than currently exist. The primary focus remains the survivability of physical facilities and the protection of people, as well as reducing economic losses and impact on the environment, with emphasis on innovative protective technologies to support the needs of an economically growing, modern society. The application of this technology ranges from the safe transportation of people in several modes and the transportation of dangerous or combustible materials to defences against natural hazard threats such as flood, wind, storm, tsunami and earthquake. Large scale testing is prohibitive and small scale laboratory testing results in scaling uncertainties. Continuing research is therefore essential to improve knowledge on how these structures behave under a variety of load actions, some of which interact making it even more complex and difficult to define. Consequently, more use of advanced numerical simulations for load and structural response calculations is common practice in industry and research. Such calculations can directly be used in design and risk assessment calculations, but also be applied as input to more simplified design tools and design codes. Whether numerical or analytical modelling techniques are employed, experimental validation is vital for there to be acceptance of the approach to be used. The published research aims for the exchange of ideas and results to promote a better understanding of the critical issues relating to the testing behaviour, modelling and analyses of protective structures against blast and impact loading.
Download or read book Structures Under Shock and Impact XII written by G. Schleyer and published by WIT Press. This book was released on 2013 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of interest to engineers from civil, military, nuclear, offshore, aeronautical, transportation and other backgrounds, this book contains the proceedings of a well-established conference on the subject that was first held in 1989. Topics covered include: Impact and Blast Loading Characteristics; Protection of Structures from Blast Loads; Energy Absorbing Issues; Structural Crashworthiness; Hazard Mitigation and Assessment; Behaviour of Steel Structures; Behaviour of Structural Concrete; Material Response to High Rate Loading; Seismic Engineering Applications; Interaction Between Computational and Experimental Results; Innovative Materials and Material Systems; Fluid Structure Interaction.The shock and impact behaviour of structures presents challenges to researchers not only because it has obvious time-dependent aspects, but also because it is difficult to specify the external dynamic loading characteristics and to obtain the full dynamic properties of materials. It is crucial that we find ways to share the contributions and understanding that are developing from various theoretical, numerical and experimental studies, as well as investigations into material properties under dynamic loading conditions. This book helps to meet that need.
Download or read book Structures Under Shock and Impact XI written by Norman Jones and published by WIT Press. This book was released on 2010 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the interaction between blast pressure and surface or underground structures, whether the blast is from civilian, military, dust and natural explosions, or any other source.
Download or read book Structures Under Shock and Impact XVI written by S. Syngellakis and published by WIT Press. This book was released on 2020-08-19 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing need to protect civilian infrastructure and industrial facilities against unintentional loads arising from accidental impact and explosion events as well as terrorist attacks is of major importance. While advances have been made in recent years, many challenges remain, such as to develop more effective and efficient blast and impact mitigation approaches than those that currently exist. The primary focus remains the survivability of physical facilities and the protection of people, as well as reducing economic losses and impact on the environment, with emphasis on innovative protective technologies to support the needs of an economically growing, modern society. The application of this technology ranges from the safe transportation of people and dangerous materials to defences against natural hazards such as floods, wind, storms, tsunamis and earthquakes. Large scale testing is prohibitive and small scale laboratory testing results in scaling uncertainties. Continuing research is therefore essential to improve knowledge on how these structures behave under a variety of load actions, some of which interact making it even more complex and difficult to define. Consequently, more use of advanced numerical simulations for load and structural response calculations is common practice in industry and research. Such calculations can directly be used in design and risk assessment calculations, but also be applied to more simplified design tools and design codes. Whether numerical or analytical modelling techniques are employed, experimental validation is vital for there to be acceptance of the approach to be used. The included papers, presented at the 16th International Conference on Structures under Shock and Impact, highlight new research ideas and results to promote a better understanding of the critical issues relating to the testing behaviour, modelling and analyses of protective structures against blast and impact loading.
Download or read book Structures Under Shock and Impact X written by Norman Jones and published by WIT Press. This book was released on 2008 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the interaction between blast pressure and surface or underground structures, whether the blast is from civilian, military, dust and natural explosions, or any other source.
Download or read book Structures Under Shock and Impact XIII written by G. Schleyer and published by WIT Press. This book was released on 2014-06-03 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: SUSI XIII contains the proceedings of the 13th International Conference in the successful series of Structures Under Shock and Impact. Since the first meeting in Cambridge, Massachusetts (1989) the conference has brought together the research works of scientists and engineers from a wide range of academic disciplines and industrial backgrounds that have an interest in the structural impact response of structures and materials. The shock and impact behaviour of structures is a challenging area, not only because of the obvious time-dependent aspects, but also due to the difficulties in specifying the external dynamic loadings, boundary conditions and connection characteristics for structural design and hazard assessment, and in obtaining the dynamic properties of materials. Thus, it is important to recognise and utilise fully the contributions and understand the emerging theoretical, numerical and experimental studies on structures, as well as investigations into the material properties under dynamic loading conditions. Any increased knowledge will enhance our understanding of these problems and thorough forensic studies on the structural damage after accidents will lead to improved design requirements. The range of topics in this very active field is ever expanding. The following list of topics gives an idea of the wide number of applications covered: Impact and blast loading; Energy absorbing issues; Interaction between computational; and experimental results; Aeronautical and aerospace applications; Response of reinforce concrete under impact; Response of building facades to blast; Seismic behaviour; Structural crashworthiness; Industrial accidents and explosions; Hazard mitigation and assessment; Active protection and security; Tunnel and underground; structures protection; Dynamic analysis of composite structures; Design against failure; Damage limitation.
Download or read book Structures Under Shock and Impact IX written by Norman Jones and published by Wit Transactions on the Built. This book was released on 2006 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the interaction between blast pressure and surface or underground structures, whether the blast is from civilian, military, dust and natural explosions, or any other source.
Download or read book Major Accomplishments in Composite Materials and Sandwich Structures written by I. M. Daniel and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects major research contributions in composite materials and sandwich structures supported by the U.S. Office of Naval Research. It contains over thirty chapters written by experts and serves as a reference and guide for future research.
Download or read book Structures Under Shock and Impact VI written by Norman Jones and published by Computational Mechanics. This book was released on 2000 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Reflecting the broad range of interest in this extremely active field, this book contains contributions originally presented at the sixth international conference on this subject.
Download or read book Dynamics in the Practice of Structural Design written by Oscar Sircovich-Saar and published by WIT Press. This book was released on 2006 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practitioner-friendly approach to dynamics on structural design, oriented to facilitate understanding of complicated issues without their elaborate mathematical formulations.While the chapters follow logically from one another, each one deals independently with a subject in structural dynamics; this approach allows the engineer to go directly to the topic of his or her interest at a given moment.Throughout each chapter the reader will find the text set in two different forms, for different levels of the topic in consideration, which will enable him to postpone for a second reading deeper explanations.Conceived as practical support for engineers whenever they want to review a subject related to dynamics in the practice of structural design, this book can be of great help for students of engineering.
Download or read book Structures Under Shock and Impact VII written by Norman Jones and published by Computational Mechanics. This book was released on 2002 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The shock and impact behaviour of structures is an extremely challenging area. It is therefore important to recognize and utilize the contributions emerging from theoretical, numerical and experimental studies on structures, as well as investigations into material properties under dynamic loading conditions.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures Under Shock and Impact V written by Norman Jones and published by Computational Mechanics. This book was released on 1998 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the structural response to explosive shocks on high and low velocity impacts. Topics covered include blast loading of structures, penetration mechanics, collision mechanics, and high speed streaming of material.
Download or read book Structures Under Shock and Impact VIII written by Norman Jones and published by Witpress. This book was released on 2004 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the broad range of research work currently being carried out in academia and industry, this book contains the proceedings of the Eighth International Conference on Structures Under Shock and Impact.
Download or read book Ultimate Limit State Design of Steel Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plated structures are important in a variety of marine and land-based applications, including ships, offshore platforms, power and chemical plants, box girder bridges and box girder cranes. The basic strength members in steel plated structures include support members (such as stiffeners and plate girders), plates, stiffened panels/grillages and box girders. During their lifetime, the structures constructed using these members are subjected to various types of loading which is for the most part operational, but may in some cases be extreme or even accidental. Ultimate Limit State Design of Steel Plated Structures reviews and describes both fundamentals and practical design procedures in this field. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Particularly valuable coverage in the book includes: * Serviceability and the ultimate limit state design of steel structural systems and their components * The progressive collapse and the design of damage tolerant structures in the context of marine accidents * Age related structural degradation such as corrosion and fatigue cracks Furthermore, this book is also an easily accessed design tool which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs which can be downloaded. In addition, expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached, is provided. Designed as both a textbook and a handy reference, the book is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. The book also meets the needs of structural designers or researchers who are involved in civil, marine and mechanical engineering as well as offshore engineering and naval architecture.
Download or read book World Scientific Handbook Of Experimental Results On High Speed Penetration Into Metals Concrete And Soils written by Gabi Ben-dor and published by World Scientific. This book was released on 2016-08-18 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium contains a vast systematized data of 14,000 experiments on high-velocity penetration into metals, concrete, reinforced concrete, and geological media which were published in the open literature (journal papers, reports, conference proceedings) during the last 70 years. Data presented in this edition are related to the initial and final stages of penetration and include: parameters which characterize mechanical and geometric properties of the striker and the shield; striking and residual velocities of projectile or depth of penetration; changes of mass and size of projectile; angles that determine the initial and residual position of the projectile; ballistic limit velocity; basic characteristics of plug and deformation of the shield.Unified form of data representation and common notations are used throughout the book. All information is presented in numerical form in SI units. The book also contains indices which allow a fast search of the authors' publications and related experiments. Theoreticians, design engineers and experimentalists will find this handbook a valuable reference material.
Download or read book Experimental Techniques and Design in Composite Materials written by M.S. Found and published by Routledge. This book was released on 2017-11-22 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the revised versions of papers presented at the 4th Seminar on Experimental Techniques and Design in Composite Materials. The papers have been divided into five sections: fatigue, test methods, design, impact and modelling.
