Download or read book Structures for Enhanced Safety and Physical Security written by Theodor Krauthammer and published by . This book was released on 1989 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 36 papers presented at a specialty conference on enhanced safety and physical security of structures, held in Arlington, Virginia, March 8-10, 1989.
Download or read book Structural Design for Physical Security written by Task Committee on Structural Design for Physical Security and published by ASCE Publications. This book was released on 1999-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Download or read book Encyclopedia of Security Management written by John J. Fay and published by Butterworth-Heinemann. This book was released on 1993 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: With coverage of the A to Z topics concerning security managers, this volume describes the basics of each topic and the information needed to apply this knowledge to any reader's job, business, or industry. In addition, the book's sample policies, procedures, guides, forms, checklists and drawings can be easily converted for a security manager's use.
Download or read book Effective Physical Security written by Lawrence J. Fennelly and published by Butterworth-Heinemann. This book was released on 2016-11-25 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective Physical Security, Fifth Edition is a best-practices compendium that details the essential elements and latest developments in physical security protection. This new edition is completely updated, with new chapters carefully selected from the author's work that set the standard. This book contains important coverage of environmental design, security surveys, locks, lighting, and CCTV, the latest ISO standards for risk assessment and risk management, physical security planning, network systems infrastructure, and environmental design. - Provides detailed coverage of physical security in an easily accessible format - Presents information that should be required reading for ASIS International's Physical Security Professional (PSP) certification - Incorporates expert contributors in the field of physical security, while maintaining a consistent flow and style - Serves the needs of multiple audiences, as both a textbook and professional desk reference - Blends theory and practice, with a specific focus on today's global business and societal environment, and the associated security, safety, and asset protection challenges - Includes useful information on the various and many aids appearing in the book - Features terminology, references, websites, appendices to chapters, and checklists
Download or read book Modern Protective Structures written by Theodor Krauthammer and published by CRC Press. This book was released on 2008-02-01 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, reasonably predictable military operations have been replaced by low intensity conflicts-less predictable terrorist activities carried out by determined individuals or small groups that possess a wide range of backgrounds and capabilities. Because of the threats posed by this evolving type of warfare, civil engineers and emergency
Download or read book Safeguarding Your Technology written by Tom Szuba and published by . This book was released on 1998 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Security and Safety written by Truett A. Ricks and published by CRC Press. This book was released on 2017-06-29 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: How-To Guide Written By Practicing Professionals Physical Security and Safety: A Field Guide for the Practitioner introduces the basic principles of safety in the workplace, and effectively addresses the needs of the responsible security practitioner. This book provides essential knowledge on the procedures and processes needed for loss reduction, protection of organizational assets, and security and safety management. Presents Vital Information on Recognizing and Understanding Security Needs The book is divided into two parts. The first half of the text, Security and Safety Planning, explores the theory and concepts of security and covers: threat decomposition, identifying security threats and vulnerabilities, protection, and risk assessment. The second half, Infrastructure Protection, examines the overall physical protection program and covers: access and perimeter control, alarm systems, response force models, and practical considerations for protecting information technology (IT). Addresses general safety concerns and specific issues covered by Occupational Safety and Health Administration (OSHA) and fire protection regulations Discusses security policies and procedures required for implementing a system and developing an attitude of effective physical security Acts as a handbook for security applications and as a reference of security considerations Physical Security and Safety: A Field Guide for the Practitioner offers relevant discourse on physical security in the workplace, and provides a guide for security, risk management, and safety professionals.
Download or read book Building Security written by Mark L. Goldstein and published by DIANE Publishing. This book was released on 2011-04 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fed. government's reliance on leased space underscores the need to physically secure this space and help safeguard employees, visitors, and gov¿t. assets. In April 2010 the Interagency Security Comm., comprised of 47 fed. agencies and departments, issued Physical Security Criteria for Fed. Facilities (the 2010 standards) which supersede previous ISC standards. This report: (1) identifies challenges that exist in protecting leased space; and (2) examines how the 2010 standards address these challenges. To conduct this work, the auditor interviewed fed. officials, four fed. departments selected as case studies based on their large square footage of leased space, and the Fed. Protective Service. Illustrations. This is a print on demand report.
Download or read book Physical Security 150 Things You Should Know written by Lawrence J. Fennelly and published by Butterworth-Heinemann. This book was released on 2016-10-27 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Security: 150 Things You Should Know, Second Edition is a useful reference for those at any stage of their security career. This practical guide covers the latest technological trends for managing the physical security needs of buildings and campuses of all sizes. Through anecdotes, case studies, and documented procedures, the authors have amassed the most complete collection of information on physical security available. Security practitioners of all levels will find this book easy to use as they look for practical tips to understand and manage the latest physical security technologies, such as biometrics, IP video, video analytics, and mass notification, as well as the latest principles in access control, command and control, perimeter protection, and visitor management. - Offers a comprehensive overview of the latest trends in physical security, surveillance, and access control technologies - Provides practical tips on a wide variety of physical security topics - Features new technologies, such as biometrics, high definition cameras, and IP video - Blends theory and practice with a specific focus on today's global business environment and the various security, safety, and asset protection challenges associated with it
Download or read book Design Guidelines for Physical Security of Facilities written by Department of Department of Defense and published by . This book was released on 1993-12-15 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIL-HDBK-1013/1A - 15 December 1993 ePub version also available for use on Kindle, iPad, Android tablet, and iPhone. If you like this book (or the Kindle version), please leave positive review. This manual provides guidance to ensure that appropriate physical security considerations are included in the design of facilities. The pre-design phase, including physical security threats, are discussed initially, followed by an overview of the design phase. Specific technical sections include exterior site physical security, building physical security, ballistic attack hardening, standoff weapon hardening, and bomb blast hardening. This military handbook has been developed from an evaluation of facilities in the shore establishment, from surveys of the availability of new materials and construction methods, and from selection of the best design practices of the Naval Facilities Engineering Command, other DOD services and Government agencies, and the private sector. Why buy a book you can download for free? First you gotta find it and make sure it's the latest version (not always easy). Then you gotta print it using a network printer you share with 100 other people - and its outta paper - and the toner is low (take out the toner cartridge, shake it, then put it back). If it's just 10 pages, no problem, but if it's a 250-page book, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. An engineer that's paid $75 an hour has to do this himself (who has assistant's anymore?). If you are paid more than $10 an hour and use an ink jet printer, buying this book will save you money. It's much more cost-effective to just order the latest version from Amazon.com This book is published by 4th Watch Books and includes copyright material. We publish compact, tightly-bound, full-size books (8 � by 11 inches), with glossy covers. 4th Watch Books is a Service Disabled Veteran-Owned Small Business (SDVOSB). For more titles published by 4th Watch Books, please visit: cybah.webplus.net UFC 2-100-01 Installation Master Planning UFC 3-120-01 Design: Sign Standards UFC 3-101-01 Architecture UFC 3-440-01 Facility-Scale Renewable Energy Systems UFC 3-201-02 Landscape Architecture UFC 3-501-01 Electrical Engineering UFC 3-540-08 Utility-Scale Renewable Energy Systems UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-550-07 Operation and Maintenance (O&M) Exterior Power Distribution Systems UFC 3-560-01 Electrical Safety, O & M UFC 3-520-01 Interior Electrical Systems UFC 4-010-06 Cybersecurity of Facility-Related Control Systems UFC 4-021-02 Electronic Security Systems by Department of Defense FC 4-141-05N Navy and Marine Corps Industrial Control Systems Monitoring Stations UFC 4-010-01 DoD Minimum Antiterrorism Standards for Buildings UFC 4-020-01 DoD Security Engineering Facilities Planning Manual UFC 3-430-08N Central Heating Plant UFC 3-410-01 Heating, Ventilating, and Air Conditioning Systems UFC 3-810-01N Navy and Marine Corps Environmental Engineering for Facility Construction UFC 3-730-01 Programming Cost Estimates for Military Construction UFC 1-200-02 High-Performance and Sustainable Building Requirements UFC 3-301-01 Structural Engineering UFC 3-430-02FA Central Steam Boiler Plants UFC 3-430-11 Boiler Control Systems
Download or read book Enhancing Building Performance written by Shauna Mallory-Hill and published by John Wiley & Sons. This book was released on 2012-03-05 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Performance Evaluation (BPE) informs and enhances the usability and sustainability of building designs with lessons learned from evaluation of building performance throughout the building life cycle, from initial planning through occupancy to adaptive re-use. A key feature of BPE is that it examines design and technical performance of buildings alongside human performance criteria. That is, it seeks to examine facilities in order to determine whether they will work for the people that will use and occupy them. Rigorous BPE helps to improve design practice by providing feedback on the effectiveness of the choices made about the building to ensure that its design is optimised for stakeholders’ uses. The overarching theme for Enhancing Building Performance is to present the next generation of BPE work. The book provides an updated systematic approach for BPE as well as chapters written by experts from around the world who demonstrate how to apply BPE to enhance building design. Topics covered include: evidence-based and integrative design processes, evaluation methods and tools, and education and knowledge transfer. In addition, case studies provide specific examples of how BPE has been used to study such things as the impact of workplace design on human productivity and innovation. Written primarily for design professionals and facility managers who wish to use BPE to deliver improved building performance that is responsive to the needs of stakeholders, Enhancing Building Performance will also be of great value to researchers and students across a range of architecture and construction disciplines.
Download or read book Infrastructure Systems for Nuclear Energy written by Thomas T. C. Hsu and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing sufficient energy resources to replace coal, oil and gas is a globally critical necessity. Alternatives to fossil fuels such as wind, solar, or geothermal energies are desirable, but the usable quantities are limited and each has inherent deterrents. The only virtually unlimited energy source is nuclear energy, where safety of infrastructure systems is the paramount concern. Infrastructure Systems for Nuclear Energy addresses the analysis and design of infrastructures associated with nuclear energy. It provides an overview of the current and future nuclear power industry and the infrastructure systems from the perspectives of regulators, operators, practicing engineers and research academics. This book also provides details on investigations of containment structures, nuclear waste storage facilities and the applications of commercial/academic computer software. Specific environments that challenge the behavior of nuclear power plants infrastructure systems such as earthquake, blast, high temperature, irradiation effects, soil-structure interaction effect, etc., are also discussed. Key features: Includes contributions from global experts representing academia and industry Provides an overview of the nuclear power industry and nuclear infrastructure systems Presents the state-of-the-art as well as the future direction for nuclear civil infrastructure systems Infrastructure Systems for Nuclear Energy is a comprehensive, up-to-date reference for researchers and practitioners working in this field and for graduate studies in civil and mechanical engineering.
Download or read book Transactions of the American Society of Civil Engineers written by American Society of Civil Engineers and published by . This book was released on 1990 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 29-30 contain papers of the International Engineering Congress, Chicago, 1893; v. 54, pts. A-F, papers of the International Engineering Congress, St. Louis, 1904.
Download or read book Safety and Security in Building Design written by Ralph Sinnott and published by Van Nostrand Reinhold Company. This book was released on 1985 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Security Planning and Design written by American Institute of Architects and published by John Wiley & Sons Incorporated. This book was released on 2007-09-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important reference from the American Institute of Architects provides architects and other design professionals with the guidance they need to plan for security in both new and existing facilities Security is one of the many design considerations that architects must address and in the wake of the September 11th 2001 events, it has gained a great deal of attention This book emphasises basic concepts and provides the architect with enough information to conduct an assessment of client needs as well as work with consultants who specialise in implementing security measures. Included are chapters on defining security needs, understanding threats, blast mitigation, building systems, facility operations and biochemical protection. * Important reference on a design consideration that is growing in importance * Provides architects with the fundamental knowledge they need to work with clients and with security consultants * Includes guidelines for conducting client security assessments * Best practices section shows how security can be integrated into design solutions * Contributors to the book represent an impressive body of knowledge and specialise in areas such as crime prevention, blast mitigation, and biological protection
Download or read book Library Security written by Steve Albrecht and published by American Library Association. This book was released on 2015-05-27 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Library work is really all about people. And the inclusive, welcoming nature of the library means that all kinds of people pass through its doors. Not all difficult patrons are dangerous, but some frighten staff and other library users, which can lead to situations that are distracting, troubling, and fraught with liability. For more than a decade, Albrecht, a 15-year police veteran, has presented workshops for libraries on dealing with challenging patrons. His no-nonsense advice will empower library staff in their personal security and give them the tools to confidently communicate with their colleagues, patrons, and members of law enforcement regarding inappropriate behavior. In this book he addresses security issues important to all libraries, including Specific guidance for common situations, such as unruly teens, unwanted sexual advances, chronically homeless substance abusers, and moreThe elements of an effective Code of Conduct and how to enforce itTips on how to manage internet usage to minimize potential problemsHow to align with patrons and use language that defuses the conflictForming partnerships with service organizations, homeless shelters, mental health advocacy groups, and other community resourcesHow to know when it’s time to call the police, plus ideas for increasing law enforcement supportWays to make the library more secure through changes to facilitiesThrough the methods outlined in this book, Albrecht demonstrates that effective communication not only makes library users feel more comfortable but also increases staff morale, ensuring the library is place where everyone feels welcome.
Download or read book Performance based Design for Arson Threats written by Robert A. Neale and published by . This book was released on 2013 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although perhaps not so dramatic or newsworthy as chemical, biological, radiologic, nuclear, or explosive attacks, intentionally set fires are identified security threats to federal buildings accessible to the public. The Department of Homeland Security Interagency Security Committee in 2010 adopted building construction standards that purport to give facility safety committees and building designers guidance on developing permanent countermeasures to 31 diverse threat scenarios described in the Design-Basis Threat (U). To assess the effectiveness of the permanent countermeasures options provided in the Physical Security Criteria for Federal Facilities, a performance-based approach to evaluating the design and construction features is recommended. Clearly articulated performance objectives and quantifiable characterization of the hazardous elements comprising the threat scenarios are essential to evaluating outcomes using a performance-based design approach. A mixed methods research approach is used to analyze the Physical Security Criteria for Federal Facilities standard to make policy recommendations that may enhance occupant safety and federal property protection from arson attacks. Computerized fire effects modeling is used to compare outcomes in non-military and non-postal federal facilities from a variety of simulated arson scenarios using commonly available accelerants.
