Download or read book Structure and Properties of Dislocations in Semiconductors 1989 Proceedings of the 6th INT Symposium Oxford April 1989 written by S. G. Roberts and published by CRC Press. This book was released on 1989 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth International Symposium on the Structure and Properties of Dislocations in Semiconductors was held at the University of Oxford from April 5 to 8, 1989, with participants from ten countries. This volume comprises the oral and poster presentations at the symposium, with contributions from workers who are recognised international experts in the field. There are papers on all aspects of dislocations in semiconductors, ranging from fundamental structural, electronic, optical and mechanical properties to their effects on devices. The field as a whole is an area of active research, providing an underlying knowledge and understanding for device development. There have been considerable advances in recent years, and these proceedings focus on new areas of development for the future. In a field of such importance to the understanding of the behaviour of semiconductor devices, this book is a timely summary of current research and future prospects.
Download or read book Microscopy of Semiconducting Materials 1989 Proceedings of the Royal Microscopical Society Conference Held at Oxford University 10 13 April 1989 written by A. G. Cullis and published by CRC Press. This book was released on 1989 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopy of Semiconducting Materials 1989 brings together both the invited and contributed papers from this conference. The main subject areas covered include: high resolution microscopy, microanalysis, epitaxial layers, quantum wells and superlattices, bulk GaAs, X-ray studies, dielectric structures, silicides and metal-semiconductor contacts, device studies and advanced scanning microscopy techniques. This volume provides an indispensable guide for researchers in physics, materials science, electronics and electrical engineering.
Download or read book Subject Guide to Books in Print written by and published by . This book was released on 1993 with total page 2118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defect Control in Semiconductors written by Kōji Sumino and published by . This book was released on 1990 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect control in semiconductors is a key technology for realizing the ultimate possibilities of modern electronics. The basis of such control lies in an integrated knowledge of a variety of defect properties. From this viewpoint, the volume discusses defect-related problems in connection with defect control in semiconducting materials, such as silicon, III-V, II-VI compounds, organic semiconductors, heterostructure, etc. The conference brought together scientists in the field of fundamental research and engineers involved in application related to electronic devices in order to promote future research activity in both fields and establish a fundamental knowledge of defect control. The main emphasis of the 254 papers presented in this volume is on the control of the concentration, distribution, structural and electronic states of any types of defects including impurities as well as control of the electrical, optical and other activities of defects. Due to the extensive length of the contents, only the number of papers presented per session is listed below.
Download or read book Science and Technology of Defects in Silicon written by C.A.J. Ammerlaan and published by Elsevier. This book was released on 2014-01-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews recent developments in the materials science of silicon. The topics discussed range from the fundamental characterization of the physical properties to the assessment of materials for device applications, and include: crystal growth; process-induced defects; topography; hydrogenation of silicon; impurities; and complexes and interactions between impurities.In view of its key position within the conference scope, several papers examine process induced defects: defects due to ion implantation, silicidation and dry etching, with emphasis being placed on the device aspects. Special attention is also paid to recent developments in characterization techniques on epitaxially grown silicon, and silicon-on-insulators.
Download or read book Government reports annual index written by and published by . This book was released on 199? with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1990-04 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ESN Information Bulletin written by and published by . This book was released on 1988 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ISPSD 94 written by Wolfgang Fichtner and published by . This book was released on 1994 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Aspects of Dislocation Theory written by John Arthur Simmons and published by . This book was released on 1970 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Dislocations written by John Price Hirth and published by . This book was released on 1992 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a comprehensive treatment of the fundamentals of dislocations. This book covers the elastic theory of straight and curved dislocations, and includes a chapter on elastic anisotropy. It also presents applications to the theory of dislocation motion at low and high temperatures.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.
Download or read book Crystallography of Quasicrystals written by Steurer Walter and published by Springer Science & Business Media. This book was released on 2009-08-26 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: From tilings to quasicrystal structures and from surfaces to the n-dimensional approach, this book gives a full, self-contained in-depth description of the crystallography of quasicrystals. It aims not only at conveying the concepts and a precise picture of the structures of quasicrystals, but it also enables the interested reader to enter the field of quasicrystal structure analysis. Going beyond metallic quasicrystals, it also describes the new, dynamically growing field of photonic quasicrystals. The readership will be graduate students and researchers in crystallography, solid-state physics, materials science, solid- state chemistry and applied mathematics.
Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.
