Download or read book Structural Monitoring with Fiber Optic Technology written by Raymond M. Measures and published by Elsevier. This book was released on 2001-04-10 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to address the field of structurally integrated fiber optic sensors. Fiber optic sensors embedded within materials and systems are able to measure a variety of parameters (i.e. temperature, vibration, deformation, strain, etc.) that allows for real time non-destructive evaluation. Examples include the following: monitoring structural fatigue in aging aircraft or loads in bridge structures. In more advanced applications, fiber optic sensors control actuators that allow materials to adapt to their environment. This gives rise to the names, "smart," "intelligent," and/or "adaptive" materials or structures.Structural Monitoring with Fiber Optic Technology is the firs single author book on the new field of fiber optic structural sensing. As such it provides: coverage of the fundamentals of the technology, a coherent and systematic discussion on the most important aspects of the subject, a broad view of the subject, while retaining a degree of focus on those advances most significant in terms of their future potential, particularly in regard to broad implementation of the technology. The book provides an introduction to the relevant value to structural monitoring. It also highlights the advantages of fiber optic based sensors over conventional electrical measurement technology.The book richly illustrates the subject matter with 615 figures and provides many examples of fiber optic structural sensing, including a detailed overview of a number of major field site applications. Most of these large scale applications are drawn from the civil engineering community as they have been the first to strongly embrace fiber optic structural monitoring. This is especially true for bridges, where innovative new designs and the use of fiber reinforced polymer composite materials to replace steel represents a major advance that is expected to revolutionize the construction industry. Examples include new bridges, which are serving as testbeds for these new materials and are instrumented with arrays of fiber optic structural sensors. In one case, this state-of-the-art monitoring system permits engineers at a distant site to track the response of the bridge to traffic loads and keep an eye on the long term performance of the new materials. Fiber optic structural sensing technology is equally applicable to other industrial sectors, such as the aerospace and marine industries. Indeed, several examples of ships being instrumented with arrays of fiber optic sensors are also included. * The author directed one of the leading laboratories in the development of this technology and its application to civil engineering* Provides a strong, concise foundation in the basics of the technology* Includes many examples of the application of the technology, including many major field site case studies* Richly illustrated with 615 figures, many redrawn to make them easier to understand; also includes over 600 references* Written in a style designed to help the reader unfamiliar with fiber optic technology appreciate what can be accomplished with this new form of structural monitoring

Download or read book Fibre Optic Methods for Structural Health Monitoring written by Branko Glisic and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibre optic sensors in structural health monitoring has rapidly accelerated in recent years. By embedding fibre optic sensors in structures (e.g. buildings, bridges and pipelines) it is possible to obtain real time data on structural changes such as stress or strain. Engineers use monitoring data to detect deviations from a structure’s original design performance in order to optimise the operation, repair and maintenance of a structure over time. Fibre Optic Methods for Structural Health Monitoring is organised as a step-by-step guide to implementing a monitoring system and includes examples of common structures and their most-frequently monitored parameters. This book: presents a universal method for static structural health monitoring, using a technique with proven effectiveness in hundreds of applications worldwide; discusses a variety of different structures including buildings, bridges, dams, tunnels and pipelines; features case studies which describe common problems and offer solutions to those problems; provides advice on establishing mechanical parameters to monitor (including deformations, rotations and displacements) and on placing sensors to achieve monitoring objectives; identifies methods for interpreting data according to construction material and shows how to apply numerical concepts and formulae to data in order to inform decision making. Fibre Optic Methods for Structural Health Monitoring is an invaluable reference for practising engineers in the fields of civil, structural and geotechnical engineering. It will also be of interest to academics and undergraduate/graduate students studying civil and structural engineering.

Download or read book Structural Health Monitoring of Composite Structures Using Fiber Optic Methods written by Ginu Rajan and published by CRC Press. This book was released on 2016-10-03 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly comprehensive, introductory book explains the basics of structural health monitoring aspects of composite structures. This book serve as an all-in-one reference book in which the reader can receive a basic understanding of composite materials, manufacturing methods, the latest types of optical fiber sensors used for structural health monitoring of composite structures, and demonstrated applications of the use of fiber sensors in a variety of composite material structures. The content draws upon the authors’ and distinguished contributors’ extensive research/teaching and industrial experience to fully cover the structural health monitoring of composite materials using fiber optic sensing methods.

Download or read book Structural Health Monitoring of Civil Infrastructure Systems written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2009-08-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring is an extremely important methodology in evaluating the ‘health’ of a structure by assessing the level of deterioration and remaining service life of civil infrastructure systems. This book reviews key developments in research, technologies and applications in this area of civil engineering. It discusses ways of obtaining and analysing data, sensor technologies and methods of sensing changes in structural performance characteristics. It also discusses data transmission and the application of both individual technologies and entire systems to bridges and buildings. With its distinguished editors and international team of contributors, Structural health monitoring of civil infrastructure systems is a valuable reference for students in civil and structural engineering programs as well as those studying sensors, data analysis and transmission at universities. It will also be an important source for practicing civil engineers and designers, engineers and researchers developing sensors, network systems and methods of data transmission and analysis, policy makers, inspectors and those responsible for the safety and service life of civil infrastructure. Reviews key developments in research, technologies and applications Discusses systems used to obtain and analyse data and sensor technologies Assesses methods of sensing changes in structural performance

Download or read book Fiber Optic Sensors for Structural and Geotechnical Monitoring written by Michele Arturo Caponero and published by MDPI. This book was released on 2020-12-02 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of sensors based on fibre optic technology allows a broad range of applications in the fields of structural and geotechnical monitoring, which can effectively improve the maintenance of infrastructures and the safety of communities. Thanks to its valuable features, such as distributed monitoring, the easiness and endurance of cabling, long term stability, reliable responses in both static and dynamic regimes and fibre optic technology, innovative and efficient solutions to quite difficult monitoring problems have already been provided. The increasing worldwide attention to infrastructures and communities with resilience capabilities against natural disasters has opened up new and challenging perspectives of applications to the use of fibre optic technology for structural and geotechnical monitoring. This book collects contributions in the development and application of monitoring solutions, based on fibre optic technology for structural and geotechnical engineering works and issues. In the book preface, the content of the contributions is reviewed, pointing out the relevance of the work, with respect to the advance and spreading of fibre optic technology for monitoring applications. All contributions provide a comprehensive discussion and report a rich bibliography on the current trends and issues relative to the theme of the work presented.

Download or read book Structural Health Monitoring of Aerospace Composites written by Victor Giurgiutiu and published by Academic Press. This book was released on 2015-09-08 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring of Aerospace Composite Structures offers a comprehensive review of established and promising technologies under development in the emerging area of structural health monitoring (SHM) of aerospace composite structures. Beginning with a description of the different types of composite damage, which differ fundamentally from the damage states encountered in metallic airframes, the book moves on to describe the SHM methods and sensors currently under consideration before considering application examples related to specific composites, SHM sensors, and detection methods. Expert author Victor Giurgiutiu closes with a valuable discussion of the advantages and limitations of various sensors and methods, helping you to make informed choices in your structure research and development. The first comprehensive review of one of the most ardent research areas in aerospace structures, providing breadth and detail to bring engineers and researchers up to speed on this rapidly developing field Covers the main classes of SHM sensors, including fiber optic sensors, piezoelectric wafer active sensors, electrical properties sensors and conventional resistance strain gauges, and considers their applications and limitation Includes details of active approaches, including acousto-ultrasonics, vibration, frequency transfer function, guided-wave tomography, phased arrays, and electrochemical impedance spectroscopy (ECIS), among other emerging methods

Download or read book Fiber Optic Smart Structures written by Eric Udd and published by Wiley-Interscience. This book was released on 1995-04-17 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as an introduction and reference to fiber optic smart structures. Smart structures are used as sensors in a wide variety of applications and fields--from aerospace engineering to electrical engineering to civil engineering.

Download or read book Optical Fiber Sensing and Structural Health Monitoring Technology written by Yanliang Du and published by Springer. This book was released on 2019-01-10 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on optical fiber sensing and structural health monitoring technologies. It provides detailed information on the basic theory of F-P optical fiber sensors, fiber Bragg grating sensors, fiber laser grating sensors and fully distributed optical fiber sensors. Drawing on the authors’ research achievements and many years of practical experience in the field of engineering structure health monitoring, the book elaborates on the structural principle, design and manufacture of optical fiber sensors and monitoring technologies, and briefly describes advances made with regard to multiple engineering structures.

Download or read book Optical Sensors for Structural Health Monitoring written by Paulo Antunes and published by MDPI. This book was released on 2021-03-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution and need for the preservation and maintenance of existing structures, recent or historical, has fostered research in the area of structural monitoring, translated into the development of new techniques, equipment and sensors. Early detection of damage and accurate assessment of structural safety requires monitoring systems, the data from which can be used to calibrate numerical models for structural analysis and to assess safety. Data are obtained under real-time conditions, considering a group of parameters related to structural properties, such as stresses, accelerations, deformations and displacements. The analysis of structural properties is particularly relevant when the structure is subjected to extreme events (earthquakes, wind, fire and explosions, among others) or repeated loads (road/rail/air traffic, vibrations induced by equipment and machines), since they affect the structural integrity and put the users at risk. In order to prevent the severe damage and eventual collapse of structures, and consequent human, material and economic losses, the implementation of monitoring systems becomes a valuable tool for today's society. Monitoring of structures is becoming increasingly important, not only as preventive action, but also due to actual economic and sustainability concerns, to ensure a safer and more comfortable built environment.

Download or read book Structural Health Monitoring For Advanced Composite Structures written by M H Ferri Aliabadi and published by World Scientific. This book was released on 2017-12-18 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) is a relatively new and alternative way of non-destructive inspection (NDI). It is the process of implementing a damage detection and characterization strategy for composite structures. The basis of SHM is the application of permanent fixed sensors on a structure, combined with minimum manual intervention to monitor its structural integrity. These sensors detect changes to the material and/or geometric properties of a structural system, including changes to the boundary conditions and system connectivity, which adversely affect the system's performance.This book's primary focus is on the diagnostics element of SHM, namely damage detection in composite structures. The techniques covered include the use of Piezoelectric transducers for active and passive Ultrasonics guided waves and electromechanical impedance measurements, and fiber optic sensors for strain sensing. It also includes numerical modeling of wave propagation in composite structures. Contributed chapters written by leading researchers in the field describe each of these techniques, making it a key text for researchers and NDI practitioners as well as postgraduate students in a number of specialties including materials, aerospace, mechanical and computational engineering.

Download or read book Fiber Optic Sensors for Structural and Geotechnical Monitoring written by Michele Arturo Caponero and published by . This book was released on 2020 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of sensors based on fibre optic technology allows a broad range of applications in the fields of structural and geotechnical monitoring, which can effectively improve the maintenance of infrastructures and the safety of communities. Thanks to its valuable features, such as distributed monitoring, the easiness and endurance of cabling, long term stability, reliable responses in both static and dynamic regimes and fibre optic technology, innovative and efficient solutions to quite difficult monitoring problems have already been provided. The increasing worldwide attention to infrastructures and communities with resilience capabilities against natural disasters has opened up new and challenging perspectives of applications to the use of fibre optic technology for structural and geotechnical monitoring. This book collects contributions in the development and application of monitoring solutions, based on fibre optic technology for structural and geotechnical engineering works and issues. In the book preface, the content of the contributions is reviewed, pointing out the relevance of the work, with respect to the advance and spreading of fibre optic technology for monitoring applications. All contributions provide a comprehensive discussion and report a rich bibliography on the current trends and issues relative to the theme of the work presented.

Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.

Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.

Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.

Download or read book Sensing Issues in Civil Structural Health Monitoring written by Farhad Ansari and published by Springer Science & Business Media. This book was released on 2005-07-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil infrastructure systems are generally the most expensive assets in any country, and these systems are deteriorating at an alarming rate. In addition, these systems have a long service life in comparison to most other commercial products. As well, the introduction of intelligent materials and innovative design approaches in these systems is painfully slow due to heavy relianceon traditional construction and maintenance practices, and the conservative nature of design codes. Feedback on the "state of the health" of constructed systems is practically nonexistent. In the quest for lighter, stronger and corrosion-resistant structures, the replacement of ferrous materials by high-strength fibrous ones is being actively pursued in several countries around the world, both with respect to the design of new structures as well as for the rehabilitation and strengthening of existing ones. In North America, active research in the design of new highway bridges is focused on a number of specialty areas, including the replacement of steel reinforcing bars in concrete deck slabs by randomly distributed low-modulus fibers, and the replacement of steel prestressing cables for concrete components by tendons comprising super-strong fibers. Research is also being conducted on using FRPs to repair and strengthen existing structures.

Download or read book New Trends in Structural Health Monitoring written by Wieslaw Ostachowicz and published by Springer Science & Business Media. This book was released on 2013-01-18 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: A motivation for structural health monitoring. Structural health monitoring of aircraft structures. Vibration-based damage diagnosis and monitoring of external loads.Statistical time series methods for vibration based structural health monitoring. Fiber optic sensors. Damage localisation using elastic waves propagation methods experimental techniques. Application for wind turbine blades. Experts actively working in structural health monitoring and control techniques present the current research, areas of application and tendencies for the future of this technology, including various design issues involved. Examples using some of the latest hardware and software tools, experimental data from small scale laboratory demonstrators and measurements made on real structures illustrate the book. It will be a reference for professionals and students in the areas of engineering, applied natural sciences and engineering management.

Download or read book New Developments in Sensing Technology for Structural Health Monitoring written by Subhas Chandra Mukhopadhyay and published by Springer Science & Business Media. This book was released on 2011-07-14 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has focussed on the different aspects of sensing technology, i.e. high reliability, adaptability, recalibration, information processing, data fusion, validation and integration of novel and high performance sensors specifically aims to use to inspect mechanical health of structure and similar applications. This book is dedicated to Sensing systems for Structural Health Monitoring offers to variety of users, namely, Master and PhD degree students, researchers, practitioners, especially Civil and Construction engineers. The book will provide an opportunity of a dedicated and a deep approach in order to improve their knowledge in this specific field.