Download or read book Structural Mechanics written by Einar N. Strømmen and published by Springer Nature. This book was released on 2020-05-25 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book covers the principles and methods of load effect calculations that are necessary for engineers and designers to evaluate the strength and stability of structural systems. It contains the mathematical development from basic assumptions to final equations ready for practical use. It starts at a basic level and step by step it brings the reader up to a level where the necessary design safety considerations to static load effects can be performed, i.e. to a level where cross sectional forces and corresponding stresses can be calculated and compared to the strength of the system. It contains a comprehensive coverage of elastic buckling, providing the basis for the evaluation of structural stability. It includes general methods enabling designers to calculate structural displacements, such that the system may fulfil its intended functions. It is taken for granted that the reader possess good knowledge of calculus, differential equations and basic matrix operations. The finite element method for line-like systems has been covered, but not the finite element method for shells and plates.
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Energy Principles in Structural Mechanics written by Theodore R. Tauchert and published by . This book was released on 1981 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Structural Mechanics and Analysis written by Donald Adam DaDeppo and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a modern two-semester course in Structural Mechanics and Analysis. Designed to better prepare students for advanced studies in structural mechanics, this text focuses on the fundamental principles of mechanics and the basic assumptions that are the heart of the linear theory of structures. It explores the important classical methods for the analysis of statically determinate and statically indeterminate structures, and presents a uniquely different mode of reasoning and derivation of the virtual work method for calculating small displacements of structures.
Download or read book Computational Mechanics in Structural Engineering written by F.Y. Cheng and published by Elsevier. This book was released on 1999-02-16 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Sino-US Symposium Workshop on Recent Advancement of Computational Mechanics in Structural Engineering was held between May 25-28, 1998, in Dalian, China. The objectives were: to share the insights and experiences gained from recent developments in theory and practice; to assess the current state of knowledge in various topic areas of mechanics and computational methods and to identify joint research opportunities; to stimulate future cooperative research and to develop joint efforts in subjects of common needs and interests; to build and to strengthen the long-term bilateral scientific relationship between academic and professional practicing communities.Topics discussed covered the entire field of computational structural mechanics. These topics have advanced broad applications in the engineering practice of modern structural analysis, design and construction of buildings and other structures, and in natural hazard mitigation.
Download or read book Engineering Mechanics of Solids written by Louis L. Bucciarelli and published by . This book was released on 1994 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Structural Mechanics in Lightweight Engineering written by Christian Mittelstedt and published by Springer Nature. This book was released on 2021-07-01 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive yet concise presentation of the analysis methods of lightweight engineering in the context of the statics of beam structures and is divided into four sections. Starting from very general remarks on the fundamentals of elasticity theory, the first section also addresses plane problems as well as strength criteria of isotropic materials. The second section is devoted to the analytical treatment of the statics of beam structures, addressing beams under bending, shear and torsion. The third section deals with the work and energy methods in lightweight construction, spanning classical methods and modern computational methods such as the finite element method. Finally, the fourth section addresses more advanced beam models, discussing hybrid structures as well as laminated and sandwich beams, in addition to shear field beams and shear deformable beams. This book is intended for students at technical colleges and universities, as well as for engineers in practice and researchers in engineering.
Download or read book Mechanics of Civil Engineering Structures written by Laszlo P. Kollar and published by Woodhead Publishing. This book was released on 2020-10-20 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practicing engineers designing civil engineering structures, and advanced students of civil engineering, require foundational knowledge and advanced analytical and empirical tools. Mechanics in Civil Engineering Structures presents the material needed by practicing engineers engaged in the design of civil engineering structures, and students of civil engineering. The book covers the fundamental principles of mechanics needed to understand the responses of structures to different types of load and provides the analytical and empirical tools for design. The title presents the mechanics of relevant structural elements—including columns, beams, frames, plates and shells—and the use of mechanical models for assessing design code application. Eleven chapters cover topics including stresses and strains; elastic beams and columns; inelastic and composite beams and columns; temperature and other kinematic loads; energy principles; stability and second-order effects for beams and columns; basics of vibration; indeterminate elastic-plastic structures; plates and shells. This book is an invaluable guide for civil engineers needing foundational background and advanced analytical and empirical tools for structural design. - Includes 110 fully worked-out examples of important problems and 130 practice problems with an interaction solution manual (http://hsz121.hsz.bme.hu/solutionmanual) - Presents the foundational material and advanced theory and method needed by civil engineers for structural design - Provides the methodological and analytical tools needed to design civil engineering structures - Details the mechanics of salient structural elements including columns, beams, frames, plates and shells - Details mechanical models for assessing the applicability of design codes
Download or read book Structural Mechanics written by Ray Hulse and published by Bloomsbury Publishing. This book was released on 2018-03-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Structural Mechanics is an expanded and revised successor to the highly successful first edition, which over the last ten years has become a widely adopted standard first year text. The addition of five new programmes, together with some updating of the original text, now means that this book covers most of the principles of structural mechanics taught in the first and second years of civil engineering degree courses. - Suitable for independent study or as a compliment to a traditional lecture-based course - Adopts a programmed learning format, with a focus on student-centred learning - Contains many examples, carefully constructed questions and graded practical problems, allowing the reader to work at their own pace, and assess their progress whilst gaining confidence in their ability to apply the principles of Structural Mechanics - Now covering the major part of the Structural Mechanics/Analysis syllabuses of most Civil Engineering degree courses up to second year level.
Download or read book Fundamentals of Structural Mechanics written by Keith D. Hjelmstad and published by Springer Science & Business Media. This book was released on 2007-03-14 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A solid introduction to basic continuum mechanics, emphasizing variational formulations and numeric computation. The book offers a complete discussion of numerical method techniques used in the study of structural mechanics.
Download or read book Advanced Structural Mechanics written by Alberto Carpinteri and published by CRC Press. This book was released on 2017-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the author’s Structural Mechanics Fundamentals, this text presents a complete and uniform treatment of the more advanced topics in structural mechanics, ranging from beam frames to shell structures, from dynamics to buckling analysis, from plasticity to fracture mechanics, from long-span to high-rise civil structures. Plane frames Statically indeterminate beam systems: Method of displacements Plates and shells Finite element method Dynamics of discrete systems Dynamics of continuous elastic systems Buckling instability Long-span structures High-rise structures Theory of plasticity Plane stress and plane strain conditions Mechanics of fracture This book serves as a text for graduate students in structural engineering, as well as a reference for practising engineers and researchers.
Download or read book Structural Mechanics Fundamentals written by Alberto Carpinteri and published by CRC Press. This book was released on 2013-09-20 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Mechanics Fundamentals gives you a complete and uniform treatment of the most fundamental and essential topics in structural mechanics. Presenting a traditional subject in an updated and modernized way, it merges classical topics with ones that have taken shape in more recent times, such as duality. This book is extensively based on the introductory chapters to the author’s Structural Mechanics: A Unified Approach. Coverage includes: The basic topics of geometry of areas and of kinematics and statics of rigid body systems The mechanics of linear elastic solids—beams, plates, and three-dimensional solids—examined using a matrix approach The analysis of strain and stress around a material point The linear elastic constitutive law, with related Clapeyron’s and Betti’s theorems Kinematic, static, and constitutive equations The implication of the principle of virtual work The Saint Venant problem The theory of beam systems—statically determinate or indeterminate Methods of forces and energy for the examination of indeterminate beam systems The book draws on the author’s many years of teaching experience and features a wealth of illustrations and worked examples to help explain the topics clearly yet rigorously. The book can be used as a text for senior undergraduate or graduate students in structural engineering or architecture and as a valuable reference for researchers and practicing engineers.
Download or read book Computational Analysis of Randomness in Structural Mechanics written by Christian Bucher and published by CRC Press. This book was released on 2009-03-30 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proper treatment of structural behavior under severe loading - such as the performance of a high-rise building during an earthquake - relies heavily on the use of probability-based analysis and decision-making tools. Proper application of these tools is significantly enhanced by a thorough understanding of the underlying theoretical and computation
Download or read book Mechanics of Solids and Structures Second Edition written by Roger T. Fenner and published by CRC Press. This book was released on 2012-06-12 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: A popular text in its first edition, Mechanics of Solids and Structures serves as a course text for the senior/graduate (fourth or fifth year) courses/modules in the mechanics of solid/advanced strength of materials, offered in aerospace, civil, engineering science, and mechanical engineering departments. Now, Mechanics of Solid and Structure, Second Edition presents the latest developments in computational methods that have revolutionized the field, while retaining all of the basic principles and foundational information needed for mastering advanced engineering mechanics. Key changes to the second edition include full-color illustrations throughout, web-based computational material, and the addition of a new chapter on the energy methods of structural mechanics. Using authoritative, yet accessible language, the authors explain the construction of expressions for both total potential energy and complementary potential energy associated with structures. They explore how the principles of minimal total potential energy and complementary energy provide the means to obtain governing equations of the structure, as well as a means to determine point forces and displacements with ease using Castigliano’s Theorems I and II. The material presented in this chapter also provides a deeper understanding of the finite element method, the most popular method for solving structural mechanics problems. Integrating computer techniques and programs into the body of the text, all chapters offer exercise problems for further understanding. Several appendices provide examples, answers to select problems, and opportunities for investigation into complementary topics. Listings of computer programs discussed are available on the CRC Press website.
Download or read book Structural Mechanics Modelling and Analysis of Frames and Trusses written by Karl-Gunnar Olsson and published by John Wiley & Sons. This book was released on 2016-01-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook covers the fundamental theory of structural mechanics and the modelling and analysis of frame and truss structures Deals with modelling and analysis of trusses and frames using a systematic matrix formulated displacement method with the language and flexibility of the finite element method Element matrices are established from analytical solutions to the differential equations Provides a strong toolbox with elements and algorithms for computational modelling and numerical exploration of truss and frame structures Discusses the concept of stiffness as a qualitative tool to explain structural behaviour Includes numerous exercises, for some of which the computer software CALFEM is used. In order to support the learning process CALFEM gives the user full overview of the matrices and algorithms used in a finite element analysis
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
