Download or read book Structural Analysis of an Osseointegrated Dental Implant System written by M. Jane Morgan and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 1997 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Analysis of an Osseointegrated Dental Implant System written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Dental Implant bone System During and After Implantation written by Rudi Cobus Van Staden and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Development of an ideal substitute for missing teeth has been a major aim of dental practitioners for millennia. Modern dental implants are biocompatible screw-like titanium {u2018}fixtures{u2019} that are surgically placed into the jaws to replace missing teeth. Implants are superior to conventional prostheses, in both function and long-term predictability. In 2006 approximately 30,000 implants were placed in Australian patients. Implant sales have doubled in the last 5 years and are increasing by about 15% per year. Although implants exhibit excellent long-term retention (~95% after 5 years), there are significantly more failures in areas where bone quality and quantity is poor, resulting in poor patient outcomes and costs estimated at $15 million per year in Australia. Most failures arise from poor clinical technique and inadequate understanding of the potentially damaging stress characteristics during implant placement and function (chewing). Three-dimensional (3D) Finite Element Analysis (FEA) is a numerical method for analysing stresses and deformations in structures of any given geometry and under any load. There are reports on utilising 3D FEA to investigate implant-jawbone interactions after full osseointegration. However no work has been done to comprehensively quantify the performance of the bone-implant system during and after implantation. This research thus aims to develop a comprehensive FEA technique to evaluate the performance of the bone-implant system during the implantation process itself, as well as the healing and maintenance phases of osseointegration.
Download or read book Application of the Finite Element Method in Implant Dentistry written by Jianping Geng and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book creates the theoretical foundation that novices need to perform the finite element method in implant dentistry. It shows how both the implant dentist and the designer can benefit from finite element analysis. The authors explain the theory and math of the finite element method. Then, you get practical applications alongside discussions of the critical issues in using finite element analysis for dental implant design.
Download or read book Finite Element Stress Analysis of Bone Surrounding Osseointegrated Dental Implants written by Marianne Ierace Mayberry and published by . This book was released on 1987 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of an Osseo integrated Dental Implant written by Bernard Poncelet and published by . This book was released on 2001 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Short Implants written by Boyd J. Tomasetti and published by Springer Nature. This book was released on 2020-07-07 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive guide to short implants will take the reader through their research and development, explain the clinical indications, evaluate the outcomes achieved with various implants, and explore restorative and laboratory considerations. Short implants have steadily gained greater market share in the last decade as practitioners sought alternatives to traditional length implants in order to avoid grafting procedures. Current manufacturers offer a variety of implant lengths and widths, allowing surgeons and restorative dentists the ability to select the best implant for each clinical circumstance. Cutting edge information is provided on the research and clinical results achieved utilizing a range of implants, specifically those developed by Nobel Biocare, Straumann, Jack Hahn, and Bicon. Readers will also find an extensive description of the role of ultra-short implants involving reconstruction in both cleft patients and cancer patients who have lost portions of their mandible and/or maxilla. This book is a must-have for those interested in learning how the use of short and ultra-short implants offers both surgeons and restorative dentists an opportunity to stand out from those that use only the traditional length implants.
Download or read book Analysis and Design of Biological Materials and Structures written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection provides researchers and scientists with advanced analyses and materials design techniques in Biomaterials and presents mechanical studies of biological structures. In 16 contributions well known experts present their research on Stress and Strain Analysis, Material Properties, Fluid and Gas mechanics and they show related problems.
Download or read book Principles of BOI written by Stefan Ihde and published by Springer Science & Business Media. This book was released on 2005-08-31 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basal Osseointegration as a procedure developed on the basis of disc implantology is the method most commonly used for the unilateral treatment of advanced maxillary atrophy. The method is extremely well developed, because it was refined over a period of decades exclusively by practitioners and become established independently of the universities. The treatment aim can be achieved safely, easily and at low cost. Principles of BOI is most practical and explains exactly how things work. It provides treatment plans, tricks and pitfalls and step-by step guidance.
Download or read book Bone Response to Dental Implant Materials written by Adriano Piattelli and published by Woodhead Publishing. This book was released on 2016-10-27 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone Response to Dental Implant Materials examines the oral environment and the challenges associated with dental biomaterials. Understanding different in vivo and in vitro responses is essential for engineers to successfully design and tailor implant materials which will withstand the different challenges of this unique environment. This comprehensive book reviews the fundamentals of bone responses in a variety of implant materials and presents strategies to tailor and control them. Presents a specific focus on the development and use of biomaterials in the oral environment Discusses the basic science of the dental interface and its clinical applications Contains important coverage on the monitoring and analysis of the dental implant interface
Download or read book Osseointegrated Dental Technology written by Graham E. White and published by Quintessence Publishing (IL). This book was released on 1993 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for those dentists and dental technicians who wish to make prostheses specifically for implant support. The methods and materials necessary for making frameworks which fit accurately without corrective soldering form the basis of this innovative book. Here is a unique blend of research data and practical know-how with the objective of providing a dental technology as predictably reliable as the osseointegrated implants to which it is connected.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1995 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bone Implant Interface written by Hugh U. Cameron and published by St. Louis ; Toronto : Moseby. This book was released on 1994 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Finite Element Analysis of the Stress Distribution of an Osseointegrated Implant written by Aisling M. O'Mahony and published by . This book was released on 1997 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The maintenance of the osseointegrated implant bone interface is critical to the success of the osseointegrated implant. Many clinical studies have suggested that repeatedly excessive loads applied to the implant restoration, is one of the factors contributing to breakdown at the implant/bone interface and premature failures of the osseointegrated implant. In the single unit osseointegrated implant in the posterior mandible the mesiodistal and buccolingual widths of the crown are generally greater than the width of the implant fixture. The point of load application is one of the variables that influences the manner in which occlusal forces are transmitted to the implant and surrounding bone. Off axis loads applied to the crown create a cantilever effect and introduce bending moments which may cause excessive stresses at the implant bone interface. The wider the crown, the greater the potential for off axis loading. The purpose of this study was to evaluate and compare the effect of axial and off axis loads on the stress gradients at the oxxeointegrated implant/bone interface of a single unit posterior implant. Finite element analysis was used to evaluate the magnitude and location of stresses. Occlusal forces were modeled as axial and off axis vertical loading. The study showed that under load conditions the highest stresses were concentrated at the apex of the implant and at the crestal bone/implant interface. Off axis loading resulted in a large increase in compressive stresses in the crestal cortical bone on the side of the applied load, and a large increase in tensile stresses in the crestal cortical bone on the side opposite the applied load.
Download or read book Osseointegration in Oral Rehabilitation written by Ignace Naert and published by Quintessence Publishing (IL). This book was released on 1993 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bone Remodeling and Osseointegration of Implants written by Andy H. Choi and published by Springer Nature. This book was released on 2023-05-10 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an insight into the latest advances in bone fracture healing and remodeling algorithm and their incorporation into patient-specific finite element models and the use of machine learning and artificial intelligence to predict the bone regeneration and osseointegration process with a certain degree of accuracy. It also examines the applications of numerical models to simulate the fracture healing process, which may prove to be advantageous in determining the optimal mechanical-based treatment or reconstruction after an accident or illness. This book is aimed at medical and dental professionals who are involved in implantology and tissue engineering such as dentists, oral and maxillofacial surgeons, orthopedic surgeons, students, and researchers.
Download or read book Stress Analysis on the Bone Around Five Different Dental Implants written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantology has a widespread application in dental cases these days. Although the life of this practice is short, there has been considerable progress in this field and many research laboratories and production sites have been developed in this regard. There are various types of implants in the market, and there is a need to study their features to find out the advantages and disadvantages of them and choose the appropriate implant in each case. One major research is the study of stress distribution on the bone around the implant, which is an effective criterion in osseointegration. In this paper, stress analysis has been conducted on the bone by applying finite element method. A comparison has been performed among different models of dental implant fixtures.
