Download or read book Structural Analysis and Design to Prevent Disproportionate Collapse written by Feng Fu (Structural engineer) and published by . This book was released on 2016 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book features a detailed introduction to progressive collapse and the use of FE programs such as ABAQUS in modeling. Case studies based on various types of structures such as multi-story buildings, long-span space structures, and bridges demonstrate failure mechanisms and effective mitigation methods in practice"--
Download or read book Structural Analysis and Design to Prevent Disproportionate Collapse written by Feng Fu and published by CRC Press. This book was released on 2016-04-27 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard Guidance on Preventing Disproportionate CollapseDisproportionate collapse is a pressing issue in current design practice. Numerous causes are possible - especially forms of extreme loading, such as blast, fire, earthquake, or vehicle collisions. But it is the mechanism and its prevention which are of especial interest and concern.After the Wor
Download or read book Structural Analysis and Design to Prevent Disproportionate Collapse written by Feng Fu and published by CRC Press. This book was released on 2016-04-27 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard Guidance on Preventing Disproportionate CollapseDisproportionate collapse is a pressing issue in current design practice. Numerous causes are possible - especially forms of extreme loading, such as blast, fire, earthquake, or vehicle collisions. But it is the mechanism and its prevention which are of especial interest and concern.After the Wor
Download or read book Progressive Collapse of Structures written by Uwe Starossek and published by ICE Publishing. This book was released on 2017-12-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progressive Collapse of Structures, Second edition provides structural engineers with the practical and systematic frameworks they need to anticipate the risk of progressive and/or disproportionate collapse, and to apply this knowledge to the design of new structures as well as the retrofit design of existing structures.
Download or read book Practical Guide to Structural Robustness and Disproportionate Collapse in Buildings written by and published by . This book was released on 2010 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Modelling Techniques in Structural Design written by Feng Fu and published by John Wiley & Sons. This book was released on 2015-04-07 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful design and construction of iconic new buildings relies on a range of advanced technologies, in particular on advanced modelling techniques. In response to the increasingly complex buildings demanded by clients and architects, structural engineers have developed a range of sophisticated modelling software to carry out the necessary structural analysis and design work. Advanced Modelling Techniques in Structural Design introduces numerical analysis methods to both students and design practitioners. It illustrates the modelling techniques used to solve structural design problems, covering most of the issues that an engineer might face, including lateral stability design of tall buildings; earthquake; progressive collapse; fire, blast and vibration analysis; non-linear geometric analysis and buckling analysis . Resolution of these design problems are demonstrated using a range of prestigious projects around the world, including the Buji Khalifa; Willis Towers; Taipei 101; the Gherkin; Millennium Bridge; Millau viaduct and the Forth Bridge, illustrating the practical steps required to begin a modelling exercise and showing how to select appropriate software tools to address specific design problems.
Download or read book Proceedings written by Los Angeles Tall Buildings Structural Design Council. Meeting and published by . This book was released on 2003 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Robustness written by Franz Knoll and published by IABSE. This book was released on 2009 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robustness is the ability to survive unforeseen circumstances without undue damage or loss of function. It has become a requirement expressed in modern building codes, mostly without much advice as to how it can be achieved. Engineering has developed some approaches based on traditional practice as well as recent insight. However, knowledge about robustness remains scattered and ambiguous, making it difficult to apply to many specific cases. The author's attempt to collect and review elements, methods and strategies toward structural robustness, using a holistic, almost philosophical approach. This leads to a set of considerations to guide selection and implementation of measures in specific cases, followed by a collection of applications and examples from the authors practice. The world, engineering and construction are imperfect and not entirely predictable. Robustness provides a measure of structural safety beyond traditional codified design rules.
Download or read book Design and Analysis of Tall and Complex Structures written by Feng Fu and published by Butterworth-Heinemann. This book was released on 2018-02-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of tall buildings and complex structures involves challenging activities, including: scheme design, modelling, structural analysis and detailed design. This book provides structural designers with a systematic approach to anticipate and solve issues for tall buildings and complex structures. This book begins with a clear and rigorous exposition of theories behind designing tall buildings. After this is an explanation of basic issues encountered in the design process. This is followed by chapters concerning the design and analysis of tall building with different lateral stability systems, such as MRF, shear wall, core, outrigger, bracing, tube system, diagrid system and mega frame. The final three chapters explain the design principles and analysis methods for complex and special structures. With this book, researchers and designers will find a valuable reference on topics such as tall building systems, structure with complex geometry, Tensegrity structures, membrane structures and offshore structures. Numerous worked-through examples of existing prestigious projects around the world (such as Jeddah Tower, Shanghai Tower, and Petronas Tower etc.) are provided to assist the reader’s understanding of the topics. • Provides the latest modelling methods in design such as BIM and Parametric Modelling technique. • Detailed explanations of widely used programs in current design practice, such as SAP2000, ETABS, ANSYS, and Rhino. • Modelling case studies for all types of tall buildings and complex structures, such as: Buttressed Core system, diagrid system, Tube system, Tensile structures and offshore structures etc.
Download or read book Recent Developments In Civil Engineering written by Vijay Kumar, Anupam Rawat, R. P. Tiwari and published by BFC Publications. This book was released on with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book on Recent Developments in Civil engineering would likely focus on the latest advancements and innovations in the field of Civil Engineering. The book would cover a wide range of topics related to Civil engineering, such as sustainable infrastructure design, construction materials and construction techniques, transportation systems and infrastructure, geotechnical engineering, water resources and management, environmental engineering and sustainability of structures and its design.
Download or read book Fire Safety Design for Tall Buildings written by Feng Fu and published by CRC Press. This book was released on 2021-02-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Safety Design for Tall Buildings provides structural engineers, architects, and students with a systematic introduction to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design and the basic principles of fire development and heat transfer. It also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as the Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.
Download or read book Behaviour of Building Structures Subjected to Progressive Collapse written by Bo Yang and published by Woodhead Publishing. This book was released on 2022-02-18 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behaviour of Building Structures Subjected to Progressive Collapse gives in-depth and up-to-date quantitative and numerical analysis of building structures against progressive collapse. It does so at various levels, including bare steel joints, composite joints and sub-assemblages and frames under quasi-static loading conditions. The book provides analysis of the force transfer mechanisms of composite structures and reinforced concrete structures, along with detailed numerical models that shed light on the effects of critical parameters on progressive collapse resistances. It includes direct design methods that take into account various collapse-resisting mechanisms. The collapse of the World Trade Center in New York has spurred extensive experimental study and numerical analysis of the structural behavior of buildings under progressive collapse scenarios. Although design guidelines have been published by governments, most are missing up-to-date numerical and experimental results, quantitative accounts of force transfer mechanisms, and numerical guidelines. Offers in-depth analysis and numerical modeling for building structures against progressive collapse Provides analysis of the force-transfer mechanisms of composite and reinforced concrete structures Gives detailed numerical models that shed light on the effects of critical parameters on progressive resistances Includes direct design methods that take into account various collapse resisting mechanisms Offers a comprehensive reference for progressive collapse analysis and the design of building structures
Download or read book Resilience and Sustainability of Civil Infrastructures under Extreme Loads written by Zheng Lu and published by MDPI. This book was released on 2019-08-26 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many regions worldwide which are susceptible to extreme loads such as earthquakes. These can cause loss of life and adverse impacts on civil infrastructures, the environment, and communities. A series of methods and measures have been used to mitigate the effects of these extreme loads. The adopted approaches and methods must enable civil structures to be resilient and sustainable. Therefore, to reduce damage and downtime in addition to protecting life and promoting safety, new resilient structure technologies must be proposed and developed. This special issue book focuses on methods of enhancing the sustainability and resilience of civil infrastructures in the event of extreme loads (e.g., earthquakes). This book contributes proposals of and theoretical, numerical, and experimental research on new and resilient civil structures and their structural performance under extreme loading events. These works will certainly play a significant role in promoting the application of new recoverable structures. Moreover, this book also introduces some case studies discussing the implementation of low-damage structural systems in buildings as well as articles on the development of design philosophies and performance criteria for resilient buildings and new sustainable communities.
Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.
Download or read book Prevention Of Building Failure Against Progressive Collapsing written by Ketan Bajaj and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: PREVENTION OF BUILDING AGAINST PROGRESSIVE COLLAPSE: According to the modern scenario, most of the structures follow progressive collapse phenomenon. Even though buildings are designed to resist for all probable loads without any failure of structural member, they fail occasionally due to insufficient and poor design and construction techniques, especially for extreme and abnormal loads. This book deals with the analysis and design of G+3, G+ 5, G+ 7 and G+12 (with 10 different cases) storey buildings in SAP-2000 by performing Non-linear Dynamic Alternative Path Method. The variation of base shear and spectral acceleration and displacement of buildings along with deformations of the beams and axial deformation of columns over the height of the structure had evaluated & analysed and its effects on the load redistribution has also discussed, identified and characterized with the removal of column at various positions. The book will has immense benefit in structural designing of buildings against progressive collapse failure.
Download or read book Structural Design for Physical Security written by Task Committee on Structural Design for Physical Security and published by ASCE Publications. This book was released on 1999-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.
Download or read book Design for the Prevention of Progressive Collapse Using Interactive Computer Graphics written by John Lewis Gross and published by . This book was released on 1980 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
