Download or read book Strategic Innovation For Micro Mechatronics Nachiket Prakashan written by Dr. Bharatbhushan Joshi and published by Nachiket Prakashan. This book was released on 2017-01-30 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Electro-Mechanical System technology is invading in all the applications such as automobile, medical, consumer products and weapon systems. Design of a sensor based on MEMS technology involves complex large number of steps and many variables. This book gives insight on predictive design technique for sensor design.The book also discusses two innovative techniques for optimizing performance of micro-acceleration sensor. This book will be useful to learners of course on MEMS.

Download or read book Indigenous Technology for Smarter Mankind 2nd Edition written by Dr. Bharatbhushan P Joshi and published by Nachiket Prakashan. This book was released on 2020-08-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of “Indigenous Technology for Smarter Mankind” gives you full spectrum of various technologies which have been developed indigenously for creation of safe, secure and smarter mankind. The preface of the book is written by Shri Vishram Jamdar, Chairman GC of VNIT for first edition and by Prof. Prabhat Ranjan, VC of DYPIU for the second edition and Foreword for the book is written by Dr. VK Saraswat, member NITI Ayog. The book is a collection of my articles on MEMS technology, Environmental Technology, Space technology and Defence technology. The articles give in-depth knowledge about hi-tech weapon systems, India’s missions such as Mangalyaan, Chandrayaan-2 in a very simple and lucid language. The articles on Navigation system, technical support from skies for warriors and ASAT interceptor are beautifully written making you feel proud of our scientists. There are lots of take-aways from this book for the youth who are studying Science, Engineering and are preparing for civil services exams as an addition to their GK; and is useful for teaching professionals to keep themselves updated with latest knowledge. Do read the book and give me feedback in my Linked-In [https://www.linkedin.com/in/dr-bp-joshi-bb0b932/] message box.

Download or read book Applied Numerical Methods with MATLAB for Engineers and Scientists written by Steven C. Chapra and published by McGraw-Hill Science/Engineering/Math. This book was released on 2008 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Still brief - but with the chapters that you wanted - Steven Chapra’s new second edition is written for engineering and science students who need to learn numerical problem solving. This text focuses on problem-solving applications rather than theory, using MATLAB throughout. Theory is introduced to inform key concepts which are framed in applications and demonstrated using MATLAB. The new second edition feature new chapters on Numerical Differentiation, Optimization, and Boundary-Value Problems (ODEs).

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Proceeding of International Conference on Intelligent Communication Control and Devices written by Rajesh Singh and published by Springer. This book was released on 2016-09-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents high-quality research papers presented at the first international conference, ICICCD 2016, organised by the Department of Electronics, Instrumentation and Control Engineering of University of Petroleum and Energy Studies, Dehradun on 2nd and 3rd April, 2016. The book is broadly divided into three sections: Intelligent Communication, Intelligent Control and Intelligent Devices. The areas covered under these sections are wireless communication and radio technologies, optical communication, communication hardware evolution, machine-to-machine communication networks, routing techniques, network analytics, network applications and services, satellite and space communications, technologies for e-communication, wireless Ad-Hoc and sensor networks, communications and information security, signal processing for communications, communication software, microwave informatics, robotics and automation, optimization techniques and algorithms, intelligent transport, mechatronics system, guidance and navigation, algorithms, linear/non-linear control, home automation, sensors, smart cities, control systems, high performance computing, cognition control, adaptive control, distributed control, prediction models, hybrid control system, control applications, power system, manufacturing, agriculture cyber physical system, network control system, genetic control based, wearable devices, nano devices, MEMS, bio-inspired computing, embedded and real-time software, VLSI and embedded systems, FPGA, digital system and logic design, image and video processing, machine vision, medical imaging, and reconfigurable computing systems.

Download or read book Advances in Industrial and Production Engineering written by Rakesh Kumar Phanden and published by Springer Nature. This book was released on 2021-03-21 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the 2nd International Conference on Future Learning Aspects of Mechanical Engineering (FLAME) 2020. In particular, this volume discusses different topics of industrial and production engineering such as sustainable manufacturing processes, logistics, Industry 4.0 practices, circular economy, lean six sigma, agile manufacturing, additive manufacturing, IoT and Big Data in manufacturing, 3D printing, simulation, manufacturing management and automation, surface roughness, multi-objective optimization and modelling for production processes, developments in casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as industry professionals.

Download or read book Data Management Analytics and Innovation written by Valentina Emilia Balas and published by Springer. This book was released on 2018-08-09 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the latest, high-quality, technical contributions and research findings in the areas of data management and smart computing, big data management, artificial intelligence and data analytics, along with advances in network technologies. It discusses state-of-the-art topics as well as the challenges and solutions for future development. It includes original and previously unpublished international research work highlighting research domains from different perspectives. This book is mainly intended for researchers and practitioners in academia and industry.

Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2018-10-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Microfluidic Biochips focuses on the automated design and production of microfluidic-based biochips for large-scale bioassays and safety-critical applications. Bridging areas of electronic design automation with microfluidic biochip research, the authors present a system-level design automation framework that addresses key issues in the design, analysis, and testing of digital microfluidic biochips. The book describes a new generation of microfluidic biochips with more complex designs that offer dynamic reconfigurability, system scalability, system integration, and defect tolerance. Part I describes a unified design methodology that targets design optimization under resource constraints. Part II investigates cost-effective testing techniques for digital microfluidic biochips that include test resource optimization and fault detection while running normal bioassays. Part III focuses on different reconfiguration-based defect tolerance techniques designed to increase the yield and dependability of digital microfluidic biochips. Expanding upon results from ongoing research on CAD for biochips at Duke University, this book presents new design methodologies that address some of the limitations in current full-custom design techniques. Digital Microfluidic Biochips is an essential resource for achieving the integration of microfluidic components in the next generation of system-on-chip and system-in-package designs.

Download or read book Medical Biosensors for Point of Care POC Applications written by Roger Narayan and published by Woodhead Publishing. This book was released on 2016-08-21 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical Biosensors for Point of Care (POC) Applications discusses advances in this important and emerging field which has the potential to transform patient diagnosis and care. Part 1 covers the fundamentals of medical biosensors for point-of-care applications. Chapters in part 2 go on to look at materials and fabrication of medical biosensors while the next part looks at different technologies and operational techniques. The final set of chapters provide an overview of the current applications of this technology. Traditionally medical diagnostics have been dependent on sophisticated technologies which only trained professionals were able to operate. Recent research has focused on creating point-of-care diagnostic tools. These biosensors are miniaturised, portable, and are designed to be used at the point-of-care by untrained individuals, providing real-time and remote health monitoring. - Provides essential knowledge for designers and manufacturers of biosensors for point-of-care applications - Provides comprehensive coverage of the fundamentals, materials, technologies, and applications of medical biosensors for point-of-care applications - Includes contributions from leading international researchers with extensive experience in developing medical biosensors - Discusses advances in this important and emerging field which has the potential to transform patient diagnosis and care

Download or read book Gene and Cell Therapy Biology and Applications written by Giridhara R. Jayandharan and published by Springer. This book was released on 2018-09-12 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in stem cell biology, nanotechnology and gene therapy have opened new avenues for therapeutics. The availability of molecular therapeutics that rely on the delivery of DNA, RNA or proteins, harnessing enhanced delivery with nanoparticles, and the regenerative potential of stem cells (adult, embryonic or induced pluripotent stem cells) has had a tremendous impact on translational medicine. The chapters in this book cover a range of strategies for molecular and cellular therapies for human disease, their advantages, and central challenges to their widespread application. Potential solutions to these issues are also discussed in detail. Further, the book addresses numerous advances in the field of molecular therapeutics that will be of interest to the general scientific community. Lastly, the book provides specific examples of disease conditions for which these strategies have been transferred to the clinic. As such, it will be extremely useful for all students, researchers and clinicians working in the field of translational medicine and molecular therapeutics.

Download or read book ICT Systems and Sustainability written by Milan Tuba and published by Springer Nature. This book was released on 2022-01-04 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes new technologies and discusses future solutions for ICT design infrastructures, as reflected in high-quality papers presented at the 6th International Conference on ICT for Sustainable Development (ICT4SD 2021), held in Goa, India, on 5–6 August 2021. The book covers the topics such as big data and data mining, data fusion, IoT programming toolkits and frameworks, green communication systems and network, use of ICT in smart cities, sensor networks and embedded system, network and information security, wireless and optical networks, security, trust, and privacy, routing and control protocols, cognitive radio and networks, and natural language processing. Bringing together experts from different countries, the book explores a range of central issues from an international perspective.

Download or read book International Conference on Innovative Computing and Communications written by Ashish Khanna and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at the Fourth International Conference on Innovative Computing and Communication (ICICC 2021), which is held at the Shaheed Sukhdev College of Business Studies, University of Delhi, Delhi, India, on February 20-21, 2021. Introducing the innovative works of scientists, professors, research scholars, students and industrial experts in the field of computing and communication, the book promotes the transformation of fundamental research into institutional and industrialized research and the conversion of applied exploration into real-time applications.

Download or read book Innovations in Mechanical Engineering written by G. S. V. L. Narasimham and published by Springer Nature. This book was released on 2022-03-02 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Innovations in Mechanical Engineering (ICIME 2021). It presents innovative ideas and new findings in the field of mechanical engineering. Various topics covered in this book are aerospace engineering, automobile engineering, thermal engineering, renewable energy sources, bio-mechanics, fluid mechanics, MEMS, mechatronics, robotics, CAD/CAM, CAE, CFD, design andoptimization, tribology, materials engineering and metallurgy, mimics, surface engineering, nanotechnology, polymer science, manufacturing, production management, industrial engineering and rapid prototyping. This book will be useful for the students, researchers and professionals working in the various areas of mechanical engineering.

Download or read book Carbon Nanotube and Graphene Nanoribbon Interconnects written by Debaprasad Das and published by CRC Press. This book was released on 2017-12-19 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Alternative to Copper-Based Interconnect Technology With an increase in demand for more circuit components on a single chip, there is a growing need for nanoelectronic devices and their interconnects (a physical connecting medium made of thin metal films between several electrical nodes in a semiconducting chip that transmit signals from one point to another without any distortion). Carbon Nanotube and Graphene Nanoribbon Interconnects explores two new important carbon nanomaterials, carbon nanotube (CNT) and graphene nanoribbon (GNR), and compares them with that of copper-based interconnects. These nanomaterials show almost 1,000 times more current-carrying capacity and significantly higher mean free path than copper. Due to their remarkable properties, CNT and GNR could soon replace traditional copper interconnects. Dedicated to proving their benefits, this book covers the basic theory of CNT and GNR, and provides a comprehensive analysis of the CNT- and GNR-based VLSI interconnects at nanometric dimensions. Explore the Potential Applications of CNT and Graphene for VLSI Circuits The book starts off with a brief introduction of carbon nanomaterials, discusses the latest research, and details the modeling and analysis of CNT and GNR interconnects. It also describes the electrical, thermal, and mechanical properties, and structural behavior of these materials. In addition, it chronicles the progression of these fundamental properties, explores possible engineering applications and growth technologies, and considers applications for CNT and GNR apart from their use in VLSI circuits. Comprising eight chapters this text: Covers the basics of carbon nanotube and graphene nanoribbon Discusses the growth and characterization of carbon nanotube and graphene nanoribbon Presents the modeling of CNT and GNR as future VLSI interconnects Examines the applicability of CNT and GNR in terms of several analysis works Addresses the timing and frequency response of the CNT and GNR interconnects Explores the signal integrity analysis for CNT and GNR interconnects Models and analyzes the applicability of CNT and GNR as power interconnects Considers the future scope of CNT and GNR Beneficial to VLSI designers working in this area, Carbon Nanotube and Graphene Nanoribbon Interconnects provides a complete understanding of carbon-based materials and interconnect technology, and equips the reader with sufficient knowledge about the future scope of research and development for this emerging topic.

Download or read book Automated Fabrication written by Marshall Burns and published by Prentice Hall. This book was released on 1993 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on extensive research, this reference shows how automated fabrication--also known as desktop manufacturing and rapid prototyping--may be used to increase productivity. A popular writer and speaker, Burns is founder of Ennex Fabrication Technologies which concentrates on research, development and marketing in automated fabrication. Burns edited and coauthored Rapid Prototyping: System Selection and Implementation Guide.

Download or read book Machine Learning Paradigms written by Maria Virvou and published by Springer. This book was released on 2019-03-16 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent machine learning paradigms and advances in learning analytics, an emerging research discipline concerned with the collection, advanced processing, and extraction of useful information from both educators’ and learners’ data with the goal of improving education and learning systems. In this context, internationally respected researchers present various aspects of learning analytics and selected application areas, including: • Using learning analytics to measure student engagement, to quantify the learning experience and to facilitate self-regulation; • Using learning analytics to predict student performance; • Using learning analytics to create learning materials and educational courses; and • Using learning analytics as a tool to support learners and educators in synchronous and asynchronous eLearning. The book offers a valuable asset for professors, researchers, scientists, engineers and students of all disciplines. Extensive bibliographies at the end of each chapter guide readers to probe further into their application areas of interest.