Download or read book Steels written by D. T. Llewellyn and published by Elsevier. This book was released on 2013-10-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use. Standard specifications and some of the design considerations that provide satisfactory service performance are considered. Brief reference is also made to some of the steel prices that were effective on January 1, 1991. Comprised of five chapters, this book begins with an overview of technological trends in the steelmaking industry since 1980s, paying particular attention to energy conservation, iron-making, continuous casting, and product requirements. The next chapter is devoted to low-carbon strip steels and their cold-forming behavior, applications, and metallurgical factors affecting cold formability. The third chapter focuses on low-carbon structural steels and their strengthening mechanisms, while the fourth chapter considers engineering steels and their heat treatment aspects. The final chapter describes stainless steels and their composition-structure relationships, commercial grades, corrosion resistance, welding, and cold working. The mechanical properties of stainless steels at elevated and sub-zero temperatures are also examined. This monograph will be of interest to students and practicing metallurgists.

Download or read book Steels Metallurgy and Applications written by David Llewellyn and published by Elsevier. This book was released on 1998-02-24 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: STEELS: Metallurgy and Applications provides a metallurgical understanding of commercial steel grades and the design, manufacturing and service requirements that govern their application. The properties of different steels are described, detailing the effect of composition, processing and heat treatment. Where appropriate an introduction is given to standard specifications and design codes provided on component manufacture and property requirements for successful service performance.The book deals with steel products in some depth, in four chapters covering wide strip, structural steels, engineering and stainless steel grades. At the begining of each chapter an overview is given which details important features of the grades and a historical perspective of their development. Also featured are up to date information on steel prices and specifications.David Llewellyn has over thirty years experience in the steel industry and is currently lecturing in the Materials Engineering Department at University College Swansea.'..the book unfolds into an easily readable and a valuable source of highly relevant and contemporary information on steels' - METALS AND MATERIALS'.. a high quality product from all points of view' - INSTITUTE OF METALS AND MATERIALS AUSTRALASIA features up to date information on steel prices and specifications.

Download or read book Steel Metallurgy written by S. K. Mandal and published by McGraw Hill Professional. This book was released on 2015-01-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated resource covers the characteristics, properties, specifications, heat treatment, and application of steels for engineering students, non-metallurgical engineers, and technicians. There’s a saying that “steel makes the world.” From a tiny pin in a sewing kit to home appliances to cars to bridges, steel is everywhere. While there are numerous books on steel, few, if any, address the true application of steels in a practical manner. This book was written to fill that gap. Divided into four parts, Steel Metallurgy: Properties, Specifications, and Applications covers the basic metallurgical facts and characteristics, properties, standards, and grades of steel. Classifications of steel based on standards and structural engineering are then discussed, followed by heat treatment and welding of steels. The book then focuses on the application of steel and its reliability and failures, and shows, through numerous illustrations and case studies, how it’s processed and used for various purposes. Armed with the information in this book, metallurgical and engineering students will become truly “industry ready.” Case studies and illustrations show steel being used in practical, everyday applications, making the book user friendly yet comprehensive Lays the ground work for steel selection, and discusses the methods of selection Contains appendices with steel grades, compositions, and standards; physical data and conversions; temperature, hardness, and work/energy conversion tables Includes a glossary of important metallurgical terms

Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in the Physical Metallurgy and Applications of Steels written by Metals Society and published by . This book was released on 1982 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials

Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries

Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.

Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.

Download or read book High Nitrogen Steels written by Valentin G. Gavriljuk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic research and new manufacturing methods have led to high nitrogen steels (HNS), a promising new group of materials for use in advanced applications in mechanical and chemical engineering. The book deals with the atomic structure, constitution, properties, manufacturing and application of martensitic, austenitic, duplex and dualphase steels of superior strength and corrosion resistance. Combining metallurgy and engineering aspects. It gives a detailed overview and presents new results on HNS. The book is intended for scientists as well as technologists, who will find stimulating information.

Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.

Download or read book Powder Metallurgy of Iron and Steel written by Randall M. German and published by Wiley-Interscience. This book was released on 1998-03-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to current practices Powder metallurgy processes increasingly dominate the production of iron and steel components for a variety of machines, appliances, automobiles, and tools. These processes yield high-quality precision components, recycle scrap metals into useful powders, and consume less energy than traditional manufacturing methods. Despite the tremendous growth in this area, however, until now there has been no guide on practical issues in the field. Powder Metallurgy of Iron and Steel fills the need for a fundamental, nonmathematical treatment of this technology. Focusing on the most useful applications and the advantages of different production techniques, this systematic, self-contained volume provides serious help in tackling production problems on the factory floor. It covers the gamut of practical topics, from injection molding and compaction processes to sintering, full-density processes, heat treatments, finishing operations, and the mechanical properties of many products, including die-compacted steels. Written by a leading authority and designer of educational programs for the industry, Powder Metallurgy of Iron and Steel: Emphasizes current practices and real engineering materials in everyday manufacturing processes Keeps the mathematics simple, boxing the calculations outside the main body of text Includes research articles and trade information from a variety of sources Features numerous pictures and flow diagrams Includes an appendix with an extensive list of definitions This important tutorial for an expanding work force is accessible to scientists and engineers alike, as well as technicians, production supervisors, designers, consultants, and marketing personnel. It is also an excellent textbook for undergraduate and industrial courses.

Download or read book Steel Metallurgy for the Non Metallurgist written by John D. Verhoeven and published by ASM International. This book was released on 2007-01-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts--beginning at the level of high-school chemistry classes--and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. It was inspired by the author when working with practicing bladesmiths for more than 15 years. Most chapters in the book contain a summary at the end. These summaries provide a short review of the contents of each chapter. This book is THE practical primer on steel metallurgy for those who heat, forge, or machine steel.

Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.

Download or read book HSLA Steels written by J. Malcolm Gray and published by . This book was released on 1987 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tool Steels written by Rafael A. Mesquita and published by CRC Press. This book was released on 2016-12-19 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy book provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Supplying a solid understanding of the metallurgy involved, the text explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. It also explores real-life case studies and failure analyses, offering examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. While the book offers deep coverage of properties, microstructure, and manufacturing, its focus is on describing the performance of each application of this special class of ferrous materials. Provides a single, up-to-date source of information for increasing the life of tool steels through optimized design and manufacturing. Explains how material compositions, manufacturing processes, heat treatments, surface hardening techniques, and coatings affect tool steel properties, grades, and performance. Supplies a solid understanding of the metallurgy involved in tool steel manufacturing, machining, hot and cold working, and molding. Offers examples of die-life parameters and hints for modifying tool steels and heat treatments during cutting or forming processes. Includes real-life case studies and failure analyses from the Villares Metals plant in Brazil.

Download or read book Metallurgy and Mechanics of Welding written by Regis Blondeau and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview on the subject of welding. Written by a group of expert contributors, the book covers all welding methods, from traditional to high-energy plasmas and lasers. The reference presents joint welding, stainless steel welding, aluminum welding, welding in the nuclear industry, and all aspects of welding quality control.