Download or read book Steel Plate Shear Walls with Gravity Load Theory and Design written by Yang Lv and published by Springer Nature. This book was released on 2022-02-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by subject experts based on the recent research results in steel plate shear walls considering the gravity load effect. It establishes a vertical stress distribution of the walls under compression and in-plane bending load and an inclination angle of the tensile field strip. The stress throughout the inclined tensile strip, as we consider the effect of the vertical stress distribution, is determined using the von Mises yield criterion. The shear strength is calculated by integrating the shear stress along the width. The proposed theoretical model is verified by tests and numerical simulations. Researchers, scientists and engineers in the field of structural engineering can benefit from the book. As such, this book provides valuable knowledge, useful methods, and practical algorithms that can be considered in practical design of building structures adopting a steel shear wall system.

Download or read book Design and Analysis of Steel Plate Shear Walls written by and published by . This book was released on 2008 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plate shear walls are investigated as a lateral load resisting system with particular interest towards seismic loads. Past physical testing is studied in order to determine trends in failure modes and design considerations. Analysis is conducted on data from two, large scale, steel plate shear walls that were tested under quasi-static loading. The investigation includes energy dissipation, axial forces in members, bending moment, curvature, infill stresses, and shear distribution. Recommendations are made for future projects.

Download or read book Steel Plate Shear Walls written by Rafael Sabelli and published by . This book was released on 2006 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Self centering Steel Plate Shear Walls written by Patricia M. Clayton and published by . This book was released on 2010 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Behavior and Design of Composite Steel Plate Shear Walls written by Abolhassan Astaneh-Asl and published by . This book was released on 2002 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Recommendations for Perforated Steel Plate Shear Walls written by Ronny Purba and published by . This book was released on 2007 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Buildings written by Stanley W. Crawley and published by John Wiley & Sons. This book was released on 1993 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the general principles of structural analysis and their application to the design of low and intermediate height building frames. The text is accompanied by software for the analysis of axial forces, displacement and the bending moment and the determination of shear.

Download or read book Experimental Study of Steel Plate Shear Walls written by Geoffrey L. Kulak and published by Edmonton, Alta. : Department of Civil Engineering, University of Alberta. This book was released on 1983 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Download or read book Steel Composite Structures written by and published by Research Publishing Service. This book was released on 2010 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Technologies for Energy Environment and Sustainable Development Vol 1 written by Mohan Lal Kolhe and published by Springer Nature. This book was released on 2022-02-25 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains select proceedings of the International Conference on Smart Technologies for Energy, Environment, and Sustainable Development (ICSTEESD 2020). The book is broadly divided into the themes of energy, environment, and sustainable development; and discusses the significance and solicitations of intelligent technologies in the domain of energy and environmental systems engineering. Topics covered in this book include sustainable energy systems including renewable technologies, energy efficiency, techno-economics of energy system and policies, integrated energy system planning, environmental management, energy efficient buildings and communities, sustainable transportation, smart manufacturing processes, etc. The book will be a valuable reference for young researchers, professionals, and policy makers working in the areas of energy, environment and sustainable development.

Download or read book The Analysis of Irregular Shaped Structures Diaphragms and Shear Walls written by Terry R. Malone and published by McGraw Hill Professional. This book was released on 2011-12-05 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Guide to Solving Lateral Load Path Problems The Analysis of Irregular Shaped Structures: Diaphragms and Shear Walls explains how to calculate the forces to be transferred across multiple discontinuities and reflect the design requirements on construction documents. Step-by-step examples offer progressive coverage, from basic to very advanced illustrations of load paths in complicated structures. The book is based on the 2009 International Building Code, ASCE/SEI 7-05, the 2005 Edition of the National Design Specification for Wood Construction, and the 2008 Edition of the Special Design Provisions for Wind and Seismic (SDPWS-08). COVERAGE INCLUDES: Code sections and analysis Diaphragm basics Diaphragms with end horizontal offsets Diaphragms with intermediate offsets Diaphragms with openings Open front and cantilever diaphragms Diaphragms with vertical offsets Complex diaphragms with combined openings and offsets Standard shear walls Shear walls with openings Discontinous shear walls Horizontally offset shear walls The portal frame Rigid moment-resisting frame walls--the frame method of analysis

Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.

Download or read book Ductile Design of Steel Structures 2nd Edition written by Michel Bruneau and published by McGraw Hill Professional. This book was released on 2011-08-01 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of the background and design requirements for plastic and seismic design of steel structures Thoroughly revised throughout, Ductile Design of Steel Structures, Second Edition, reflects the latest plastic and seismic design provisions and standards from the American Institute of Steel Construction (AISC) and the Canadian Standard Association (CSA). The book covers steel material, cross-section, component, and system response for applications in plastic and seismic design, and provides practical guidance on how to incorporate these principles into structural design. Three new chapters address buckling-restrained braced frame design, steel plate shear wall design, and hysteretic energy dissipating systems and design strategies. Eight other chapters have been extensively revised and expanded, including a chapter presenting the basic seismic design philosophy to determine seismic loads. Self-study problems at the end of each chapter help reinforce the concepts presented. Written by experts in earthquake-resistant design who are active in the development of seismic guidelines, this is an invaluable resource for students and professionals involved in earthquake engineering or other areas related to the analysis and design of steel structures. COVERAGE INCLUDES: Structural steel properties Plastic behavior at the cross-section level Concepts, methods, and applications of plastic analysis Building code seismic design philosophy Design of moment-resisting frames Design of concentrically braced frames Design of eccentrically braced frames Design of steel energy dissipating systems Stability and rotation capacity of steel beams

Download or read book Ultimate Limit State Analysis and Design of Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2018-03-02 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and describes both the fundamental and practical design procedures for the ultimate limit state design of ductile steel plated structures The new edition of this well-established reference reviews and describes both fundamentals and practical design procedures for steel plated structures. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Furthermore, this book is also an easily accessed design tool, which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs, which can be downloaded. Ultimate Limit State Design of Steel Plated Structures provides expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, and selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached. Covers recent advances and developments in the field Includes new topics on constitutive equations of steels, test database associated with low/elevated temperature, and strain rates Includes a new chapter on a semi-analytical method Supported by a companion website with illustrative example data sheets Provides results for existing mechanical model tests Offers a thorough discussion of assumptions and the validity of underlying expressions and solution methods Designed as both a textbook and a handy reference, Ultimate Limit State Design of Steel Plated Structures, Second Edition is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. It also meets the needs of structural designers or researchers who are involved in civil, marine, and mechanical engineering as well as offshore engineering and naval architecture.

Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.

Download or read book Experimental Investigation of Full scale Two story Steel Plate Shear Walls with Reduced Beam Section Connections written by and published by . This book was released on 2008 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: