Download or read book Statistical Energy Methods for Vibration Transmission Analysis of Complex Structures written by Sungbae Choi and published by . This book was released on 1997 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On Developing New Statistical Energy Methods for the Analysis of Vibration Transmission in Complex Vehicle Structures written by C. Pierre and published by . This book was released on 1997 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Energy Analysis written by A. J. Keane and published by Cambridge University Press. This book was released on 1997-03-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1997 volume provides an overview of statistical energy analysis and its applications in structural vibration. Statistical energy analysis is a powerful method for predicting and analysing the vibrational behaviour of structures. Its main use is for structures that can be considered as assemblies of interconnected subsystems which are subject to medium to high frequency vibration sources. This volume brings together nine articles by experts from around the world. The opening chapter gives an introduction and overview of the technique describing its key successes, potential and limitations. Following chapters look in more detail at a selection of cases and examples which together illustrate the scope and power of the technique. This book is based on a Royal Society Philosophical Transactions issue under the title 'Statistical Energy Analysis', but an extra chapter, by Chohan, Price, Keane and Beshara, discussing nonconservatively coupled systems is included in this edition.

Download or read book Engineering Vibroacoustic Analysis written by Stephen A. Hambric and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes analytical methods (based primarily on classical modal synthesis), the Finite Element Method (FEM), Boundary Element Method (BEM), Statistical Energy Analysis (SEA), Energy Finite Element Analysis (EFEA), Hybrid Methods (FEM-SEA and Transfer Path Analysis), and Wave-Based Methods. The book also includes procedures for designing noise and vibration control treatments, optimizing structures for reduced vibration and noise, and estimating the uncertainties in analysis results. Written by several well-known authors, each chapter includes theoretical formulations, along with practical applications to actual structural-acoustic systems. Readers will learn how to use vibroacoustic analysis methods in product design and development; how to perform transient, frequency (deterministic and random), and statistical vibroacoustic analyses; and how to choose appropriate structural and acoustic computational methods for their applications. The book can be used as a general reference for practicing engineers, or as a text for a technical short course or graduate course.

Download or read book A Wave Component Approach to the Analysis of Vibrations in Complex Structures written by Eric C. N. Wester and published by . This book was released on 2001 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundation of Statistical Energy Analysis in Vibroacoustics written by A. Le Bot and published by OUP Oxford. This book was released on 2015-05-28 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth study of the foundations of statistical energy analysis, with a focus on examining the statistical theory of sound and vibration. In the modal approach, an introduction to random vibration with application to complex systems having a large number of modes is provided. For the wave approach, the phenomena of propagation, group speed, and energy transport are extensively discussed. Particular emphasis is given to the emergence of the diffuse field, the central concept of the theory. All important notions are gradually introduced—-making the text self-contained—-to lead the reader to the ultimate result of `coupling power proportionality' and the concept of `vibrational temperature'. Further key topics include the analogy between thermodynamics and sound vibration. Applications are concerned with random vibration in mass—spring resonators, strings, beams, rods, and plates but also reverberation in room acoustics, radiation of sound, and sound response.

Download or read book Theory and Application of Statistical Energy Analysis written by Richard H Lyon and published by Elsevier. This book was released on 2014-06-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date second edition provides a comprehensive examination of the theory and application of Statistical Energy Analysis (SEA) in acoustics and vibration. Complete with examples and data taken from real problems this unique book also exploresthe influence of computers on SEA and emphasizes computer based SEA calculations. In addition to a discussion of the relationship between SEA and other procedures used in response estimation, Theory and Application of Statistical Energy Anlaysis, SecondEdition, explores the basic relationships between model and wave descriptions of systems.

Download or read book IUTAM Symposium on the Vibration Analysis of Structures with Uncertainties written by Alexander K. Belyaev and published by Springer Science & Business Media. This book was released on 2010-12-02 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium was aimed at the theoretical and numerical problems involved in modelling the dynamic response of structures which have uncertain properties due to variability in the manufacturing and assembly process, with automotive and aerospace structures forming prime examples. It is well known that the difficulty in predicting the response statistics of such structures is immense, due to the complexity of the structure, the large number of variables which might be uncertain, and the inevitable lack of data regarding the statistical distribution of these variables. The Symposium participants presented the latest thinking in this very active research area, and novel techniques were presented covering the full frequency spectrum of low, mid, and high frequency vibration problems. It was demonstrated that for high frequency vibrations the response statistics can saturate and become independent of the detailed distribution of the uncertain system parameters. A number of presentations exploited this physical behaviour by using and extending methods originally developed in both phenomenological thermodynamics and in the fields of quantum mechanics and random matrix theory. For low frequency vibrations a number of presentations focussed on parametric uncertainty modelling (for example, probabilistic models, interval analysis, and fuzzy descriptions) and on methods of propagating this uncertainty through a large dynamic model in an effi cient way. At mid frequencies the problem is mixed, and various hybrid schemes were proposed. It is clear that a comprehensive solution to the problem of predicting the vibration response of uncertain structures across the whole frequency range requires expertise across a wide range of areas (including probabilistic and non-probabilistic methods, interval and info-gap analysis, statistical energy analysis, statistical thermodynamics, random wave approaches, and large scale computations) and this IUTAM symposium presented a unique opportunity to bring together outstanding international experts in these fields.

Download or read book Extension of Vibrational Power Flow Techniques to Two Dimensional Structures written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-20 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the analysis of the vibration response and structure-borne vibration transmission between elements of a complex structure, statistical energy analysis (SEA) or finite element analysis (FEA) are generally used. However, an alternative method is using vibrational power flow techniques which can be especially useful in the mid frequencies between the optimum frequency regimes for SEA and FEA. Power flow analysis has in general been used on 1-D beam-like structures or between structures with point joints. In this paper, the power flow technique is extended to 2-D plate-like structures joined along a common edge without frequency or spatial averaging the results, such that the resonant response of the structure is determined. The power flow results are compared to results obtained using FEA results at low frequencies and SEA at high frequencies. The agreement with FEA results is good but the power flow technique has an improved computational efficiency. Compared to the SEA results the power flow results show a closer representation of the actual response of the structure. Cuschieri, Joseph M. Unspecified Center NAG1-685; RTOP 535-03-11-03...

Download or read book Statistical Energy Analysis written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1987 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Energy Analysis of Vibration Transmission Into an Instrument Package written by Terry D. Scharton and published by . This book was released on 1967 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IUTAM Symposium on Statistical Energy Analysis written by F.J. Fahy and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a record of the proceedings of the Symposium on Statistical Energy Analysis (SEA) held at the University of Southampton in July 1997 which was held under the auspices of the International Union of Theoretical and Applied Mechanic~. Theoretical SEA is form of modelling the vibrational and acoustical behaviour of complex mechanical systems which has undergone a long period of gestation before recent maturation into a widely used engineering design and analysis tool which is supported by a rapidly growing supply of commercial software. SEA also provides a framework for associated experimental measurement procedures, data analysis and interpretation. Under the guidance of the members of a distinguished International Scientific Committee, participants were individually invited from the broad spectrum of 'SEAfarers', including academics, consultants, industrial engineers, software developers and research students. The Symposium aimed to reflect the balance of world-wide activity in SEA, although some eminent members of the SEA community were, sadly, unable to attend. In particular, Professor Richard Lyon and Dr Gideon Maidanik, two of the principal originators of SEA, were sorely missed. This publication contains copies of all the papers presented to the Symposium together with a summary of the associated discussions which contains valuable comments upon the contents of the formal papers together with the views of participants on some fundamental issues which remain to be resolved.

Download or read book Vibroacoustic Simulation written by Alexander Peiffer and published by John Wiley & Sons. This book was released on 2022-05-11 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: VIBROACOUSTIC SIMULATION Learn to master the full range of vibroacoustic simulation using both SEA and hybrid FEM/SEA methods Vibroacoustic simulation is the discipline of modelling and predicting the acoustic waves and vibration of particular objects, systems, or structures. This is done through finite element methods (FEM) or statistical energy analysis (SEA) to cover the full frequency range. In the mid-frequency range, both methods must be combined into a hybrid FEM/SEA approach. By doing so, engineers can model full frequency vibroacoustic simulations in complex technical systems used in aircraft, trains, cars, ships, and satellites. Indeed, hybrid approaches are increasingly used in the automotive, aerospace, and rail industries. Previously covered primarily in scientific journals, Vibroacoustic Simulation provides a practical approach that helps readers master the full frequency range of vibroacoustic simulation. Through a systematic approach, the book illustrates why both FEM and SEA are necessary in acoustic engineering and how both can be used in combination through hybrid methodologies. Striking a crucial balance between complex theories and practical applications, the text provides real-world examples of vibroacoustic simulation, such as fuselage simulation, interior-noise prediction for electric and combustion vehicles, train profiles, and more, to help elucidate the concepts described within. Vibroacoustic Simulation also features: A balance of complex theories with the nuts and bolts of real-world applications Detailed worked examples of junction equations Case studies from companies like Audi and Airbus that illustrate how the methods discussed have been applied in real-world projects A companion website that provides corresponding Python codes for all examples, allowing readers to work through the examples on their own Vibroacoustic Simulation is a useful reference for acoustic and mechanical engineers working in the automotive, aerospace, defense, or rail industries, as well as researchers and graduate students studying acoustics.

Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1989 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Uncertain Dynamic Systems written by Shankar P. Bhattacharyya and published by CRC Press. This book was released on 2020-09-23 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of 34 papers presented by leading researchers at the International Workshop on Robust Control held in San Antonio, Texas in March 1991. The common theme tying these papers together is the analysis, synthesis, and design of control systems subject to various uncertainties. The papers describe the latest results in parametric understanding, H8 uncertainty, l1 optical control, and Quantitative Feedback Theory (QFT). The book is the first to bring together all the diverse points of view addressing the robust control problem and should strongly influence development in the robust control field for years to come. For this reason, control theorists, engineers, and applied mathematicians should consider it a crucial acquisition for their libraries.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: