Download or read book Statics and Dynamics of Alloy Phase Transformations written by Patrice E.A. Turchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of phase transformations in substitutional alloys, including order disorder phenomena and structural transformations, plays a crucial role in understanding the physical and mechanical properties of materials, and in designing alloys with desired technologically important characteristics. Indeed, most of the physical properties, including equilibrium properties, transport, magnetic, vibrational as well as mechanical properties of alloys are often controlled by and are highly sensitive to the existence of ordered compounds and to the occurrence of structural transformations. Correspondingly, the alloy designer facing the task of processing new high-performance materials with properties that meet specific industrial applications must answer the following question: What is the crystalline structure and the atomic configuration that an alloy may exhibit at given temperature and concentration? Usually the answer is sought in the phase-diagram of a relevant system that is often determined experimentally and does not provide insight to the underlying mechanisms driving phase stability. Because of the rather tedious and highly risky nature of developing new materials through conventional metallurgical techniques, a great deal of effort has been expended in devising methods for understanding the mechanisms contrOlling phase transformations at the microscopic level. These efforts have been bolstered through the development of fully ab initio, accurate theoretical models, coupled with the advent of new experimental methods and of powerful supercomputer capabilities.
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Phase Transformations in Metals and Alloys Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 2009-02-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to cover developments in the field over the past 17 years, and now reprinted to correct errors in the prior printing, Phase Transformation in Metals and Alloys, Third Edition provides information and examples that better illustrate the engineering relevance of this topic. It supplies a comprehensive overview of specific types o
Download or read book Properties of Complex Inorganic Solids 2 written by Annemarie Meike and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The triennial International Alloy Conferences (lACs) aim at the identification and promotion of the common elements developed in the study, either experimental, phenomenological, or theoretical and computational, of materials properties across materials types, from metals to minerals. To accomplish this goal, the lACs bring together scientists from a wide spectrum of materials science including experiment, theory, modeling, and computation, incorporating a broad range of materials properties. The first lAC, lAC-I, took place in Athens, Greece, June 16-21, 1996. The present volume of proceedings contains the papers presented at IAC-2, that took place in Davos, Switzerland, August 8-13, 1999. The topics in this book fall into several themes, which suggest a number of different classification schemes. We have chosen a scheme that classifies the papers in the volume into the categories Microstructural Properties; Ordering, Kinetics and Diffusion; Magnetic Properties and Elastic Properties. We have juxtaposed apparently disparate of revealing the dynamic character approaches to similar physical processes, in the hope of the processes under consideration. We hope this will invigorate new kinds of discussion and reveal challenges and new avenues to the description and prediction of properties of materials in the solid state and the conditions that produce them.
Download or read book Alloy Physics written by Wolfgang Pfeiler and published by John Wiley & Sons. This book was released on 2008-01-08 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the latest research in alloy physics together with the underlying basic principles, this comprehensive book provides a sound understanding of the structural changes in metals and alloys -- ranging from plastic deformation, deformation dynamics and ordering kinetics right up to atom jump processes, first principle calculations and simulation techniques. Alongside fundamental topics, such as crystal defects, phase transformations and statistical thermodynamics, the team of international authors treats such hot areas as nano-size effects, interfaces, and spintronics, as well as technical applications of modern alloys, like data storage and recording, and the possibilities offered by materials design.
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by . This book was released on 1981 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Diagrams written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-written text is for non-metallurgists and anyone seeking a quick refresher on an essential tool of modern metallurgy. The basic principles, construction, interpretation, and use of alloy phase diagrams are clearly described with ample illustrations for all important liquid and solid reactions. Gas-metal reactions, important in metals processing and in-service corrosion, also are discussed. Get the basics on how phase diagrams help predict and interpret the changes in the structure of alloys.
Download or read book Phase transformations in metals and alloys written by David A. Porter and published by . This book was released on 1991 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase transformations in metals and alloys written by David A. Porter and published by . This book was released on 1981 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CALPHAD Calculation of Phase Diagrams A Comprehensive Guide written by N. Saunders and published by Elsevier. This book was released on 1998-06-09 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph acts as a benchmark to current achievements in the field of Computer Coupling of Phase Diagrams and Thermochemistry, often called CALPHAD which is an acronym for Computer CALculation of PHAse Diagrams. It also acts as a guide to both the basic background of the subject area and the cutting edge of the topic, combining comprehensive discussions of the underlying physical principles of the CALPHAD method with detailed descriptions of their application to real complex multi-component materials. Approaches which combine both thermodynamic and kinetic models to interpret non-equilibrium phase transformations are also reviewed.
Download or read book Disordered Alloys written by Werner Schweika and published by Springer Science & Business Media. This book was released on 1998 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph reviews the subject of structural disorder in alloys and describes how structural information can be exploited to build sound theoretical descriptions in terms of modified Ising models. Scattering with thermal neutrons and x-rays prove to be complementary approaches to measure the weak diffuse scattering which provides detailed information about the disorder. The authors show how Monte Carlo methods are applied to determine the most realistic effective interactions among the alloying atoms. These results can be used as a benchmark for modern electronic structure calculations. Of more general interest, the limitations of scattering experiments in a determination of an interaction model, and thus also of the structure itself are discussed. Finally, simulations exhibit not only near-surface disordering due to frustration effects but also new possible surface - induced ordering phenomena. Accurate Monte Carlo simulations are used to test existing theories of wetting.
Download or read book Multiscale Modeling written by Pedro Derosa and published by CRC Press. This book was released on 2010-12-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the relevant features and properties of nanosystems necessarily depend on nanoscopic details, their performance resides in the macroscopic world. To rationally develop and accurately predict performance of these systems we must tackle problems where multiple length and time scales are coupled. Rather than forcing a single modeling approach to
Download or read book Evolution of Phase Transitions written by Rohan Abeyaratne and published by Cambridge University Press. This book was released on 2006-05-08 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2006 work began with the author's exploration of the applicability of the finite deformation theory of elasticity when various standard assumptions such as convexity of various energies or ellipticity of the field equations of equilibrium are relinquished. The finite deformation theory of elasticity turns out to be a natural vehicle for the study of phase transitions in solids where thermal effects can be neglected. This text will be of interest to those interested in the development and application of continuum-mechanical models that describe the macroscopic response of materials capable of undergoing stress- or temperature-induced transitions between two solid phases. The focus is on the evolution of phase transitions which may be either dynamic or quasi-static, controlled by a kinetic relation which in the framework of classical thermomechanics represents information that is supplementary to the usual balance principles and constitutive laws of conventional theory.
Download or read book Electronic Structure of Alloys Surfaces and Clusters written by Abhijit Mookerjee and published by CRC Press. This book was released on 2002-11-28 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the electronic structure of solids is a basic part of theoretical investigation in physics. Application of investigative techniques requires the solid under investigation to be "periodic." However, this is not always the case. This volume addresses three classes of "non-periodic" solids currently undergoing the most study: alloys, sur
Download or read book Metallic Alloys Experimental and Theoretical Perspectives written by J.S. Faulkner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new materials is recognized as one of the major elements in the overall technological evolution that must go on in order to sustain and even improve the quality of life for citizens of all nations. There are many components to this development, but one is to achieve a better understanding of the properties of materials using the most sophisticated scientific tools that are available. As condensed matter physicists and materials scientists work toward this goal, they find that it is useful to divide their efforts and focus on specific areas, because certain analytical and theoretical techniques will be more useful for the study of one class of materials than another. One such area is the study of metals and metallic alloys, which are used in the manufacture of products as diverse as automobiles and space stations. Progress in this area has been very rapid in recent years, and the new developments come from many different countries. For these reasons the Advanced Research Workshop Programme in the NATO Scientific Affairs Division has seen fit to sponsor several meetings to bring together the researchers and students working in this field from the NATO countries and elsewhere. There have been a series of NATO-ASI's that have dealt with the results of research on the electronic structure of materials and the properties of metals, alloys, and interfaces. They are: "Electrons in finite and infinite structures" P. Phariseau and L.
Download or read book Phase Transformations and Evolution in Materials written by Patrice E. A. Turchi and published by Minerals, Metals, & Materials Society. This book was released on 2000 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the TMS Annual Meeting & Exhibition, held in Nashville, Tennessee, in March, 2000. The symposium emphasizes both theoretical and experimental aspects of phase transformations and evolutions in materials. Topics addressed in papers include: mechanical properties of structurally heterogeneous systems; simulations of structural transformations; large-scale modelling of microstructure evolution in martensites; applying the concentration wave method to predict ordering phenomena in substitutional alloys and ceramic materials; and use of the phase field method to study coherent transformations.
Download or read book Modeling and Simulation of Heterogeneous Catalytic Reactions written by Olaf Deutschmann and published by John Wiley & Sons. This book was released on 2013-09-18 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize in Chemistry 2007 awarded to Gerhard Ertl for his groundbreaking studies in surface chemistry highlighted the importance of heterogeneous catalysis not only for modern chemical industry but also for environmental protection. Heterogeneous catalysis is seen as one of the key technologies which could solve the challenges associated with the increasing diversification of raw materials and energy sources. It is the decisive step in most chemical industry processes, a major method of reducing pollutant emissions from mobile sources and is present in fuel cells to produce electricity. The increasing power of computers over the last decades has led to modeling and numerical simulation becoming valuable tools in heterogeneous catalysis. This book covers many aspects, from the state-of-the-art in modeling and simulations of heterogeneous catalytic reactions on a molecular level to heterogeneous catalytic reactions from an engineering perspective. This first book on the topic conveys expert knowledge from surface science to both chemists and engineers interested in heterogeneous catalysis. The well-known and international authors comprehensively present many aspects of the wide bridge between surface science and catalytic technologies, including DFT calculations, reaction dynamics on surfaces, Monte Carlo simulations, heterogeneous reaction rates, reactions in porous media, electro-catalytic reactions, technical reactors, and perspectives of chemical and automobile industry on modeling heterogeneous catalysis. The result is a one-stop reference for theoretical and physical chemists, catalysis researchers, materials scientists, chemical engineers, and chemists in industry who would like to broaden their horizon and get a substantial overview on the different aspects of modeling and simulation of heterogeneous catalytic reactions.
