Download or read book Standardization of Work Measurement Volume 9 Miscellaneous Occupations Transportation Packaging Materials Handling written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1977 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Miscellaneous Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Miscellaneous Occupations as categorized by the Department of Labor includes those occupations concerned with transportation services (surface, water and air); materials handling, packaging and warehousing; utilities; amusement, recreation and motion picture services; mining and logging; graphic arts; and various other activities. This volume provides a single DoD source for Standard Time Data elements which can be used in the development of labor standards for: 1.1.1 Organizations, activities or functional areas whose primary mission correlates to miscellaneous occupations, e.g., surface, water and air transport and terminal operations; packaging or packing; materials handling, warehousing. 1.1.2 Miscellaneous type operations which are accomplished in organizations, activities or functional areas with primary missions not correlated to Miscellaneous Occupations, e.g., packagers or material handlers assigned to maintenance or machine shops. 1.1.3 Elements of work performed by personnel whose primary job is other than Miscellaneous but who may actually do that type work as part of their job, e.g., a machinist attaching and operating a hoist to a part being machined, (materials handling), a mechanic unpacking a part to be installed, (packaging), or a construction worker handling materials, (materials handling).
Download or read book Standardization of work measurement written by United States. Office of the Assistant Secretary of Defense (Installations and Logistics) and published by . This book was released on 1975 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standardization of Work Measurement written by United States. Department of Defense and published by . This book was released on 1977 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to standardize instructions, methods, terminology and standard time data applicable to work measurement and the development of labor performance standards. The use of this manual is intended to: a. Maximize the productivity of industrial/management engineering personnel by providing a more rapid means of establishing labor performance standards and eliminating duplication in labor performance standards development. b. Foster the increased use of engineered performance standards by making available standard time data of stated accuracy and reliability structured for maximum ease of application. c. Promote appropriate application of more efficient methods of performing work. d. Provide uniformity in labor performance standards development by standardizing the application of various work measurement techniques. e. Facilitate communication by providing common terminology and definitions.
Download or read book Standardization of Work Measurement Volume 5 Processing Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Processing Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Processing Occupations as categorized by the Department of Labor includes those occupations concerned with refining, mixing, compounding, chemically treating, heat treating. or similarly working materials and products. Knowledge of a process and adherence to formulae other specifications are required in some degree. Vats, stills, ovens, furnaces, mixing machines, crushers, grinders, and related equipment or machines are usually involved. This volume provides a single DoD source for Standard Time Data which can be used in the development of labor standards for: Organizations, activities, or functional areas whose primary missions correlate to processing occupations, e.g., an activity whose primary responsibility is plating chemical cleaning, sandblasting, etc. For processing operations within organizations, activities, or functional areas engaged in other than processing occupations, e.g., a degreaser operator assigned to an instrument repair shop. Work performed by personnel whose primary jobs are other than processing, but who may actually do that type work as a part of their jobs, e.g., a packer performing a degreasing operation within a supply activity.
Download or read book Standardization of Work Measurement Volume 3 Service Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Service Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Service Occupations as categorized by the Department of Labor includes those occupations concerned with performing tasks in and around private households; serving individuals in institutions and in commercial and other establishments; and protecting the public against crime, fire, accidents, and acts of war. This volume provides a single DoD source for Standard Time Data elements which can be used in the development of labor standards for: Organizations, activities, or functional areas whose primary missions correlate to service occupations, e.g., an activity whose primary responsibility is janitorial. laundry, food services, shoe repair, health service attendants, etc. 1.1.2 For service operations within organizations, activities, or functional areas engaged in other than service occupations, e.g., a janitor assigned to a machine shop. Elements of work performed by personnel whose primary jobs are other than service, but who may actually do that type work as a part of their jobs; e.g. a mechanic in a maintenance shop performing janitorial duties.
Download or read book Standardization of Work Measurement Volume 7 Bench Work Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Bench Work Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Bench Work Occupations as categorized by the Department of Labor includes those occupations concerned with the use of body members, handtools, and bench machines to fit, grind, carve, mold, paint, sew, assemble, inspect, repair, test, and similarly work relatively small objects and materials, such as metal products, electronic components, electrical appliances, instruments, footwear, and garments. The work is usually performed at a set position in a mill, plant, or shop, at a bench, worktable, or conveyor. At the more complex levels, workers frequently read blueprints, follow patterns, use a variety of handtools, and assume responsibility for meeting standards. Workers of the less complex levels are required to follow standardized procedures.
Download or read book Standardization of Work Measurement Volume 8 Structural Work Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of DoD 5010.15.l-M, Standardization of Work Measurement, is one of a series published under the authority of DoD Directive 5010.15, Defense Integrated Management Engineering System (DIMES). It provides standard time data for Structural Occupations as classified by Department of Labor codes and includes guidelines for uniform application. Some of the tasks covered in these occupations are assembly of aircraft and vehicles, sheet metal work and welding. Others are oriented to the building trades and include masonry, carpentry, plumbing, and other related occupations. Maximum use of the guidelines and standard time data is mandatory at each Department of Defense activity where Labor Performance Standards are developed and applied. All of the included standard time data have been reviewed and approved by a Joint Service/Agency Standard Time Data Group prior to publication.
Download or read book Standardization of Work Measurement Volume 2 Clerical and Sales Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Clerical and Sales Occupations standard time data is one of several volumes included in the Defense Work Measurement Standard Time Data Program (DWMSTDP). It provides a single DoD source of clerical standard time data to be used in the economical development of labor standards for: Organizations, functions, or activities whose primary mission is clerical in nature, e.g., Finance, Data Processing, and Personnel Administration. Clerical jobs which are a part of organizations, functions, or activities whose primary mission is not clerical in nature, e.g., clerks, typists, and keypunch operators. Elements of work performed by personnel whose primary job is other than clerical but who do clerical work as a part of their job, e.g., filing of shop orders, filling out forms, sorting documents, and telephoning. This publication applies to all military services and defense agencies. The data contained herein will be used to the maximum extent possible in the development of labor performance standards in compliance with DoD Directive 5010.31 and DoD Instruction 5010.34.
Download or read book Standardization of Work Measurement Basic Volume General Guidance written by United States. Department of Defense and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standardization of Work Measurement Volume 10 Universal Common to Two Or More Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Universal Standard Time Data is one of eleven volumes included in DWMSTDP. It is termed "Universal" because it provides a single DOD source for standard time data elements which can be used in the development of labor standards in several occupation categories. This publication applies to all military services and defense agencies. The data contained herein will be used to the maximum extent possible in the development of labor performance standards. The Universal Standard Time Data contained in this volume are to be applied in accordance with the general instructions contained in the Basic Volume and the specific instructions contained in this volume. All newly developed or existing Universal Standard Time Data elements not now included herein should be submitted with back-up motion pattern analysis to the Defense Industrial Resources Support off ice (DIRSO), for review, coordination, and inclusion in the updating changes to this volume. The Basic Volume contains procedures for submitting these data elements.
Download or read book Standardization of Work Measurement Volume 6 Machine Trades Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Machine Trades Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Machine Trades Occupations as categorized by the Department of Labor includes those occupations concerned with feeding, tending, operating, controlling, and setting up machines to cut, bore, mill, abrade, print, and similarly work such materials as metal, paper, wood, and stone. This includes understanding machine functions, reading blueprints, making mathematical computations and exercising Judgement to attain conformance to specifications. Disassembly, repair, reassembly, installation, and maintenance of machines and mechanical equipment, and weaving, knitting, spinning, and similarly working textiles are also included.
Download or read book Engineered Work Measurement written by Delmar W. Karger and published by Industrial Press Inc.. This book was released on 1987 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes extensive information on I.E. and work measurement software. Focuses on the MTM material that has been refined for more than three decades. Provides accurate answers to all questions regarding MTM-1 found in the MTM Association for Standards and Research MTM-1 Examinations. Covers the minimum work measurement background essential to all who must understand and apply MTM-1.
Download or read book Master Standard Data written by Richard M. Crossan and published by McGraw-Hill Companies. This book was released on 1972 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Implementing Standardized Work written by Alain Patchong and published by CRC Press. This book was released on 2015-11-24 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standardized Work refers to the process of finding and applying the best operational methods that will lead to cost reduction, better product quality, and increased operator safety. This book, the latest in a series dedicated to Standardized Work, focuses on operator training and auditing. It describes the methods and tools used to train operators
Download or read book Standardization of Work Measurement written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management Bulletin A Work Measurement System written by United States. Bureau of the Budget and published by . This book was released on 1950 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Work Measurement System Development and Use written by United States. Bureau of the Budget and published by . This book was released on 1950 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
