Download or read book Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Fracturing Operations written by Nicholas P. Cheremisinoff and published by John Wiley & Sons. This book was released on 2015-01-28 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing, commonly referred to as “fracking,” is a technique used by the oil and gas industry to mine hydrocarbons trapped deep beneath the Earth’s surface. The principles underlying the technology are not new. Fracking was first applied at the commercial level in the United States as early as 1947, and over the decades it has been applied in various countries including Canada, the UK, and Russia. The author worked with engineering teams as early as the mid-1970s in evaluating ways to improve oil recovery from this practice. By and large fracking was not an economically competitive process and had limited applications until the early 2000s. Several factors altered the importance of this technology, among them being significant technological innovations in drilling practices with impressive high tech tools for exploration, well construction and integrity, and recovery along with discoveries of massive natural gas reserves in the United States and other parts of the world. These factors have catapulted the application of the technology to what is best described as the gold rush of the 21st century, with exploration and natural gas plays proceeding at a pace that seemingly is unrivaled by any historical industrial endeavor. But this level of activity has invoked widespread criticism from concerned citizens and environmental groups in almost every nation across the Globe. This outstanding new volume offers the industry a handbook of environmental management practices that can mitigate risks to the environment and, through best practices and current technologies, to conform to the current standards and regulations that are in place to provide the world with the energy it needs while avoiding environmental damage. For the new hire, veteran engineer, and student alike, this is a one-of-a-kind volume, a must-have for anyone working in hydraulic fracturing.
Download or read book Environmental Considerations Associated with Hydraulic Fracturing Operations written by James A. Jacobs and published by John Wiley & Sons. This book was released on 2019-04-05 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to environmental and communication issues related to fracking and the best approach to protect communities Environmental Considerations Associated with Hydraulic Fracturing Operations offers a much-needed resource that explores the complex challenges of fracking by providing an understanding of the environmental and communication issues that are inherent with hydraulic fracturing. The book balances the current scientific knowledge with the uncertainty and risks associated with hydraulic fracking. In addition, the authors offer targeted approaches for helping to keep communities safe. The authors include an overview of the historical development of hydraulic fracturing and the technology currently employed. The book also explores the risk, prevention, and mitigation factors that are associated with fracturing. The authors also include legal cases, regulatory issues, and data on the cost of recovery. The volume presents audit checklists for gathering critical information and documentation to support the reliability of the current environmental conditions related to fracking operations and the impact fracking can have on a community. This vital resource: Contains the technical information and mitigation recommendations for safety and environmental issues related to hydraulic fracturing Offers an historical overview of conventional and unconventional oil and gas drilling Explains the geologic and technical issues associated with fracking of tight sand and shale formulations Presents numerous case studies from the United States EPA and other agencies Discusses issues of co-produced waste water and induced seismicity from the injection of wastewater Written for environmental scientists, geologists, engineers, regulators, city planners, attorneys, foresters, wildlife biologists, and others, Environmental Considerations Associated with Hydraulic Fracturing Operations offers a comprehensive resource to the complex environmental and communication issues related to fracking.
Download or read book Handbook of Hydraulic Fracturing written by James G. Speight and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an up-to-date description of current and new hydraulic fracturing processes Details Emerging Technologies such as Fracture Treatment Design, Open Hole Fracturing, Screenless Completions, Sand Control, Fracturing Completions and Productivity Covers Environmental Impact issues including Geological Disturbance; Chemicals used in Fracturing; General Chemicals; Toxic Chemicals; and Air, Water, Land, and Health impacts Provides many process diagrams as well as tables of feedstocks and their respective products
Download or read book Environmental Issues Concerning Hydraulic Fracturing written by and published by Academic Press. This book was released on 2017-10-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Issues Concerning Hydraulic Fracturing, Volume One captures the state-of-the-art research currently used to evaluate the potential impact of unconventional gas and oil gas extraction processes. Topics in this comprehensive guide on the topic include chapters on The Human Health Implications of Unconventional Oil and Gas Development, The use of Noble Gas Analysis and other Forensic Techniques in Characterizing Contamination Pathways Associated with Oil and Gas Development, Well Integrity, Contamination Mechanisms and Groundwater Impacts Associated with Unconventional Oil and Gas Development, and Advances in Fracturing and Well Construction: Improving Efficiency and Reducing Risks. This serial explores a wide breadth of emerging and state-of-the-art technologies used to study the potential environmental impact and various processes in the massive industrial process of shale exploration and resource extraction. Covers a wide breadth of emerging and state-of-the-art technologies Includes contributions from an International board of authors Provides a comprehensive set of reviews, covering the potential impact of unconventional gas and oil gas extraction processes
Download or read book Hydraulic Fracturing Explained written by Erle C. Donaldson and published by Elsevier. This book was released on 2014-02-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocks mechanics legend Erle Donaldson, along with colleagues Waqi Alam and Nasrin Begum from the oil and gas consultant company Tetrahedron, have authored this handbook on updated fundamentals and more recent technology used during a common hydraulic fracturing procedure. Meant for technical and non-technical professionals interested in the subject of hydraulic fracturing, the book provides a clear and simple explanation of the technology and related issues to promote the safe development of petroleum reserves leading to energy independence throughout the world.
Download or read book Hydraulic Fracturing in Unconventional Reservoirs written by Hoss Belyadi and published by Gulf Professional Publishing. This book was released on 2019-06-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing in Unconventional Reservoirs: Theories, Operations, and Economic Analysis, Second Edition, presents the latest operations and applications in all facets of fracturing. Enhanced to include today’s newest technologies, such as machine learning and the monitoring of field performance using pressure and rate transient analysis, this reference gives engineers the full spectrum of information needed to run unconventional field developments. Covering key aspects, including fracture clean-up, expanded material on refracturing, and a discussion on economic analysis in unconventional reservoirs, this book keeps today's petroleum engineers updated on the critical aspects of unconventional activity. Helps readers understand drilling and production technology and operations in shale gas through real-field examples Covers various topics on fractured wells and the exploitation of unconventional hydrocarbons in one complete reference Presents the latest operations and applications in all facets of fracturing
Download or read book Local Regional and State Government Perspectives on Hydraulic Fracturing related Oil and Gas Development written by Samuel Gallaher and published by . This book was released on 2013 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States is in the midst of an extraordinary oil and natural gas development boom. The use of hydraulic fracturing and horizontal drilling (fracking) has opened numerous shale and other porous formations to oil and gas development in nearly every region of the continent. Given the potential positive and negative impacts of oil and gas resource extraction on local communities, the purpose of this study is to develop a better understanding of the above issues and their potential solutions from a local and regional governance perspective. To do so we contacted local government and regional planning officials, with the aid of nationally reaching member organizations, to determine their perception of issues and management solutions, via interviews and surveys, associated with recent oil and gas development.
Download or read book Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using Diesel Fuels written by U. S. Environmental U.S. Environmental Protection Agency and published by CreateSpace. This book was released on 2015-03-15 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance provides technical recommendations for protecting underground sources of drinking water (USDWs) from potential endangerment posed by hydraulic fracturing (HF) activities where diesel fuels are used. The U.S. Environmental Protection Agency (EPA) developed this guidance for EPA permit writers to ensure protection of USDWs in accordance with the Safe Drinking Water Act (SDWA) and Underground Injection Control (UIC) regulatory authority. This authority is limited to when diesel fuels are used in fluids or propping agents pursuant to oil, gas and geothermal activities. This document does not establish any new permitting requirements for HF activities using diesel fuels, but describes the EPA's interpretation of existing legal requirements as well as non-binding recommendations for EPA permit writers to consider in applying UIC Class II1 regulations to HF when diesel fuels are used in fracturing fluids or propping agents. This document does not address geothermal activities. The EPA expects that EPA UIC Program Directors, and the permit writers acting on their behalf, will follow the interpretation of the statutory term "diesel fuels" presented in this guidance document. They should also consider, although are not required to follow, the recommendations reflected in this guidance on how to apply the Class II regulations to HF activities using diesel fuels when issuing permits for such activities under the federal UIC Program. Recommendations are consistent with the discretion accorded under the existing UIC Class II regulations, and reflect existing UIC requirements for other well classes, voluntary industry standards, state rules, and other model guidelines for HF. However, permit writers, acting on behalf of the UIC Director have the discretion to consider alternative approaches that are consistent with statutory and regulatory requirements. Decisions about permitting HF operations that use diesel fuels will be made on a case-by-case basis, considering the facts and circumstances of the specific injection activity and applicable statutes, regulations and case law. Under the 2005 amendments to the SDWA, a UIC Class II permit must be obtained prior to conducting the underground injection of diesel fuels for hydraulic fracturing. The EPA, where it directly implements the program, as well as states and tribes with primary enforcement authority, must issue a Class II permit prior to the injection of diesel fuels in the HF fluid or propping agents. The primary audience for these technical recommendations is the EPA Regional offices directly implementing the existing UIC Class II Program requirements (40 Code of Federal Regulations (CFR) parts 124 and 144 through 147). Stakeholders and the public have recognized the importance of safely and responsibly managing unconventional oil and gas development, including hydraulic fracturing. Many states have updated their oil and gas regulations and a variety of organizations have developed model guidelines and best practices. The EPA engaged with states, tribes, industry, and other stakeholders during the development of this document and reviewed best practices available at the time. The EPA used information from these efforts to inform this guidance for the UIC program.
Download or read book Permitting Guidance for Oil and Gas Hydraulic Fracturing Activities Using Diesel Fuels written by U. S. Environmental U.S. Environmental Protection Agency and published by CreateSpace. This book was released on 2015-03-15 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance provides technical recommendations for protecting underground sources of drinking water (USDWs) from potential endangerment posed by hydraulic fracturing (HF) activities where diesel fuels are used. The U.S. Environmental Protection Agency (EPA) developed this guidance for EPA permit writers to ensure protection of USDWs in accordance with the Safe Drinking Water Act (SDWA) and Underground Injection Control (UIC) regulatory authority. This authority is limited to when diesel fuels are used in fluids or propping agents pursuant to oil, gas and geothermal activities. This document does not establish any new permitting requirements for HF activities using diesel fuels, but describes the EPA's interpretation of existing legal requirements as well as non-binding recommendations for EPA permit writers to consider in applying UIC Class II1 regulations to HF when diesel fuels are used in fracturing fluids or propping agents. This document does not address geothermal activities. The EPA expects that EPA UIC Program Directors, and the permit writers acting on their behalf, will follow the interpretation of the statutory term "diesel fuels" presented in this guidance document. They should also consider, although are not required to follow, the recommendations reflected in this guidance on how to apply the Class II regulations to HF activities using diesel fuels when issuing permits for such activities under the federal UIC Program. Recommendations are consistent with the discretion accorded under the existing UIC Class II regulations, and reflect existing UIC requirements for other well classes, voluntary industry standards, state rules, and other model guidelines for HF. However, permit writers, acting on behalf of the UIC Director have the discretion to consider alternative approaches that are consistent with statutory and regulatory requirements. Decisions about permitting HF operations that use diesel fuels will be made on a case-by-case basis, considering the facts and circumstances of the specific injection activity and applicable statutes, regulations and case law. Under the 2005 amendments to the SDWA, a UIC Class II permit must be obtained prior to conducting the underground injection of diesel fuels for hydraulic fracturing. The EPA, where it directly implements the program, as well as states and tribes with primary enforcement authority, must issue a Class II permit prior to the injection of diesel fuels in the HF fluid or propping agents. The primary audience for these technical recommendations is the EPA Regional offices directly implementing the existing UIC Class II Program requirements (40 Code of Federal Regulations (CFR) parts 124 and 144 through 147). Stakeholders and the public have recognized the importance of safely and responsibly managing unconventional oil and gas development, including hydraulic fracturing. Many states have updated their oil and gas regulations and a variety of organizations have developed model guidelines and best practices. The EPA engaged with states, tribes, industry, and other stakeholders during the development of this document and reviewed best practices available at the time. The EPA used information from these efforts to inform this guidance for the UIC program.
Download or read book Fracking Environmental Protection and Development of Unconventional Oil and Gas Resources written by James Jacobs and published by McGraw-Hill Education. This book was released on 2016-06-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the technology, science, safety, and environmental assessment and cleanup related to hydraulic fracturing for oil and gas resources Fracking: Environmental Protection and Development of Unconventional Oil and Gas Resources focuses on hydraulic fracturing related to oil and gas drilling, spills and leaks, and environmental impacts, and the side-effects or unintended consequences of resource extraction. The book starts with the history of oil and gas drilling associated with hydraulic fracturing and explains the geologic and technical issues of fracking of tight formation. This practical guide also describes the geology of petroleum hydrocarbon resources, as well as the methods of verification for environmentally safe resource extraction. Numerous case studies from the U.S. EPA and other agencies and universities are featured, showing safe and appropriate resource extraction, as well as verified case studies where water resources have been impacted by drilling and production activities. This important and timely book concludes with a variety of background soil, vapor, and groundwater sampling methods to minimize impacts and provide data to lower the chances of future environmental damage and litigation. Monitoring and sampling programs during and after drilling and production activities are explained, and cost recovery methods are described for when environmental damages occur. Provides a better understanding of the controversy related to hydraulic fracturing Covers hydraulic fracturing technologies, and the geology and chemistry of tight shale and sandstone resources Features numerous case studies by the U.S. EPA and other agencies Evaluates planning and sampling methods of minimizing environmental impacts Explains remediation methods if environmental impacts are confirmed Includes cost recovery techniques and data requirements for impacts from hydraulic fracturing
Download or read book Review of Federal Hydraulic Fracturing Research Activities written by United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Energy and published by . This book was released on 2013 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Regulation of Shale Gas Development Including Hydraulic Fracturing written by Hannah Jacobs Wiseman and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides one of the first detailed surveys of current oil and gas and hydraulic fracturing (also called fracing, fracking, or hydrofracking) regulation. It identifies and compares the environmental laws and regulations that apply to most stages of the oil or gas development process in shales and tight sands, from conducting seismic testing to constructing a well pad, drilling, withdrawing water, completing a hydraulic fracture treatment, and storing and disposing of waste. It briefly describes municipal ordinances and federal regulations, including recently-announced EPA regulatory efforts, but focuses primarily on the states, comparing regulations in sixteen states. The paper's comparison tables show that state regulations in some areas vary substantially, and the paper attempts to connect the potential risks of oil and gas development from shales and tight sands -- which are addressed in another Energy Institute paper by Professor Ian Duncan -- to the regulation. The paper concludes that states should modify certain regulations to address these risks. Some states do not require specific types of blowout prevention, for example, offering only a narrative standard, yet well blowouts are an important concern at the drilling and fracturing stage. States also should update their casing and cementing regulations to protect well integrity during drilling and fracturing and ensure long-term well integrity, and they should require the testing of water around proposed wells before site construction begins. Ideally, states also would consider implementing a presumption of oil and gas operator liability for water well contamination, as Pennsylvania and West Virginia have done. For risks at the well surface, states should update spill prevention requirements at well sites and consider whether federal Department of Transportation regulations addressing the movement of fracturing chemicals adequately protect against spills. States also must explore better options for disposing of large quantities of new wastes and regulating the withdrawal of large volumes of water for fracturing to prevent adverse impacts to streams and overuse of underground sources of water. Further, states and the federal government must enhance air quality monitoring around sites and consider additional controls. Finally, the collection of more and better data, including information from baseline and post-production water testing, is essential. With states at the regulatory helm, comparison of public law strategies to address development risks can produce fruitful cross-jurisdictional lessons. The Energy Institute at the University of Texas funded the research for this paper.
Download or read book Hydraulic Fracturing Impacts and Technologies written by Venki Uddameri and published by CRC Press. This book was released on 2015-06-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing Impacts and Technologies: A Multidisciplinary Perspective serves as an introduction to hydraulic fracturing and provides balanced coverage of its benefits and potential negative effects. Presenting a holistic assessment of hydraulic fracturing and its environmental impacts, this book chronicles the history and development of un
Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.
Download or read book Hydraulic Fracturing for Oil and Gas written by United States Environmental Agency and published by Createspace Independent Publishing Platform. This book was released on 2017-06-08 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This final report provides a review and synthesis of available scientific information concerning the relationship between hydraulic fracturing activities and drinking water resources in the United States. The report is organized around activities in the hydraulic fracturing water cycle and their potential to impact drinking water resources. The stages include: (1) acquiring water to be used for hydraulic fracturing (Water Acquisition), (2) mixing the water with chemical additives to prepare hydraulic fracturing fluids (Chemical Mixing), (3) injecting the hydraulic fracturing fluids into the production well to create fractures in the targeted production zone (Well Injection), (4) collecting the wastewater that returns through the well after injection (Produced Water Handling), and (5) managing the wastewater via disposal or reuse methods (Wastewater Disposal and Reuse). EPA found scientific evidence that hydraulic fracturing activities can impact drinking water resources under some circumstances. The report identifies certain conditions under which impacts from hydraulic fracturing activities can be more frequent or severe."-- Source other than Library of Congress.
Download or read book Oil and Gas written by United States. Government Accountability Office and published by . This book was released on 2012 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: New applications of horizontal drilling techniques and hydraulic fracturing, in which water, sand, and chemical additives are injected under high pressure to create and maintain fractures in underground formations, allow oil and natural gas from shale formations (known as 'shale oil' and 'shale gas') to be developed. As exploration and development of shale oil and gas have increased, including in areas of the country without a history of oil and natural gas development, questions have been raised about the estimates of the size of these resources, as well as the processes used to extract them. GAO was asked to determine what is known about the (1) size of shale oil and gas resources and the amount produced from 2007 through 2011 and (2) environmental and public health risks associated with the development of shale oil and gas. GAO reviewed estimates and data from federal and nongovernmental organizations on the size and production of shale oil and gas resources. GAO also interviewed federal and state regulatory officials, representatives from industry and environmental organizations, oil and gas operators, and researchers from academic institutions. GAO is not making any recommendations in this report. We provided a draft of this report to the Department of Energy, the Department of the Interior, and the Environmental Protection Agency for review. The Department of the Interior and the Environmental Protection Agency provided technical comments, which we incorporated as appropriate. The Department of Energy did not provide comments.
