Download or read book Stable Free Radical Polymerization Conducted In Emulsion Polymerization Systems written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Free radical polymerization is the most common polymerization technique that is used for the manufacturing of polymers, due to the ease of the polymerization initiation, wide latitude of the material design for a large variety of monomers, and the excellent process robustness for commercial production. In the 1990's, research activities for the precise control of radical polymerization process resulted in the discovery of 'Living Radical Polymerization'. The discoveries opened the door for the next generation of radical polymerizations. Extensive research has been conducted to understand the mechanisms and kinetics for numerous practical applications, particularly for polymerization in bulk and solution systems. However, despite the interest of industry, the mechanistic understanding in aqueous dispersed systems such as emulsion and miniemulsion polymerization is far behind the aforementioned two systems. There are still major challenges from the production viewpoint. One reason for the poor understanding is the complexity of the heterogeneous system, which includes multiple reaction phases that are accompanied by the segregation and transfer of the reaction species among different phases. The purpose of this research was to investigate living radical polymerization or "Stable Free Radical Polymerization" (SFRP) in aqueous dispersed systems to obtain better mechanistic understanding of how the heterogeneous nature of the system interacts with the novel living radical chemistry. The theoretical and experimental feasibility of the SFRP emulsion process were studied in this research, in particular, focusing on the compartmentalization effect. Particle size influence on the polymerization kinetics and the polymer livingness was experimentally confirmed, and compared to bulk polymerization. In addition, a comprehensive mathematical model including all major chemical and physical events was developed to further our mechanistic understanding. Based on the results from the.
Download or read book Emulsion based Free Radical Retrograde Precipitation Polymerization written by Gerard Caneba and published by Springer Science & Business Media. This book was released on 2011-07-02 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is a follow-up material to the first FRRPP book by Gerard Caneba in 2009. It includes additional conceptual results, implementation of the FRRPP process in emulsion media to produce various block copolymers, and other FRRPP-related supplementary topics. Conceptual topics include the application of the quantitative analysis presented in the first FRRPP monograph for the occurrence of the FRRPP process to the polysterene-styrene-ether (PS-S-Ether) and poly(methacrylic acid)-methacrylic acid-water (PMAA-MAA-Water) systems, as well as extensions through unsteady state analysis of the occurrence of flat temperature profiles. Also, the generalization of the quantitative analysis is done to consider molecular weight effects, especially based on changes of the phase envelope to an hourglass type. Topics in implementation of the FRRPP process from pre-emulsions of monomers and the solvent/precipitant are highlighted. Additional FRRPP topics are included in this monograph that pertain to more recent efforts of Gerard Caneba, such as oil spill control, oil dispersant system, and caustic sludge remediation from emulsion-based FRRPP materials, hydrolysis of vinyl acetate-acrylic acid-based copolymers, and other polymer modification studies from FRRPP-based emulsions.
Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.
Download or read book The Development and Fundamental Studies of a Unique Living radical Emulsion Polymerization Process written by Andrea R. Szkurhan and published by . This book was released on 2006 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerization is one of the most widely used industrial processes for the synthesis of polymers by free radical polymerization. The prospect of performing living-radical polymerizations under emulsion conditions has been long awaited since it will allow the production of living polymers in an environmentally friendly and industrially compatible process. The extension of living-radical polymerization to emulsion has been met with a lot of problems. It is very difficult to maintain stable emulsions, ultimately leading to reactions that result in emulsion failure (latex instability, phase separation, and the formation of large particles). The following thesis outlines attempts at performing stable free radical polymerization (SFRP) under emulsion conditions. Initial work was performed under ab initio SFRP emulsion conditions in which various factors were altered in attempts to obtain colloidally stable latexes. Although the polymers produced from these emulsions were living, the reactions consistently resulted in emulsion failure, producing latexes that phase separated into a foamy layer on top of a milky layer, or an emulsion containing large particles that settled to the bottom of the reaction mixture after the emulsion was left to stand for a few minutes. The failures resulting from this work led to the development of the nanoprecipitation emulsion process, in which an acetone solution of a low molecular weight TEMPO-terminated polystyrene was precipitated into an aqueous solution of poly(vinyl alcohol) to enable the formation of emulsion particles which were swollen with monomer and subsequently polymerized. The polymerizations behave in a living manner and produce colloidally stable emulsion latexes. The nanoprecipitation technique was successfully extended to the reversible-addition fragmentation chain transfer (RAFT) polymerization process to demonstrate the generality of this process.
Download or read book Living controlled Radical Polymerization written by Delphine Chan-Seng and published by . This book was released on 2007 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerization is an important process for the industrial production of polymers. However, initial attempts at performing "living"/controlled radical polymerization under emulsion conditions were not particularly successful primarily due to latex instability. To address this problem a unique nanoprecipitation process was developed in our laboratory for the stable free radical polymerization (SFRP) process. The first part of this thesis describes attempts to generalize this process and extend it to the copper based atom transfer radical polymerization, ATRP, process. Details describing initial problems we had with reproducing some initial successful results are provided. Once the process was under control it was used to synthesize block copolymers. The ability of these block copolymers to self-assemble in aqueous solutions and in bulk were subsequently investigated and the results of these studies are detailed at the end of the discussion on the emulsion process. The second part of the thesis deals with the SFRP process and more specifically with the difficulty of the process to moderate the polymerization of acrylates. Two reasons have been advanced to account for this difficulty; a high bond dissociation energy between the C-O bond linking the nitroxide moiety to the end of the polymer chain and an accumulation of excess nitroxide, caused by unavoidable chain termination, which causes inhibition of the polymerization. To address the high bond dissociation energy a nitroxide, specifically, 1,1'-diadamantyl nitroxide, containing very bulky substituents that might cause the bond to weaken, was synthesized and studied. To address the accumulation of excess free nitroxide, high temperature additives, that would slowly dissociate over time and consume the excess nitroxides, were studied. The results of both of these approaches are provided enabling some insight into what might be actually restricting the polymerization of acrylates.
Download or read book Principles and Applications of Emulsion Polymerization written by Chorng-Shyan Chern and published by John Wiley & Sons. This book was released on 2008-10-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of methods of emulsion polymerization This book provides a comprehensive reference on emulsion polymerization methods,focusing on the fundamental mechanisms and kinetics of each process, as well as howthey can be applied to the manufacture of environmentally friendly polymeric materials. Topics covered include: Conventional emulsion polymerization Miniemulsion polymerization Microemulsion polymerization Industrial emulsion polymerization processes (primarily the semibatch and continuous reactions systems) The role of various colloidal phenomena in emulsion polymerization Important end-use properties of emulsion polymer (latex) products Information on industrial applications in paints, coatings, adhesives, paper and board, and more This is a hands-on reference for graduate students and professionals in polymerchemistry, chemical engineering, and materials science who are involved in researchon coatings, adhesives, rubber, latex, paints, finishes, and other materials that can becreated using various methods of emulsion polymerization.
Download or read book Radical Polymerization written by Michael Buback and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC-sponsored International Symposium on "Radical Polymerization: Kinetics and Mechanism" was held in Il Ciocco (Italia) during the week September 3-8, 2006. It was the fourth within the series of so-called SML conferences, which are the major scientific forum for addressing kinetic and mechanistic aspects of free-radical polymerization and of ontrolled radical polymerization. Top international authors like K. Matyjaszewski, T. P. Davis, T. Fukuda and others present their latest research. The five major themes covered were: Fundamentals of Free-Radical Polymerization, Heterogeneous Polymerization, Controlled Radical Polymerization, Polymer Reaction Engineering, and Polymer Characterization. SML IV again marked an important step forward toward the better understanding of the kinetics and mechanism of radical polymerization, which is extremely relevant for both conventional and controlled radical polymerization and for people in academia as well as in industry.
Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2013-07-29 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and Technology of Emulsion Polymerisation 2e provides a practical and intuitive explanation of emulsion polymerization, in combination with both conventional and controlled radical polymerization. For those working in industry, coupling theory with everyday practice can be difficult. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, the book explains how the principles relate to practical application. The second edition of this book includes a new chapter on morphology of latex particles, a rapidly progressing area where modelling the thermodynamic and kinetic aspects of phase separation and morphology has developed into a mature and powerful tool to predict and control morphology of latex particles. Another area that is rapidly progressing is the application of controlled radical polymerisation in emulsion polymerization. Controlled radical polymerisation is used in aiding encapsulation of inorganic particles like pigment particles and clay platelets. These latest developments are included in the second edition.
Download or read book Living controlled Polymerization Conducted in Aqueous Based Systems written by Ryan W. Simms and published by . This book was released on 2007 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade processes known as living/controlled radical polymerizations (L/CRP) have been developed which permit the synthesis of high-value specialty polymers. Currently, the three processes that have demonstrated the most potential are: reverse addition fragmentation chain transfer polymerization (RAFT), atom transfer radical polymerization (ATRP) and stable free radical polymerization (SFRP). While each process has their strengths and weaknesses with regard to specific polymers and architecture, the viability of these systems to industrial scale production all lie in the ability to perform the polymerization in a water based system because of process, environmental and economic advantages. The most effective method of controlling the polymerization of vinyl acetate in bulk has been RAFT. We have developed a miniemulsion RAFT polymerization using the xanthate methyl (ethoxycarbonothioyl)sulfanyl acetate. The miniemulsion is stabilized with 3 wt% sodium lauryl sulfate, initiated with the azo-based water-soluble VA-060. The main focus of this research was adapting ATRP to a miniemulsion system. It was determined that ionic surfactants can be successfully employed in emulsion-based ATRP. The cationic surfactant cetyltrimethylammonium bromide provides excellent stability of the latex over a range of surfactant loadings (allowing the particle size to be easily manipulated), at temperatures up to 90 C, for a wide variety of ATRP formulations. A new method of initiation was developed for reverse ATRP, using the redox pair hydrogen peroxide/ascorbic acid. This nearly eliminated the induction period at the start of the polymerization, increased the polymerization rate 5 fold and, surprisingly, enabled the formation of well-controlled polymers with a number-average molecular (Mn) weight approaching 1 million (typically ATRP is limited to ~200 000). The ability to control the particle size and the number of polymer chains (through the target Mn) over a wide range of values allowed us to determine that ATRP is influenced by compartmentalization effects. The knowledge gained from our work in L/CRP was used to develop the surfactant-free SFRP of styrene. A multi-stage approach was adopted starting from dilute styrene/water solutions to favor the formation of the alkoxyamine and short chain SG1-oligomers (stage one) before the addition of the majority of the styrene (stage two).
Download or read book Emulsion Polymerization and Its Applications in Industry written by V. I. Eliseeva and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a large body of Soviet work on emulsion polymerization, spanning a period of over three decades, that has been published primarily in the Russian language. Most of this has remained untranslated into English and hence un available to most other scientists. The value of this book lies primarily in the fact that it brings together the most important of these Soviet contributions, along with comment and analysis by the authors, who may be considered among the foremost authorities in this field in the Soviet Union. But the hundreds of literature citations go far beyond the borders of the Soviet Union and serve as an excellent bibliography of the world literature on emulsion polymerization up to the time this book was written. The book covers both fundamental and applied aspects. In the former are included discussions of particle formation mechanisms, a comprehensive theory of emulsion polymerization, copolymerization of polar monomers, and particle morphology and its implications with regard to derived film properties. Among the applied aspects are discussions of continuous emulsion polymerization, both tubular reactors and continuous stirred tank cascades, and various aspects con cerning the manufacture of some of the most important monomers, such as styrene, butadiene, vinyl acetate, methyl methacrylate, acrylonitrile, and chloroprene. This book will be an indispensable reference source for scientists who are entering the field as well as those who are experienced and who have wanted a ready access to this large body of literature.
Download or read book Emulsion based Free Radical Retrograde Precipitation Polymerization written by Gerard Caneba and published by Springer. This book was released on 2011-07-08 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is a follow-up material to the first FRRPP book by Gerard Caneba in 2009. It includes additional conceptual results, implementation of the FRRPP process in emulsion media to produce various block copolymers, and other FRRPP-related supplementary topics. Conceptual topics include the application of the quantitative analysis presented in the first FRRPP monograph for the occurrence of the FRRPP process to the polysterene-styrene-ether (PS-S-Ether) and poly(methacrylic acid)-methacrylic acid-water (PMAA-MAA-Water) systems, as well as extensions through unsteady state analysis of the occurrence of flat temperature profiles. Also, the generalization of the quantitative analysis is done to consider molecular weight effects, especially based on changes of the phase envelope to an hourglass type. Topics in implementation of the FRRPP process from pre-emulsions of monomers and the solvent/precipitant are highlighted. Additional FRRPP topics are included in this monograph that pertain to more recent efforts of Gerard Caneba, such as oil spill control, oil dispersant system, and caustic sludge remediation from emulsion-based FRRPP materials, hydrolysis of vinyl acetate-acrylic acid-based copolymers, and other polymer modification studies from FRRPP-based emulsions.
Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerisation produces high value polymers in a low cost, environmentally friendly process. The drive to develop environmentally benign production methods for polymers has resulted in widespread development and implementation of the emulsion polymerisation technique. In addition, when combined with novel polymerisation mechanisms the process can give rise to a range of polymer products with particularly useful properties. Emulsion polymerisation is a complex process, governed by the interplay of both chemical and physical properties including polymerisation kinetics and dispersion stability. Successful industrial application relies on understanding and controlling those properties. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, Chemistry and Technology of Emulsion Polymerisation provides a practical and intuitive explanation of emulsion polymerisation. In the development of industrial processes, coupling that understanding with everyday practice can be a further difficult step, so the book emphasises a clear, comprehensive and straightforward discussion to illustrate how the principles relate to practical application. Written for research chemists, technologists and engineers in the polymer, fine and specialty chemicals industries, and in university or government laboratories, this book will be particularly valuable to those early on in their careers. The comprehensive and straightforward coverage will also ensure it is an important resource for advanced courses in emulsion polymerisation.
Download or read book Emulsion Polymerization of Vinyl Acetate written by Mohamed S. El-Aasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is particularly appropriate that this symposium on the emulsion polymeriza tion of vinyl acetate was held in recognition of the industrial importance of poly(vinyl acetate) and vinyl acetate copolymers, and their rather unique properties among emulsion polymers in general. Poly( vinyl acetate) latexes were the first synthetic polymer latexes to be made on a commercial scale: their production using polyvinyl alcohol as emulsifier began in Germany during the mid-1930s and has continued to the present day, growing steadily with the years. Indeed, poly(vinyl acetate) latexes prepared with polyvinyl alcohol are still one of the mainstays of the adhesives industry. With the passing of time, however, vinyl acetate copolymers have been developed: copolymers with maleate esters such as dibutyl maleate, acrylate esters such as ethyl acrylate and butyl acrylate, versatic acid esters, and, more recently, ethylene. These versatile copolymers have found increasing use in more sophisticated adhesives with specialized properties, adhesives for clay coatings on paper, carpet backing, and interior and exterior paints. Thus more than 45 years after the first commercial production of vinyl acetate latexes, their use is still growing, both in actual quantities and different applications. The industrial importance of vinyl acetate latexes makes the mechanism and kinetics of their emulsion polymerization of practical as well as scientific interest.
Download or read book Dispersed Systems written by and published by Steinkopff. This book was released on 2014-03-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research and Development Studies Into the Basic Technology of Radiation Induced Emulsion Polymerization Including Small Scale Pilot Plant Systems written by V. T. Stannett and published by . This book was released on 1971 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Nanocomposites by Emulsion and Suspension Polymerization written by Vikas Mittal and published by Royal Society of Chemistry. This book was released on 2010-09-30 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites revolutionized research in the composites area by achieving the nanoscale dispersion of the inorganic filler (clay platelets) in the polymer matrices after suitable surface modifications of the filler phase. A large number of polymer matrices were tried and nanocomposites with varying degrees of successes were achieved with these polymer systems. The majority of the synthesis are carried out by melt blending which frequently result in the full exfoliation of the filler. However, advanced techniques provide a number of advantages as compared to the melt blending and lead to more uniform composites with enhanced properties. There are a number of recent advances in these methods such as the use of reactive surfactants, modified initiators, advanced clay surface modifications, use of a variety of fillers, inverse polymerization, and miniemulsion polymerization methods which have further led the generation of advanced exfoliated nanocomposites. Until now, most of the published research has been scattered throughout the literature. This book provides a single comprehensive source of information about one of the most important facets of polymer nanocomposites technology: synthesis in emulsion and suspension. These polymerization methods lead to the generation of the well delaminated polymer nanocomposites with a wide range of polymer matrices. This book serves as both a professional reference for experienced researchers and a valuable text for newcomers to the field. It makes the reader aware of the potential commercial use of these recent developments.
Download or read book Emulsion Polymerization and Emulsion Polymers written by Peter A. Lovell and published by John Wiley & Sons. This book was released on 1997-04-03 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion Polymerization and Emulsion Polymers Edited by Peter A. Lovell Manchester Materials Science Centre, UMIST, Manchester, UK and Mohamed S. El-Aasser Emulsion Polymers Institute and Department of Chemical Engineering, Lehigh University, Bethlehem, PA, USA Emulsion polymerization is a technologically and commercially important reaction used to produce synthetic polymers and latexes for a wide range of applications. It is the basis of a massive global industry that is expanding due to the versatility of the reaction and the greater realization of the ability to control properties of the polymer latexes produced. Emulsion Polymerization and Emulsion Polymers provides an up-to-date treatment of both academic and industrial aspects of the subject in a single self-contained volume. Established knowledge is integrated with latest developments and introductory chapters to give a state-of-the-art summary which is also suitable as a broad based introduction to the field. The individual chapters have been written by specialists from academia and industry and are presented in a way which ensures that the book will be of equal value to experienced researchers and students.
