Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.

Download or read book Single phase Two phase and Supercritical Natural Circulation Systems written by Pallippattu Krishnan Vijayan and published by Woodhead Publishing. This book was released on 2019-06-19 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-Phase, Two-Phase and Supercritical Natural Circulation Systems provides readers with a deep understanding of natural circulation systems. This book equips the reader with an understanding on how to detect unstable loops to ensure plant safety and reliability, calculate heat transport capabilities, and design effective natural circulation loops, stability maps and parallel channel systems. Each chapter begins with an introduction to the circulation system before discussing each element in detail and analyzing its effect on the performance of the system. The book also presents thermosyphon heat transport devices in nuclear and other industrial plants, a common information need for students and researchers alike. This book is invaluable for engineers, designers, operators and consultants in nuclear, mechanical, electrical and chemical disciplines. - Presents single-phase, two-phase and supercritical natural circulation systems together in one resource to fill an existing knowledge gap - Guides the reader through relevant processes, such as designing, analyzing and generating stability maps and natural circulation loops, calculating heat transport capabilities, and maintaining natural circulation system operations - Includes global case studies and examples to increase understanding, along with important IAEA standards and procedures

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa

Download or read book Two Fluid Model Stability Simulation and Chaos written by Martín López de Bertodano and published by Springer. This book was released on 2016-11-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the linear and nonlinear two-phase stability of the one-dimensional Two-Fluid Model (TFM) material waves and the numerical methods used to solve it. The TFM fluid dynamic stability is a problem that remains open since its inception more than forty years ago. The difficulty is formidable because it involves the combined challenges of two-phase topological structure and turbulence, both nonlinear phenomena. The one dimensional approach permits the separation of the former from the latter.The authors first analyze the kinematic and Kelvin-Helmholtz instabilities with the simplified one-dimensional Fixed-Flux Model (FFM). They then analyze the density wave instability with the well-known Drift-Flux Model. They demonstrate that the Fixed-Flux and Drift-Flux assumptions are two complementary TFM simplifications that address two-phase local and global linear instabilities separately. Furthermore, they demonstrate with a well-posed FFM and a DFM two cases of nonlinear two-phase behavior that are chaotic and Lyapunov stable. On the practical side, they also assess the regularization of an ill-posed one-dimensional TFM industrial code. Furthermore, the one-dimensional stability analyses are applied to obtain well-posed CFD TFMs that are either stable (RANS) or Lyapunov stable (URANS), with the focus on numerical convergence.

Download or read book Linear and Non linear Stability Analysis in Boiling Water Reactors written by Alfonso Prieto Guerrero and published by Woodhead Publishing. This book was released on 2018-10-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear and Non-Linear Stability Analysis in Boiling Water Reactors: The Design of Real-Time Stability Monitors presents a thorough analysis of the most innovative BWR reactors and stability phenomena in one accessible resource. The book presents a summary of existing literature on BWRs to give early career engineers and researchers a solid background in the field, as well as the latest research on stability phenomena (propagation phenomena in BWRs), nuclear power monitors, and advanced computer systems used to for the prediction of stability. It also emphasizes the importance of BWR technology and embedded neutron monitoring systems (APRMs and LPRMs), and introduces non-linear stability parameters that can be used for the onset detection of instabilities in BWRs. Additionally, the book details the scope, advantages, and disadvantages of multiple advanced linear and non linear signal processing methods, and includes analytical case studies of existing plants. This combination makes Linear and Non-Linear Stability Analysis in Boiling Water Reactors a valuable resource for nuclear engineering students focusing on linear and non-linear analysis, as well as for those working and researching in a nuclear power capacity looking to implement stability methods and estimate decay ratios using non-linear techniques. - Explores the nuclear stability of Boiling Water Reactors based on linear and non-linear models - Evaluates linear signal processing methods such as autoregressive models, Fourier-based methods, and wavelets to calculate decay ratios - Proposes novel non-linear signal analysis techniques linked to non-linear stability indicators - Includes case studies of various existing nuclear power plants as well as mathematical models and simulations

Download or read book Heat Transfer in Condensation and Boiling written by Karl Stephan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.

Download or read book Two Phase Flow Phase Change and Numerical Modeling written by Amimul Ahsan and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.

Download or read book Nuclear Safety written by and published by . This book was released on 1992 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boiling Heat Transfer And Two Phase Flow written by L S Tong and published by Routledge. This book was released on 2018-05-04 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, this graduate text describes the current state of boiling heat transfer and two-phase flow, in terms through which students can attain a consistent understanding. Prediction of real or potential boiling heat transfer behaviour, both in steady and transient states, is covered to aid engineering design of reliable and effective systems.

Download or read book Advances in Two Phase Flow and Heat Transfer written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, two-phase flow and heat transfer problems associated with two-phase phenomena have been a challenge to many investigators. Two-phase flow applications are found in a wide range of engineering systems, such as nuclear and conventional power plants, evaporators of refrigeration systems and a wide vari ety of evaporative and condensive heat exchangers in the chemical industry. This publication is based on the invited lectures presented at the NATO Advanced Research Workshop on the Advances in Two-Phase Flow and Heat Transfer. The Horkshop was attended by more than 50 leading scientists and practicing engineers who work actively on two-phase flow and heat transfer research and applications in dif ferent sectors (academia, government, industry) of member countries of NATO. Some scientific leaders and experts on the subject matter from the non-NATO countries were also invited. They convened to discuss the state-of-the-art in two-phase flow and heat transfer and formulated recommendations for future research directions. To achieve these goals, invited key papers and a limited number of contributions were presented and discussed. The specific aspects of the subject were treated in depth in the panel sessions, and the unresolved problems identified. Suitable as a practical reference, these volumes incorporate a systematic approach to two-phase flow analysis.

Download or read book Multiphase Flow Dynamics 5 written by Nikolay Ivanov Kolev and published by Springer. This book was released on 2015-04-02 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume 5 of the successful book package "Multiphase Flow Dynamics" is devoted to nuclear thermal hydraulics which is a substantial part of nuclear reactor safety. It provides knowledge and mathematical tools for adequate description of the process of transferring the fission heat released in materials due to nuclear reactions into its environment. It step by step introduces into the heat release inside the fuel, temperature fields in the fuels, the "simple" boiling flow in a pipe described using ideas of different complexity like equilibrium, non equilibrium, homogeneity, non homogeneity. Then the "simple" three-fluid boiling flow in a pipe is described by gradually involving the mechanisms like entrainment and deposition, dynamic fragmentation, collisions, coalescence, turbulence. All heat transfer mechanisms are introduced gradually discussing their uncertainty. Different techniques are introduced like boundary layer treatments or integral methods. Comparisons with experimental data at each step demonstrate the success of the different ideas and models. After an introduction of the design of the reactor pressure vessels for pressurized and boiling water reactors the accuracy of the modern methods is demonstrated using large number of experimental data sets for steady and transient flows in heated bundles. Starting with single pipe boiling going through boiling in the rod bundles the analysis of complete vessel including the reactor is finally demonstrated. Then a powerful method for nonlinear stability analysis of flow boiling and condensation is introduced. Models are presented and their accuracies are investigated for describing critical multiphase flow at different level of complexity. Therefore the book presents a complete coverage of the modern Nuclear Thermal Hydrodynamics. This present third edition includes various updates, extensions, improvements and corrections.

Download or read book Investigation of Pressure Drop and Dynamic Instabilities in Two phase Flow written by Thomas Lanz and published by Cuvillier Verlag. This book was released on 2020-12-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zweiphasenströmungen, insbesondere Wasser/Dampf-Strömungen, sind für die Auslegung und den Betrieb thermohydraulischer Systeme nach wie vor von großem Interesse. Diese Arbeit befasst sich mit der Untersuchung des Druckverlustes und dynamischer Instabilitäten (hier Dichtewellenoszillationen) in Wasser/Dampf-Strömungen mittels zweier unterschiedlicher Ansätze unter praxisnahen Bedingungen. Zum einen wird ein Versuchsstand entwickelt, aufgebaut und in Betrieb genommen, um mit diesem entsprechende Versuche an einem Verdampferrohr durchzuführen. Zum anderen werden dynamische Simulationen mit einem homogenen („mixture flow“) und einem heterogenen („two-fluid“) Strömungsmodell durchgeführt und miteinander und mit den Messdaten verglichen. Die experimentellen und numerischen Ergebnisse lassen sich schließlich in dimensionslosen Stabilitätskarten zusammenfassen, welche die Betriebsgrenzen beschreiben, bei denen Dichtewellenoszillationen in thermohydraulisch ähnlichen Systemen auftreten können.

Download or read book Coolant Flow Instabilities in Power Equipment written by Vladimir B. Khabensky and published by CRC Press. This book was released on 2012-12-17 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal-hydraulic instability can potentially impair thermal reliability of reactor cores or other power equipment components. Thus it is important to address stability issues in power equipment associated with thermal and nuclear installations, particularly in thermal nuclear power plants, chemical and petroleum industries, space technology, and radio, electronic, and computer cooling systems. Coolant Flow Instabilities in Power Equipment synthesizes results from instability investigations around the world, presenting an analysis and generalization of the published technical literature. The authors include individual examples on flow stability in various types of equipment, including boilers, reactors, steam generators, condensers, heat exchangers, turbines, pumps, deaerators, bubblers, and pipelines. They also present information that has not been widely available until recently, such as thermal-acoustic instability, flow instability with supercritical parameters, and single-phase coolant flow static instability. The material described in this book is derived from vast amounts of experimental data from thermal-physical test facilities and full-scale installations. It is presented in a manner accessible to readers without advanced mathematical backgrounds. Particular attention has been paid to oscillatory (low-frequency and thermal-acoustic) and static thermal-hydraulic coolant flow instability. In addition, the physical mechanism of instability has been considered in detail. This book provides knowledge of the various types of flow instability, the equipment where this instability can manifest, and the ensuing consequences, as well as makes recommendations concerning possible removal or mitigation of these consequences. The authors provide this information as a useful reference for readers to facilitate the enhanced safety of modern power equipment through qualitative evaluation of design and flow parameters and subsequent selection of the optimal means for increasing flow stability.

Download or read book Heat Transfer and Fluid Flow in Nuclear Systems written by Henri Fenech and published by Elsevier. This book was released on 2013-10-22 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer and Fluid in Flow Nuclear Systems discusses topics that bridge the gap between the fundamental principles and the designed practices. The book is comprised of six chapters that cover analysis of the predicting thermal-hydraulics performance of large nuclear reactors and associated heat-exchangers or steam generators of various nuclear systems. Chapter 1 tackles the general considerations on thermal design and performance requirements of nuclear reactor cores. The second chapter deals with pressurized subcooled light water systems, and the third chapter covers boiling water reactor systems. Chapter 4 tackles liquid metal cooled systems, while Chapter 5 discusses helium cooled systems. The last chapter deals with heat-exchangers and steam generators. The book will be of great help to engineers, scientists, and graduate students concerned with thermal and hydraulic problems.

Download or read book Two Phase Flow Heat Exchangers written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-phase flow heat exchangers are vital components of systems for power generation, chemical processing, and thermal environment control. The art and science of the design of such heat exchangers have advanced considerably in recent years. This is due to better understanding of the fundamentals of two-phase flow and heat transfer in simple geometries, greater appreciation of these processes in complex goemetries, and enhanced predictive capability through use of complex computer codes. The subject is clearly of great fundamental and practical importance. The NATO ASIan Thermal-Hydraulic Fundamentals and Design of Two-Phase Flow Heat Exchangers was held in Povoa de Varzim (near Porto), Portugal, July 6-17, 1987. participating in the organization of" the ASI were the Department of Mechanical Engineering and the Clean Energy Research Institute, University of Miami; Universidade do Porto; and the Department of Mechanical Engineering, Aeronautical Eng ineer ing, and Mechanics, Rensselaer Polytechnic Institute. The ASI was arranged primarily as a high-level teaching activity by experts representing both academic and industrial viewpoints. The program included the presentation of invited lectures, a limited number of related technical papers and discussion sessions.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: