Download or read book Stability Bifurcation and Postcritical Behaviour of Elastic Structures written by M. Pignataro and published by Elsevier. This book was released on 2013-10-22 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and systematic analysis of elastic structural stability is presented in this volume. Traditional engineering buckling concepts are discussed in the framework of the Liapunov theory of stability by giving an extensive review of the Koiter approach. The perturbation method for both nonlinear algebraic and differential equations is discussed and adopted as the main tool for postbuckling analysis. The formulation of the buckling problem for the most common engineering structures - rods and frames, plates, shells, and thin-walled beams, is performed and the critical load evaluated for problems of interest. In many cases the postbuckling analysis up to the second order is presented. The use of the Ritz-Galerkin and of the finite element methods is examined as a tool for approximate bifurcation analysis. The volume will provide an up-to-date introduction for non-specialists in elastic stability theory and methods, and is intended for graduate and post-graduate students and researchers interested in nonlinear structural analysis problems. Basic prerequisites are kept to a minimum, a familiarity with elementary algebra and calculus is all that is required of readers to make use of this book.

Download or read book Stability and Bifurcation of Structures written by Angelo Luongo and published by Springer Nature. This book was released on 2023-06-27 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overcomes the separation existing in literature between the static and the dynamic bifurcation worlds. It brings together buckling and post-buckling problems with nonlinear dynamics, the bridge being represented by the perturbation method, i.e., a mathematical tool that allows for solving static and dynamic problems virtually in the same way. The book is organized as follows: Chapter one gives an overview; Chapter two illustrates phenomenological aspect of static and dynamic bifurcations; Chapter three deals with linear stability analysis of dynamical systems; Chapter four and five discuss the general theory and present examples of buckling and post-buckling of elastic structures; Chapter six describes a linearized approach to buckling, usually adopted in the technical literature, in which pre-critical deformations are neglected; Chapters seven to ten, analyze elastic and elasto-plastic buckling of planar systems of beams, thin-walled beams and plate assemblies, respectively; Chapters eleven to thirteen, illustrate dynamic instability phenomena, such as flutter induced by follower forces, aeroelastic bifurcations caused by wind flow, and parametric excitation triggered by pulsating loads. Finally, Chapter fourteen discusses a large gallery of solved problems, concerning topics covered in the book. An Appendix presents the Vlasov theory of open thin-walled beams. The book is devoted to advanced undergraduate and graduate students, as well as engineers and practitioners. The methods illustrated here are immediately applicable to model real problems. The Book Introduces, in a simple way, complex concepts of bifurcation theory, by making use of elementary mathematics Gives a comprehensive overview of bifurcation of linear and nonlinear structures, in static and dynamic fields Contains a chapter in which many problems are solved, either analytically or numerically, and results commented

Download or read book Elementary Stability and Bifurcation Theory written by Gerard Iooss and published by Springer. This book was released on 1997-12-02 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This substantially revised second edition teaches the bifurcation of asymptotic solutions to evolution problems governed by nonlinear differential equations. Written not just for mathematicians, it appeals to the widest audience of learners, including engineers, biologists, chemists, physicists and economists. For this reason, it uses only well-known methods of classical analysis at foundation level, while the applications and examples are specially chosen to be as varied as possible.

Download or read book Stability of Structures written by Z. P. Ba?ant and published by World Scientific. This book was released on 2010 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial element of structural and continuum mechanics, stability theory has limitless applications in civil, mechanical, aerospace, naval and nuclear engineering. This text of unparalleled scope presents a comprehensive exposition of the principles and applications of stability analysis. It has been proven as a text for introductory courses and various advanced courses for graduate students. It is also prized as an exhaustive reference for engineers and researchers. The authors' focus on understanding of the basic principles rather than excessive detailed solutions, and their treatment of each subject proceed from simple examples to general concepts and rigorous formulations. All the results are derived using as simple mathematics as possible. Numerous examples are given and 700 exercise problems help in attaining a firm grasp of this central aspect of solid mechanics. The book is an unabridged republication of the 1991 edition by Oxford University Press and the 2003 edition by Dover, updated with 18 pages of end notes.

Download or read book Elements of Applied Bifurcation Theory written by Yuri Kuznetsov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing readers with a solid basis in dynamical systems theory, as well as explicit procedures for application of general mathematical results to particular problems, the focus here is on efficient numerical implementations of the developed techniques. The book is designed for advanced undergraduates or graduates in applied mathematics, as well as for Ph.D. students and researchers in physics, biology, engineering, and economics who use dynamical systems as model tools in their studies. A moderate mathematical background is assumed, and, whenever possible, only elementary mathematical tools are used. This new edition preserves the structure of the first while updating the context to incorporate recent theoretical developments, in particular new and improved numerical methods for bifurcation analysis.

Download or read book Bifurcation and Buckling in Structures written by Kiyohiro Ikeda and published by CRC Press. This book was released on 2021-12-30 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bifurcation and Buckling in Structures describes the theory and analysis of bifurcation and buckling in structures. Emphasis is placed on a general procedure for solving nonlinear governing equations and an analysis procedure related to the finite-element method. Simple structural examples using trusses, columns, and frames illustrate the principles. Part I presents fundamental issues such as the general mathematical framework for bifurcation and buckling, procedures for the buckling load/mode analyses, and numerical analysis procedures to trace the solution curves and switch to bifurcation solutions. Advanced topics include asymptotic theory of bifurcation and bifurcation theory of symmetric systems. Part II deals with buckling of perfect and imperfect structures. An overview of the member buckling of columns and beams is provided, followed by the buckling analysis of truss and frame structures. The worst and random imperfections are studied as advanced topics. An extensive review of the history of buckling is presented. This text is ideal for advanced undergraduate and graduate students in engineering and applied mathematics. To assist readers, problems are listed at the end of each chapter, and their answers are given at the end of the book. Kiyohiro Ikeda is Professor Emeritus at Tohoku University, Japan. Kazuo Murota is a Project Professor at the Institute of Statistical Mathematics, Japan, as well as Professor Emeritus at the University of Tokyo, Kyoto University, and Tokyo Metropolitan University, Japan.

Download or read book Structural Stability Theory and Practice written by Sukhvarsh Jerath and published by John Wiley & Sons. This book was released on 2020-12-30 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the theory of structural stability and its applications in crucial areas in engineering Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shells combines necessary information on structural stability into a single, comprehensive resource suitable for practicing engineers and students alike. Written in both US and SI units, this invaluable guide is perfect for readers within and outside of the US. Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell offers: Detailed and patiently developed mathematical derivations and thorough explanations Energy methods that are incorporated throughout the chapters Connections between theory, design specifications and solutions The latest codes and standards from the American Institute of Steel Construction (AISC), Canadian Standards Association (CSA), Australian Standards (SAA), Structural Stability Research Council (SSRC), and Eurocode 3 Solved and unsolved practice-oriented problems in every chapter, with a solutions manual for unsolved problems included for instructors Ideal for practicing professionals in civil, mechanical, and aerospace engineering, as well as upper-level undergraduates and graduate students in structural engineering courses, Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell provides readers with detailed mathematical derivations along with thorough explanations and practical examples.

Download or read book Bifurcation and Stability of Dissipative Systems written by Q.S. Nguyen and published by Springer. This book was released on 2014-05-04 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first theme concerns the plastic buckling of structures in the spirit of Hill’s classical approach. Non-bifurcation and stability criteria are introduced and post-bifurcation analysis performed by asymptotic development method in relation with Hutchinson’s work. Some recent results on the generalized standard model are given and their connection to Hill’s general formulation is presented. Instability phenomena of inelastic flow processes such as strain localization and necking are discussed. The second theme concerns stability and bifurcation problems in internally damaged or cracked colids. In brittle fracture or brittle damage, the evolution law of crack lengths or damage parameters is time-independent like in plasticity and leads to a similar mathematical description of the quasi-static evolution. Stability and non-bifurcation criteria in the sense of Hill can be again obtained from the discussion of the rate response.

Download or read book Stability and Optimization of Structures written by Makoto Ohsaki and published by Springer Science & Business Media. This book was released on 2007-06-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the optimization of a geometrically-nonlinear structure under stability constraint. It presents a deep insight into optimization-based and computer-assisted stability design of discrete structures. Coverage combines design sensitivity analysis developed in structural optimization and imperfection-sensitivity analysis developed in stability analysis.

Download or read book Structural Stability And Morphogenesis written by Rene Thom and published by CRC Press. This book was released on 2018-03-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2018. Routledge is an imprint of Taylor & Francis, an Informa company.

Download or read book Stability of Structures written by Chai H Yoo and published by Elsevier. This book was released on 2011-05-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current trend of building more streamlined structures has made stability analysis a subject of extreme importance. It is mostly a safety issue because Stability loss could result in an unimaginable catastrophe. Written by two authors with a combined 80 years of professional and academic experience, the objective of Stability of Structures: Principles and Applications is to provide engineers and architects with a firm grasp of the fundamentals and principles that are essential to performing effective stability analysts. Concise and readable, this guide presents stability analysis within the context of elementary nonlinear flexural analysis, providing a strong foundation for incorporating theory into everyday practice. The first chapter introduces the buckling of columns. It begins with the linear elastic theory and proceeds to include the effects of large deformations and inelastic behavior. In Chapter 2 various approximate methods are illustrated along with the fundamentals of energy methods. The chapter concludes by introducing several special topics, some advanced, that are useful in understanding the physical resistance mechanisms and consistent and rigorous mathematical analysis. Chapters 3 and 4 cover buckling of beam-columns. Chapter 5 presents torsion in structures in some detail, which is one of the least well understood subjects in the entire spectrum of structural mechanics. Strictly speaking, torsion itself does not belong to a topic in structural stability, but needs to be covered to some extent for a better understanding of buckling accompanied with torsional behavior. Chapters 6 and 7 consider stability of framed structures in conjunction with torsional behavior of structures. Chapters 8 to 10 consider buckling of plate elements, cylindrical shells, and general shells. Although the book is primarily devoted to analysis, rudimentary design aspects are discussed. - Balanced presentation for both theory and practice - Well-blended contents covering elementary to advanced topics - Detailed presentation of the development

Download or read book Bifurcation Theory of Functional Differential Equations written by Shangjiang Guo and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a crash course on various methods from the bifurcation theory of Functional Differential Equations (FDEs). FDEs arise very naturally in economics, life sciences and engineering and the study of FDEs has been a major source of inspiration for advancement in nonlinear analysis and infinite dimensional dynamical systems. The book summarizes some practical and general approaches and frameworks for the investigation of bifurcation phenomena of FDEs depending on parameters with chap. This well illustrated book aims to be self contained so the readers will find in this book all relevant materials in bifurcation, dynamical systems with symmetry, functional differential equations, normal forms and center manifold reduction. This material was used in graduate courses on functional differential equations at Hunan University (China) and York University (Canada).

Download or read book Structural Stability written by Wai-Kai Chen and published by Prentice Hall. This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Stability: Theory and Implementation is a practical work that provides engineers and students in structural engineering or structured mechanics with the background needed to make the transition from fundamental theory to practical design rules and computer implementation. Beginning with the basic principles of structural stability and basic governing equations, Structural Stability is a concise and comprehensive introduction that applies the principles and theory of structural stability (which are the basis for structural steel design) to the solution of practical building frame design problems. Special features include: modern theories of structural stability of members and frames, and a discussion of how these theories may be utilized to provide design rules and calculation techniques for design important governing equations and the classical solutions used in design processes examples of analytical and numerical methods selected as the most useful and practically applicable methods available detailed information on the stability design rules of the 1986 AISC/LRFD Specifications for the design, fabrication, and erection of structural steel for buildings dual units (SI and English) with most of the material presented in a non-dimensional format fully worked examples, end-of-chapter problems, answers to selected problems, and clear illustrations and tables Am outstandingly practical resource, Structural Stability offers the reader an understanding of the fundamental principles and theory of structural stability not only in an idealized, perfectly elastic system, but also in an inelastic, imperfect system representative of the actual structural systems encountered in engineering practice.

Download or read book Bifurcations and Catastrophes written by Michel Demazure and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a lecture course, this text gives a rigorous introduction to nonlinear analysis, dynamical systems and bifurcation theory including catastrophe theory. Wherever appropriate it emphasizes a geometrical or coordinate-free approach allowing a clear focus on the essential mathematical structures. It brings out features common to different branches of the subject while giving ample references for more advanced or technical developments.

Download or read book Numerical Methods for Bifurcation Problems and Large Scale Dynamical Systems written by Eusebius Doedel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute for Mathematics and its Applications (IMA) devoted its 1997-1998 program to Emerging Applications of Dynamical Systems. Dynamical systems theory and related numerical algorithms provide powerful tools for studying the solution behavior of differential equations and mappings. In the past 25 years computational methods have been developed for calculating fixed points, limit cycles, and bifurcation points. A remaining challenge is to develop robust methods for calculating more complicated objects, such as higher- codimension bifurcations of fixed points, periodic orbits, and connecting orbits, as well as the calcuation of invariant manifolds. Another challenge is to extend the applicability of algorithms to the very large systems that result from discretizing partial differential equations. Even the calculation of steady states and their linear stability can be prohibitively expensive for large systems (e.g. 10_3- -10_6 equations) if attempted by simple direct methods. Several of the papers in this volume treat computational methods for low and high dimensional systems and, in some cases, their incorporation into software packages. A few papers treat fundamental theoretical problems, including smooth factorization of matrices, self -organized criticality, and unfolding of singular heteroclinic cycles. Other papers treat applications of dynamical systems computations in various scientific fields, such as biology, chemical engineering, fluid mechanics, and mechanical engineering.

Download or read book Material Instabilities in Elastic and Plastic Solids written by Henryk Petryk and published by Springer. This book was released on 2014-05-04 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects recent theoretical developments in the area of material instability in elastic and plastic solids along with related analytical and numerical methods and applications. The existing different approaches to instability phenomena in metal single crystals, polycristals and in geomaterials are presented with the emphasis laid on mutual relations and on unifying concepts, including elliptictly loss and the energy criterion. Quasi-static bifurcation, initiation of single or multiple shear bands and post-critical strain localization are examined along with dynamic phenomena as wave propagation, moving shocks, internal snap-through and instability of flutter type. This gives an overview of a variety of material instability problems, methods and applications.

Download or read book Stability and Nonlinear Solid Mechanics written by Quoc Son Nguyen and published by Wiley. This book was released on 2000-10-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the problem of stability and bifurcation is well understood in Mechanics, very few treatises have been devoted to stability and bifurcation analysis in dissipative media, in particular with regard to present and fundamental problems in Solid Mechanics such as plasticity, fracture and contact mechanics. Stability and Nonlinear Solid Mechanics addresses this lack of material, and proposes to the reader not only a unified presentation of nonlinear problems in Solid Mechanics, but also a complete and unitary analysis on stability and bifurcation problems arising within this framework. Main themes include: * elasticity and plasticity problems in small and finite deformation * general concepts of stability and bifurcation and basic results * elastic buckling * plastic buckling of structures * standard dissipative systems obeying maximum dissipation. These themes are developed in 20 chapters and illustrated by various analytical and numerical results. The coverage given here extends beyond the limited boundaries of previous works, resulting in a text of lasting interest and value to postgraduate students, researchers and practitioners working in mechanical, civil and aerospace engineering, as well as materials science.