Download or read book Wandering Spurs in MASH Based Fractional N Frequency Synthesizers written by Dawei Mai and published by Springer Nature. This book was released on 2022-03-11 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few people know what wandering spurs are; fewer still know how to get rid of them. This book, which is written by those who raised awareness of wandering spurs, explained how they arise, and invented ways to get rid of them, contains valuable insights, analytical techniques and examples that will enable the reader to become an expert in the area. The book is aimed at circuit design professionals who need to ensure that their designs are not compromised by wandering spurs. In addition to insights, theory, and analysis, it contains practical circuit solutions, the performance of which are characterized experimentally. This book explains—using simulation, analysis, and experimental measurements—what wandering spurs are, how they arise, how to characterize them and, most importantly, how to get rid of them. The authors present not only theoretical analysis and simulation strategies, but also provide an overview of spectral analysis techniques for studying the phenomenon and convincing experimental results from both commercially available and custom-designed monolithic synthesizers. Explains what wandering spurs are and how they differ qualitatively from the well-known fixed spurs that plague fractional-N frequency synthesizers; Provides analytical and simulation methods to study wandering spurs and original analysis of the cause of this recently reported spectral phenomenon; Presents and analyses theoretical designs based on a conventional MASH 1-1-1 to mitigate wandering spurs; Describes measured performance for the discussed designs, confirming their effectiveness in mitigating wandering spurs.

Download or read book Spurs in Fractional N Frequency Synthesizers written by Sohail Imran Saeed and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of a fractional-N frequency synthesizer is degraded due to the presence of unwanted spurious tones (spurs) in the output spectrum. The Digital Delta-Sigma Modulator can be directly responsible for the generation of spurs because of its inherent nonlinearity and periodicity. In this booklet we have predicted that specific nonlinearities in a fractional-N frequency synthesizer produce spurs at well-defined frequencies even if the output of the DDSM is spur free. Different spur free DDSM architectures have been investigated for the analysis of spurious tones in the output spectrum of fractional-N frequency synthesizers.

Download or read book Wandering Spurs in MASH based Fractional N Frequency Synthesizers written by Dawei Mai and published by . This book was released on 2021 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analog Circuits for Machine Learning Current Voltage Temperature Sensors and High speed Communication written by Pieter Harpe and published by Springer Nature. This book was released on 2022-03-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 29th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, with specific contributions focusing on analog circuits for machine learning, current/voltage/temperature sensors, and high-speed communication via wireless, wireline, or optical links. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book CMOS PLL Synthesizers Analysis and Design written by Keliu Shu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to the advance of semiconductor and communication technology, the wireless communication market has been booming in the last two decades. It evolved from simple pagers to emerging third-generation (3G) cellular phones. In the meanwhile, broadband communication market has also gained a rapid growth. As the market always demands hi- performance and low-cost products, circuit designers are seeking hi- integration communication devices in cheap CMOS technology. The phase-locked loop frequency synthesizer is a critical component in communication devices. It works as a local oscillator for frequency translation and channel selection in wireless transceivers and broadband cable tuners. It also plays an important role as the clock synthesizer for data converters in the analog-and-digital signal interface. This book covers the design and analysis of PLL synthesizers. It includes both fundamentals and a review of the state-of-the-art techniques. The transient analysis of the third-order charge-pump PLL reveals its locking behavior accurately. The behavioral-level simulation of PLL further clarifies its stability limit. Design examples are given to clearly illustrate the design procedure of PLL synthesizers. A complete derivation of reference spurs in the charge-pump PLL is also presented in this book. The in-depth investigation of the digital CA modulator for fractional-N synthesizers provides insightful design guidelines for this important block.

Download or read book Digital Subsampling Phase Lock Techniques for Frequency Synthesis and Polar Transmission written by Nereo Markulic and published by Springer. This book was released on 2019-01-30 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains concepts behind fractional subsampling-based frequency synthesis that is re-shaping today’s art in the field of low-noise LO generation. It covers advanced material, giving clear guidance for development of background-calibrated environments capable of spur-free synthesis and wideband phase modulation. It further expands the concepts into the field of subsampling polar transmission, where the newly developed architecture enables unprecedented spectral efficiency levels, unquestionably required by the upcoming generation of wireless standards.

Download or read book CMOS Fractional N Synthesizers written by Bram De Muer and published by Springer Science & Business Media. This book was released on 2005-12-29 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Fractional-N Synthesizers starts with a comprehensive introduction to general frequency synthesis. Different architectures and synthesizer building blocks are discussed with their relative importance on synthesizer specifications. The process of synthesizer specification derivation is illustrated with the DCS-1800 standard as a general test case. The book tackles the design of fractional-N synthesizers in CMOS on circuit level as well as system level. The circuit level focuses on high-speed prescaler design up to 12 GHz in CMOS and on fully integrated, low-phase-noise LC-VCO design. High-Q inductor integration and simulation in CMOS is elaborated and flicker noise minimization techniques are presented, ranging from bias point choice to noise filtering techniques. On a higher level, a systematic design strategy has been developed that trades off all noise contributions and fast dynamics for integrated capacitance (area). Moreover, a theoretical DeltaSigma phase noise analysis is presented, extended with a fast non-linear analysis method to accurately predict the influence of PLL non-linearities on the spectral purity of the DeltaSigma fractional-N frequency synthesizers.

Download or read book Frequency Synthesizers written by Alexander Chenakin and published by Artech House. This book was released on 2011 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A frequency synthesizer is an electronic system for generating any of a range of frequencies from a single fixed oscillator. They are found in modern devices like radio receivers, mobile phones, and GPS systems. This comprehensive resource offers RF and microwave engineers a thorough overview of both well-established and recently developed frequency synthesizer design techniques. Professionals find expert guidance on all design aspects, including main architectures, key building blocks, and practical circuit implementation. Engineers learn the development process and gain a solid understanding of how to build a synthesizer from a basic diagram to the final product.Starting with a simple single-loop PLL example, the book progressively examines various alternatives -- fractional-N, DDS, frequency offset, multiloop and more OCo to achieve required performance objectives. This unique volume gathers a collection of block diagrams, clever circuits, design recipes, and other hard-to-find information that is usually treated as OC design secretsOCO. Written in a simple yet rigorous style with numerous illustrations, the book is an all-in-one reference for both beginner and experienced designers.

Download or read book Analysis Prediction and Mitigation of Nonlinearity induced Spurs and Noise in Fractional N Frequency Synthesizers written by Valerio Mazzaro and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi GHz Frequency Synthesis Division written by Hamid R. Rategh and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past 10 years extensive effort has been dedicated to commercial wireless local area network (WLAN) systems. Despite all these efforts, however, none of the existing systems has been successful, mainly due to their low data rates. The increasing demand for WLAN systems that can support data rates in excess of 20 Mb/s enticed the FCC to create an unlicensed national information infrastructure (U–NII) band at 5 GHz. This frequency band provides 300 MHz of spectrum in two segments: a 200 MHz(5.15–5.35 GHz) and a 100 MHz (5.725–5.825 GHz) frequency band. This newly released spectrum, and the fast trend of CMOS scaling, provide an opportunity to design WLAN systems with high data rate and low cost. One of the existing standards at 5 GHz is the European high performance radio LAN (HIPERLAN) standard that supports data rates as high as 20 Mb/s. One of the main building blocks of each wireless system is the f- quency synthesizer. Phase–locked loops (PLLs) are universally used to design radio frequency synthesizers. Reducing the power consumption of the frequency dividers of a PLL has always been a challenge. In this book, we introduce an alternative solution for conventional flipflop based xiv MULTI–GHZ FREQUENCY SYNTHESIS & DIVISION frequency dividers. An injection–locked frequency divider (ILFD) takes advantage of the narrowband nature of the wireless systems and employs resonators to trade off bandwidth for power.

Download or read book Advanced Frequency Synthesis by Phase Lock written by William F. Egan and published by John Wiley & Sons. This book was released on 2011-10-07 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest frequency synthesis techniques, including sigma-delta,Diophantine, and all-digital Sigma-delta is a frequency synthesis technique that has risen inpopularity over the past decade due to its intensely digital natureand its ability to promote miniaturization. A continuation of thepopular Frequency Synthesis by Phase Lock, Second Edition, thistimely resource provides a broad introduction to sigma-delta bypairing practical simulation results with cutting-edge research.Advanced Frequency Synthesis by Phase Lock discusses bothsigma-delta and fractional-n—the still-in-use forerunner tosigma-delta—employing Simulink® models and detailedsimulations of results to promote a deeper understanding. After a brief introduction, the book shows how spurs areproduced at the synthesizer output by the basic process anddifferent methods for overcoming them. It investigates how variousdefects in sigma-delta synthesis contribute to spurs or noise inthe synthesized signal. Synthesizer configurations are analyzed,and it is revealed how to trade off the various noise sources bychoosing loop parameters. Other sigma-delta synthesis architecturesare then reviewed. The Simulink simulation models that provided data for thepreceding discussions are described, providing guidance in makinguse of such models for further exploration. Next, another methodfor achieving wide loop bandwidth simultaneously with fineresolution—the Diophantine Frequency Synthesizer—isintroduced. Operation at extreme bandwidths is also covered,further describing the analysis of synthesizers that push theirbandwidths close to the sampling-frequency limit. Lastly, the bookreviews a newly important technology that is poised to becomewidely used in high-production consumerelectronics—all-digital frequency synthesis. Detailed appendices provide in-depth discussion on variousstages of development, and many related resources are available fordownload, including Simulink models, MATLAB® scripts,spreadsheets, and executable programs. All these features make thisauthoritative reference ideal for electrical engineers who want toachieve an understanding of sigma-delta frequency synthesis and anawareness of the latest developments in the field.

Download or read book Wireless Receiver Architectures and Design written by Tony J. Rouphael and published by Academic Press. This book was released on 2014-06-17 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver‘s analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, starting from an analysis of requirements to the choice of architecture and finally to the design and algorithm development. The advantages and disadvantages of each wireless architecture and the suitability to a standard are given, enabling a better choice of design methodology, receiver lineup, analog block, and digital algorithm for a particular architecture. Whether you are a communications engineer working in system architecture and waveform design, an RF engineer working on noise and linearity budget and line-up analysis, a DSP engineer working on algorithm development, or an analog or digital design engineer designing circuits for wireless transceivers, this book is your one-stop reference and guide to designing low-cost low-power multi-mode multi-standard receivers. The material in this book is organized and presented to lead you from applied theory to practical design with plenty of examples and case studies drawn from modern wireless standards. Provides a complete description of receiver architectures together with their pros and cons, enabling a better choice of design methodology Covers the design trade-offs and algorithms between the analog front end and the digital modem – enabling an end-to-end design approach Addresses multi-mode multi-standard low-cost, low-power radio design – critical for producing the applications for Smart phones and portable internet devices

Download or read book Pll Performance Simulation and Design written by Dean Banerjee and published by Dog Ear Publishing. This book was released on 2006-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for the reader who wishes to gain a solid understanding of Phase Locked Loop architectures and their applications. It provides a unique balance between both theoretical perspectives and practical design trade-offs. Engineers faced with real world design problems will find this book to be a valuable reference providing example implementations, the underlying equations that describe synthesizer behavior, and measured results that will improve confidence that the equations are a reliable predictor of system behavior. New material in the Fourth Edition includes partially integrated loop filter implementations, voltage controlled oscillators, and modulation using the PLL.

Download or read book Mixed Signal VLSI Wireless Design written by Emad N. Farag and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Wireless is coming” was the message received by VLSI designers in the early 1990’s. They believed it. But they never imagined that the wireless wave would be coming with such intensity and speed. Today one of the most challenging areas for VLSI designers is VLSI circuit and system design for wireless applications. New generation of wireless systems, which includes multimedia, put severe constraints on performance, cost, size, power and energy. The challenge is immense and the need for new generation of VLSI designers, who are fluent in wireless communication and are masters of mixed signal design, is great. No single text or reference book contains the necessary material to educate such needed new generation of VLSIdesigners. There are gaps. Excellent books exist on communication theory and systems, including wireless applications and others treat well basic digital, analog and mixed signal VLSI design. We feel that this book is the first of its kind to fill that gap. In the first half of this book we offer the reader (the VLSI designer) enough material to understand wireless communication systems. We start with a historical account. And then we present an overview of wireless communication systems. This is followed by detailed treatment of related topics; the mobile radio, digital modulation and schemes, spread spectrum and receiver architectures. The second half of the book deals with VLSI design issues related to mixed-signal design. These include analog-to-digital conversion, transceiver design, digital low-power techniques, amplifier design, phase locked loops and frequency synthesizers.

Download or read book CMOS Time Mode Circuits and Systems written by Fei Yuan and published by CRC Press. This book was released on 2018-09-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-mode circuits, where information is represented by time difference between digital events, offer a viable and technology-friendly means to realize mixed-mode circuits and systems in nanometer complementary metal-oxide semiconductor (CMOS) technologies. Various architectures of time-based signal processing and design techniques of CMOS time-mode circuits have emerged; however, an in-depth examination of the principles of time-based signal processing and design techniques of time-mode circuits has not been available—until now. CMOS Time-Mode Circuits and Systems: Fundamentals and Applications is the first book to deliver a comprehensive treatment of CMOS time-mode circuits and systems. Featuring contributions from leading experts, this authoritative text contains a rich collection of literature on time-mode circuits and systems. The book begins by presenting a critical comparison of voltage-mode, current-mode, and time-mode signaling for mixed-mode signal processing and then: Covers the fundamentals of time-mode signal processing, such as voltage-to-time converters, all-digital phase-locked loops, and frequency synthesizers Investigates the performance characteristics, architecture, design techniques, and implementation of time-to-digital converters Discusses time-mode delta-sigma-based analog-to-digital converters, placing a great emphasis on time-mode quantizers Includes a detailed study of ultra-low-power integrated time-mode temperature measurement systems CMOS Time-Mode Circuits and Systems: Fundamentals and Applications provides a valuable reference for circuit design engineers, hardware system engineers, graduate students, and others seeking to master this fast-evolving field.

Download or read book Analog Circuit Design written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2005-12-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Number 12 in the successful series of Analog Circuit Design provides valuable information and excellent overviews of analogue circuit design, CAD and RF systems. The series is an ideal reference for those involved in analogue and mixed-signal design.

Download or read book Wireless Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.