Download or read book Multilayer Thin Films written by Gero Decher and published by John Wiley & Sons. This book was released on 2012-06-11 with total page 1157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, comprehensive edition of the pioneering book in this fi eld has been completely revised and extended, now stretching to two volumes. The result is a comprehensive summary of layer-by-layer assembled, truly hybrid nanomaterials and thin fi lms, covering organic, inorganic, colloidal, macromolecular, and biological components, as well as the assembly of nanoscale fi lms derived from them on surfaces. These two volumes are essential for anyone working in the field, as well as scientists and researchers active in materials development, who needs the key knowledge provided herein for linking the field of molecular self-assembly with the bio- and materials sciences.

Download or read book Handbook of Materials for Nanomedicine written by Vladimir Torchilin and published by CRC Press. This book was released on 2020-03-16 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fast-developing field of nanomedicine, a broad variety of materials have been used for the development of advanced delivery systems for drugs, genes, and diagnostic agents. With the recent breakthroughs in the field, we are witnessing a new age of disease management, which is governed by precise regulation of dosage and delivery. This book presents the advances in the use of polymeric nanomaterials for medical imaging, diagnosis, theranostics, and drug delivery. Beginning with the combinatorial approach for polymer design, it discusses star-shaped amphiphilic polymers, self-assembling polymer–drug conjugates, amphiphilic dendrimers, dendrimer nanohybrids, sustainable green polymeric nanoconstructs, chitosan-based nanogels, and multifunctional hybrid nanogels. The book provides all available information about these materials and describes in detail their advantages and disadvantages and the areas where they could be utilized successfully.

Download or read book Inhaler Devices written by Polina Prokopovich and published by Elsevier. This book was released on 2013-04-23 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their direct impact on the health and quality of life for millions, inhalers represent a major turning point in the history of modern medicine. Inhaler devices: Fundamentals, design and drug delivery provides readers with an introduction to the fundamentals of inhaler technology, with a comprehensive discussion of the history of inhalers as well as a discussion on current research and development.Part one discusses the fundamentals and development of inhaler devices as well as drug formulations for inhalers. The treatment of asthma is also discussed. Part two reviews recent developments in drug formulation and nanotechnology for inhaler devices, emerging inhaler technology and possible future trends.Inhaler devices: Fundamentals, design and drug delivery is an essential design guide for good industrial practice, and will be an invaluable resource for those researching and treating conditions such as asthma; and those developing and manufacturing inhalation devices. - Introduces the fundamentals of inhaler technology - Discusses the history of inhalers as well as current research and development as well as possible future trends - Considers the development of inhaler devices, drug formulations and discusses the treatment of asthma

Download or read book Anti Abrasive Nanocoatings written by M Aliofkhazraei and published by Elsevier. This book was released on 2014-12-09 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the fabrication methods for anti-abrasive nanocoatings. The connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties (i.e. nanohardness, toughness, wear rate, load-bearing ability, friction coefficient, and scratch resistance) are discussed. Size-affected mechanical properties of nanocoatings are examined, including their uses. Anti-abrasive nanocoatings, including metallic-, ceramic-, and polymeric-based layers, as well as different kinds of nanostructures, such as multi-layered nanocomposites and thin films, are reviewed. - Provides a comprehensive overview of the fabrication methods for anti-abrasive nanocoatings - Discusses the connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties - Reviews advantages and drawbacks of fabrication methods for anti-abrasive nanocoatings and clarifies the place of these nanocoatings in the world of nanotechnology

Download or read book Biomaterials Fabrication and Processing Handbook written by Paul K. Chu and published by CRC Press. This book was released on 2008-03-27 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on a variety of production and processing aspects of the latest biomaterials. It discusses how scaffolds are used in tissue engineering and describes common implant materials, such as hard tissue, blood contacting, and soft tissue. The book also examines the important role nanotechnology plays in the preparation of drugs, protein delivery, tissue engineering, cardiovascular biomaterials, hard tissue replacements, biosensors, and bio-MEMS. With contributions from renowned international experts and extensive reference lists in each chapter, this book provides detailed, practical information to produce biomaterials and employ them in biomedicine.

Download or read book Photoenergy and Thin Film Materials written by Xiao-Yu Yang and published by John Wiley & Sons. This book was released on 2019-03-19 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest research & developments and future trends in photoenergy and thin film materials—two important areas that have the potential to spearhead the future of the industry. Photoenergy materials are expected to be a next generation class of materials to provide secure, safe, sustainable and affordable energy. Photoenergy devices are known to convert the sunlight into electricity. These types of devices are simple in design with a major advantage as they are stand-alone systems able to provide megawatts of power. They have been applied as a power source for solar home systems, remote buildings, water pumping, megawatt scale power plants, satellites, communications, and space vehicles. With such a list of enormous applications, the demand for photoenergy devices is growing every year. On the other hand, thin films coating, which can be defined as the barriers of surface science, the fields of materials science and applied physics are progressing as a unified discipline of scientific industry. A thin film can be termed as a very fine, or thin layer of material coated on a particular surface, that can be in the range of a nanometer in thickness to several micrometers in size. Thin films are applied in numerous areas ranging from protection purposes to electronic semiconductor devices. The 16 chapters in this volume, all written by subject matter experts, demonstrate the claim that both photoenergy and thin film materials have the potential to be the future of industry.

Download or read book Layer by Layer Films for Biomedical Applications written by Catherine Picart and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: The layer-by-layer (LbL) deposition technique is a versatile approach for preparing nanoscale multimaterial films: the fabrication of multicomposite films by the LbL procedure allows the combination of literally hundreds of different materials with nanometer thickness in a single device to obtain novel or superior performance. In the last 15 years the LbL technique has seen considerable developments and has now reached a point where it is beginning to find applications in bioengineering and biomedical engineering. The book gives a thorough overview of applications of the LbL technique in the context of bioengineering and biomedical engineering where the last years have witnessed tremendous progress. The first part familiarizes the reader with the specifics of cell-film interactions that need to be taken into account for successful application of the LbL method in biological environments. The second part focuses on LbL-derived small drug delivery systems and antibacterial agents, and the third part covers nano- and microcapsules as drug carriers and biosensors. The fourth and last part focuses on larger-scale biomedical applications of the LbL method such as engineered tissues and implant coatings.

Download or read book Materials Nanoarchitectonics written by Katsuhiko Ariga and published by Elsevier. This book was released on 2023-12-07 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Nanoarchitectonics: From Integrated Molecular Systems to Advanced Devices provides the latest information on the design and molecular manipulation of self-organized hierarchically structured systems using tailor-made nanoscale materials as structural and functional units. The book is organized into three main sections that focus on molecular design of building blocks and hybrid materials, formation of nanostructures, and applications and devices. Bringing together emerging materials, synthetic aspects, nanostructure strategies, and applications, the book aims to support further progress, by offering different perspectives and a strong interdisciplinary approach to this rapidly growing area of innovation. This is an extremely valuable resource for researchers, advanced students, and scientists in industry, with an interest in nanoarchitectonics, nanostructures, and nanomaterials, or across the areas of nanotechnology, chemistry, surface science, polymer science, electrical engineering, physics, chemical engineering, and materials science. - Offers a nanoarchitectonic perspective on emerging fields, such as metal-organic frameworks, porous polymer materials, or biomimetic nanostructures - Discusses different approaches to utilizing "soft chemistry" as a source for hierarchically organized materials - Offers an interdisciplinary approach to the design and construction of integrated chemical nano systems - Discusses novel approaches towards the creation of complex multiscale architectures

Download or read book Nanoparticle and Microparticle based Delivery Systems written by David Julian McClements and published by CRC Press. This book was released on 2014-08-12 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in nanoparticle and microparticle delivery systems are revolutionizing delivery systems in the food industry. These developments have the potential to solve many of the technical challenges involved in creating encapsulation, protection, and delivery of active ingredients, such as colors, flavors, preservatives, vitamins, minerals, and nutraceuticals. Nanoparticle- and Microparticle-based Delivery Systems: Encapsulation, Protection and Release of Active Compounds explores various types of colloidal delivery systems available for encapsulating active ingredients, highlighting their relative advantages and limitations and their use. Written by an international authority known for his clear and rigorous technical writing style, this book discusses the numerous kinds of active ingredients available and the issues associated with their encapsulation, protection, and delivery. The author takes a traditional colloid science approach and emphasizes the practical aspects of formulation of particulate- and emulsion-based delivery systems with food applications. He then covers the physicochemical and mechanical methods available for manufacturing colloidal particles, highlighting the importance of designing particles for specific applications. The book includes chapters devoted specifically to the three major types of colloidal delivery systems available for encapsulating active ingredients in the food industry: surfactant-based, emulsion-based, and biopolymer-based. It then reviews the analytical tools available for characterizing the properties of colloidal delivery systems, presents the mathematical models for describing their properties, and highlights the factors to consider when selecting an appropriate delivery system for a particular application backed up by specific case studies. Based on insight from the author’s own experience, the book describes why delivery systems are needed, the important factors to consider when designing them, methods of characterizing them, and specific examples of the range of food-grade delivery systems available. It gives you the necessary knowledge, understanding, and appreciation of developments within the current research literature in this rapidly growing field and the confidence to perform reliable experimental investigations according to modern international standards.

Download or read book Chemoresponsive Materials written by Hans-Jörg Schneider and published by Royal Society of Chemistry. This book was released on 2022-07-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart materials stimulated by chemical or by logical signals hold promise for many applications, including new sensors and actuators for medicine, environmental and process control. In contrast to other books on responsive materials which are restricted to sensing, this volume not only highlights fundamental chemical and physical principles but also focuses on the use of smart materials for applications such as drug delivery, wound healing, cell adhesion, tuneable vesicles, surface control, smart paints and glasses, separations, oil recovery and artificial muscles. In this completely updated and expanded edition, readers are introduced to the area with chapters reflecting the enormous expansion of the field in recent years. Different responsive material systems will be covered including hydrogels, membranes, thin layers, polymer brushes, chemomechanical and imprinted polymers, nanomaterials and silica particles. With contributions from internationally recognised experts, the book will appeal to graduate students and researchers in academia, healthcare and industry interested in functional materials and their applications.

Download or read book Biopolymer Membranes and Films written by Mariana Agostini De Moraes and published by Elsevier. This book was released on 2020-06-19 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer Membranes and Films: Health, Food, Environment, and Energy Applications presents the latest techniques for the design and preparation of biopolymer-based membranes and films, leading to a range of cutting-edge applications. The first part of the book introduces the fundamentals of biopolymers, two-dimensional systems, and the characterization of biopolymer membranes and films, considering physicochemical, mechanical and barrier properties. Subsequent sections are organized by application area, with each chapter explaining how biopolymer-based membranes or films can be developed for specific innovative uses across the health, food, environmental and energy sectors. This book is a valuable resource for researchers, scientists and advanced students involved in biopolymer science, polymer membranes and films, polymer chemistry and materials science, as well as for those in industry and academia who are looking to develop materials for advanced applications in the health, food science, environment or energy industries. - Presents detailed coverage of a range of novel applications in key strategic areas across health, food, environment and energy - Considers the difficulties associated with two-dimensional materials - Assists the reader in selecting the best materials and properties for specific applications - Helps researchers, scientists and engineers combine the enhanced properties of membranes and films with the sustainable characteristics of biopolymer-based materials

Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.

Download or read book Functionalized Nanomaterial Based Electrochemical Sensors written by Jamballi G. Manjunatha and published by Woodhead Publishing. This book was released on 2022-01-11 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Nanomaterial-Based Electrochemical Sensors: Principles, Fabrication Methods, and Applications provides a comprehensive overview of materials, functionalized interfaces, fabrication strategies and application areas. Special attention is given to the remaining challenges and opportunities for commercial realization of functionalized nanomaterial-based electrochemical sensors. An assortment of nanomaterials has been investigated for their incorporation into electrochemical sensors. For example, carbon- based nanomaterials (carbon nanotube, graphene and carbon fiber), noble metals (Au, Ag and Pt), polymers (nafion, polypyrrole) and non-noble metal oxides (Fe2O3, NiO, and Co3O4). The most relevant materials are discussed in the book with an emphasis on their evaluation of their realization in commercial applications. Application areas touched on include the environment, food and medicine industries. Health, safety and regulation considerations are touched on, along with economic and commercialization trends. - Introduces the principles of nanomaterials for electrochemical sensing applications - Reviews the most relevant fabrication strategies for functionalized nanomaterial-based electrochemical sensing platforms - Discusses considerations for the commercial realization of functionalized nanomaterial-based electrochemical sensors in the environment, food and point-of-care applications

Download or read book Flame Retardant Polymeric Materials written by Yuan Hu and published by CRC Press. This book was released on 2019-08-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flame Retardant Polymeric Materials provides a comprehensive and up-to-date overview of the field, from basic properties and mechanisms of action for flame retardants to emerging methods, materials, and industrial applications. With over 120 black and white images, Hu and Wang cover the latest in the development of novel polymer nanocomposites such as graphene, CNTs, LDHs, POSS, and techniques such as layer-by-layer assembly. These expert authors also include discussions on the important flame-retardant systems based on phosphorus, silicon, and boron. In doing so, they highlight the use of flame-retardants in varying industries, for example, construction, textiles, and aviation. This comprehensive handbook is an essential read for students and academics of physics with a particular interest in flame-retardant materials. It would also be recommended for professionals within the materials science and engineering fields.

Download or read book Nanotechnology Commercialization written by Thomas O. Mensah and published by John Wiley & Sons. This book was released on 2017-10-20 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fascinating and informative look at state-of-the-art nanotechnology research, worldwide, and its vast commercial potential Nanotechnology Commercialization: Manufacturing Processes and Products presents a detailed look at the state of the art in nanotechnology and explores key issues that must still be addressed in order to successfully commercialize that vital technology. Written by a team of distinguished experts in the field, it covers a range of applications notably: military, space, and commercial transport applications, as well as applications for missiles, aircraft, aerospace, and commercial transport systems. The drive to advance the frontiers of nanotechnology has become a major global initiative with profound economic, military, and environmental implications. Nanotechnology has tremendous commercial and economic implications with a projected $ 1.2 trillion-dollar global market. This book describes current research in the field and details its commercial potential—from work bench to market. Examines the state of the art in nanotechnology and explores key issues surrounding its commercialization Takes a real-world approach, with chapters written from a practical viewpoint, detailing the latest research and considering its potential commercial and defense applications Presents the current research and proposed applications of nanotechnology in such a way as to stimulate further research and development of new applications Written by an all-star team of experts, including pioneer patent-holders and award-winning researchers in nanotechnology The major challenge currently faced by researchers in nanotechnology is successfully transitioning laboratory research into viable commercial products for the 21st century. Written for professionals across an array of research and engineering disciplines, Nanotechnology Commercialization: Manufacturing Processes and Products does much to help them bridge the gap between lab and marketplace.

Download or read book Nanomaterials in Energy and Environmental Applications written by Junhui He and published by CRC Press. This book was released on 2016-10-14 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience and nanotechnology are interdisciplinary fields that bring together physicists, chemists, materials scientists, and engineers to meet the potential future challenges that humankind will face, including the search for renewable energies for sustainable development and new technologies for carbon capture and environmental protection. Among the current subjects in nanoscience and nanotechnology, nanomaterials are developing fast and explosively and attracting a huge amount of attention. They continue to show promising potential and have found application in solar cells, fuel cells, secondary batteries, supercapacitors, air and water purification, and removal of domestic and outdoor air pollutants. To summarize the past developments and encourage future efforts, this book presents contributions from world-renowned specialists in the fields of nanomaterials, energy, and environmental science. It discusses the design and fabrication of nanostructured materials and their energy and environmental applications.

Download or read book Frontiers in Nano therapeutics written by Nishat Tasnim and published by Springer. This book was released on 2017-06-22 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief highlights recent research advances in the area of nano-therapeutics. Nanotechnology holds immense potential for application in a wide range of biological and engineering applications such as molecular sensors for disease diagnosis, therapeutic agents for the treatment of diseases, a vehicle for delivering therapeutics and imaging agents for theranostic applications, both in-vitro and in-vivo. The brief is grouped into the following sections namely, A) Discrete Nanosystems ; B) Anisotropic Nanoparticles; C) Nano-films/coated/layered and D) Nano-composites.