Download or read book Spouted and Spout Fluid Beds written by Norman Epstein and published by Cambridge University Press. This book was released on 2010-12-23 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the pioneering text by Mathur and Epstein over 35 years ago, much of the work on this subject has been extended or superseded, producing an enormous body of scattered literature. This edited volume unifies the subject, pulling material together and underpinning it with fundamental theory to produce the only complete, up-to-date reference on all major areas of spouted bed research and practice. With contributions from internationally renowned research groups, this book guides the reader through new developments, insights and models. The hydrodynamic and reactor models of spouted and spout-fluid beds are examined, as well as such topics as particle segregation, heat and mass transfer, mixing and scale-up. Later chapters focus on drying, particle-coating and energy-related applications based on spouted and spout-fluid beds. This is a valuable resource for chemical and mechanical engineers in research and industry.
Download or read book Spouted Beds written by Kishan Mather and published by Elsevier. This book was released on 2012-12-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spouted Beds is a comprehensive 13-chapter book that covers the spouting phenomenon and the special features and applications of spouted beds. After briefly discussing the history and features of spouted bed compared to fluidized bed, the book deals with the fluid and solid dynamics of spouted beds. The book then gives a description of the internal geometrical structure of a stable bed, as well as the estimation of maximum spoutable bed depth. The subsequent chapters examine the attrition and heat and mass transfer in spouted beds, both between fluid and particles and within particles. The book further discusses theoretical aspects on using a spouting bed in carrying out gas phase chemical reaction. It also describes the application of spouted bed to a large variety of mechanical, thermal, diffusional, and chemical processes, whether on the bench, pilot, or commercial scale. This is followed by a discussion on the various process and equipment modifications to a standard spouted bed that have been devised to achieve specific ends. The final chapter outlines some practical hints for the benefit of the spouted bed designer and operator. This book is an ideal resource text to spouted bed designers, operators, and manufacturers.
Download or read book Essentials of Fluidization Technology written by John R. Grace and published by John Wiley & Sons. This book was released on 2020-03-11 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and clear treatment of the fundamentals of fluidization, with a view to its applications in the process and energy industries.
Download or read book Plasma Fluidized Bed written by Changming Du and published by Springer. This book was released on 2018-05-09 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview of the plasma fluidized bed. It is an innovative tool and generally combines plasma process with another efficient reactor, fluidized bed, providing an excellent method for particulate processes over conventional technology. The development and designs of typical types of plasma fluidized beds, mainly thermal plasma fluidized beds and non-thermal plasma fluidized beds are discussed. The influencing factors on the performance of plasma fluidized beds are analyzed in detail. The mechanism, i.e. the discharge characteristics, hydrodynamics, heat transfer and mass transfer are analyzed to offer a further insight of plasma fluidized beds. Applications of plasma fluidized beds for different areas, including metallurgy extraction, green energy process, environmental protection and advanced materials are presented. The book is a valuable reference for scientists, engineers and graduate students in chemical engineering and relative fields.
Download or read book Fluid Bed Technology in Materials Processing written by C. K. Gupta and published by CRC Press. This book was released on 1998-12-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of materials processing techniques. This singular resource discusses: All the basic aspects of fluidization essential to understand and learn about various techniques The range of industrial applications Several examples in extraction and process metallurgy Fluidization in nuclear engineering and nuclear fuel cycle with numerous examples Innovative techniques and several advanced concepts of fluidization engineering, including use and applications in materials processing as well as environmental and bio-engineering Pros and cons of various fluidization equipment and specialty of their applications, including several examples Design aspects and modeling Topics related to distributors effects and flow regimes A separate chapter outlines the importance of fluidization engineering in high temperature processing, including an analysis of the fundamental concepts and applications of high temperature fluidized bed furnaces for several advanced materials processing techniques. Presenting information usually not available in a single source, Fluid Bed Technology in Materials Processing serves Fluidization engineers Practicing engineers in process metallurgy, mineral engineering, and chemical metallurgy Researchers in the field of chemical, metallurgical, nuclear, biological, environmental engineering Energy engineering professionals High temperature scientists and engineers Students and professionals who adopt modeling of fluidization in their venture for design and scale up
Download or read book Applications of Fluidization to Food Processing written by Peter G. Smith and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization is a technique that enables solid particles to take on some of the properties of a fluid. Despite being very widely used within the food processing industry, understanding of this important technique is often limited. Applications of Fluidization to Food Processing sets out the established theory of fluidization and relates this to food processing applications, particularly in: • Drying • Freezing • Mixing • Granulation • Fermentation This important and thorough book, written by Peter Smith, who has many years’ experience teaching and researching in food processing, is an essential tool and reference for food scientists and technologists, and engineers working within the food industry. Libraries, and research and development groups within all universities and research establishments where food science, food studies, food technology, physics and engineering are studied and taught should have copies of this useful book.
Download or read book Handbook of Chemical Looping Technology written by Ronald W. Breault and published by John Wiley & Sons. This book was released on 2019-01-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date handbook on this highly topical field, covering everything from new process concepts to commercial applications. Describing novel developments as well as established methods, the authors start with the evaluation of different oxygen carriers and subsequently illuminate various technological concepts for the energy conversion process. They then go on to discuss the potential for commercial applications in gaseous, coal, and fuel combustion processes in industry. The result is an invaluable source for every scientist in the field, from inorganic chemists in academia to chemical engineers in industry.
Download or read book Handbook of Powder Science Technology written by Muhammed Fayed and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Canada, and Australia have increased teach Handbook of Powder Science and Technology, ing, research, and training activities in areas the field of powder science and technology has related to particle science and technology. gained broader recognition and its various ar In addition, it is worth mentioning the many eas of interest have become more defined and books and monographs that have been pub focused. Research and application activities lished on specific areas of particle, powder, related to particle technology have increased and particle fluid by professional publishers, globally in academia, industry, and research technical societies and university presses. Also, institutions. During the last decade, many to date, there are many career development groups, with various scientific, technical, and courses given by specialists and universities on engineering backgrounds have been founded various facets of powder science and technol to study, apply, and promote interest in areas ogy.
Download or read book Multiphase Flow and Fluidization written by Dimitri Gidaspow and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself. Treats fluidization as a branch of transport phenomena Demonstrates how to do transient, multidimensional simulation of multiphase processes The first book to apply kinetic theory to flow of particulates Is the only book to discuss numerical stability of multiphase equations and whether or not such equations are well-posed Explains the origin of bubbles and the concept of critical granular flow Presents clearly written exercises at the end of each chapter to facilitate understanding and further study
Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.
Download or read book Thermal Food Engineering Operations written by Nitin Kumar and published by John Wiley & Sons. This book was released on 2022-03-29 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Food Engineering Operations Presenting cutting-edge information on new and emerging food engineering processes, Thermal Food Engineering Operations, the first volume in the new series, “Bioprocessing in Food Science,” is an essential reference on the modeling, quality, safety, and technologies associated with food processing operations today. As the demand for healthy food increases in the current global scenario, manufacturers are searching for new possibilities for occupying a greater share in the rapidly changing food market. Compiled reports and updated knowledge on thermal processing of food products are imperative for commercial enterprises and manufacturing units. In the current scenario, academia, researchers, and food industries are working in a scattered manner and different technologies developed at each level are not compiled to implement for the benefits of different stakeholders. However, advancements in bioprocesses are required at all levels for the betterment of food industries and consumers. This series of groundbreaking edited volumes will be a comprehensive compilation of all the research that has been carried out so far, their practical applications, and the future scope of research and development in the food bioprocessing industry. This first volume includes all the conventional and novel thermal technologies based on conduction, convection, and radiation principles and covers the basics of microbial inactivation with heat treatments, aseptic processing, retorting, drying, dehydration, combined high-pressure thermal treatments, and safety and quality concerns in food processing. Before studying the novel non-thermal processes and the concept of minimal processing, comprehensive knowledge about the conventional thermal technologies is desired along with benefits, constraints, equipment, and implementation of these technologies. Whether for the engineer, scientist, or student, this series is a must-have for any library. This outstanding new volume: Discusses food safety and quality and thermal processing, laying the groundwork for further study and research Provides case studies of solid–liquid and supercritical fluid extraction Explores pasteurization, ohmic heating, irradiation, and more Presents cutting-edge information on new and emerging food engineering processes Audience: Process and chemical engineers, chemists, engineers in other disciplines, managers, researchers, scientists, students, and teachers working in the field of food engineering and processing
Download or read book Handbook of Fluidization and Fluid Particle Systems written by Wen-Ching Yang and published by CRC Press. This book was released on 2003-03-19 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference details particle characterization, dynamics, manufacturing, handling, and processing for the employment of multiphase reactors, as well as procedures in reactor scale-up and design for applications in the chemical, mineral, petroleum, power, cement and pharmaceuticals industries. The authors discuss flow through fixed beds, elutriation and entrainment, gas distributor and plenum design in fluidized beds, effect of internal tubes and baffles, general approaches to reactor design, applications for gasifiers and combustors, dilute phase pneumatic conveying, and applications for chemical production and processing. This is a valuable guide for chemists and engineers to use in their day-to-day work.
Download or read book Heat Transfer written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on new analytical, experimental, and computational developments in the field of research of heat and mass transfer phenomena. The generation, conversion, use, and exchange of thermal energy between physical systems are considered. Various mechanisms of heat transfer such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes are presented. Theory and fundamental research in heat and mass transfer, numerical simulations and algorithms, experimental techniques, and measurements as they applied to all kinds of applied and emerging problems are covered.
Download or read book Combustion and Gasification in Fluidized Beds written by Prabir Basu and published by CRC Press. This book was released on 2006-02-17 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides being one of the best Clean Coal Technologies, fluidized beds are also proving to be the most practical option for biomass conversion. Although the technology is well established, the field lacks a comprehensive guide to the design and operating principles of fluidized bed boilers and gasifiers. With more than 30 years of research and indus
Download or read book Oil written by Upton Sinclair and published by . This book was released on 1927 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: First edition of Sinclair's savage satire, loosely based on the life and career of Edward L. Doheny, and the Teapot Dome scandal of the Harding administration. Although Sinclair's famous novel The Jungle deals with Chicago's meatpacking industry, he moved west to Pasadena in 1916 and began writing novels set in California, the best of which was Oil!, the story of the education of Bunny Ross, son of wildcat oil man Joe Ross after oil is discovered outside Los Angeles. The novel was the basis for Paul Thomas Anderson's 2007 film There Will Be Blood. In California Classics, Lawrence Clark Powell called Oil! "Sinclair's most sustained and best writing."
Download or read book Design and Processing of Particulate Products written by Jim Litster and published by Cambridge University Press. This book was released on 2016-10-20 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique text providing comprehensive coverage of fundamental particle science, processing and technology. Including quantitative tools, real-world case studies and end-of-chapter problems, it is ideal for students in engineering and applied sciences, as well as for practitioners in a range of industries manufacturing particulate products.
Download or read book Phytotechnology written by Wanderley Pereira Oliveira and published by CRC Press. This book was released on 2022-02-16 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Herbal products have traditionally been used in several industrial sectors and have gained a notable reputation in recent years due to the current trend in society, which seeks natural, healthier, and more sustainable products. The processing of these products, however, is multiplex but important for the production of a high-quality standardised product. Phytotechnology: A Sustainable Platform for the Development of Herbal Products highlights the complex, multidisciplinary process of phytopharmaceutical technology used to create herbal remedies. Organised into four parts, various experts in the field clearly and objectively address the fundamental and technological concepts involved in the manufacturing of high-quality herbal products. Additional Features Emphasises how herbal products have traditionally been used in several industrial sectors, including pharmaceutical science, food, cosmetics, chemical engineering, and agroindustry Provides a much-needed update of the current information regarding phytopharmaceutical technology and focuses on industrial applications Written using a multidisciplinary approach, to include all subjects involved in the processing of herbal products The information presented is valuable reference material for professionals of different specialties who wish to enter this fascinating and innovative area.
