Download or read book Spin Coating Over Topography written by Loni Marit Peurrung and published by . This book was released on 1992 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Film Coating written by P.M. Schweizer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored volume provides a comprehensive and in-depth account of the highly interdisciplinary science and technology of liquid film coating. The book covers fundamental principles from a wide range of scientific disciplines, including fluid mechanics aand transport phenomena, capillary hydrodynamics, surface and colloid science. The authors, all acknowledged eperts in their fields, represent a balance between industrial and academic points of view. Throughout the text, many case studies illustrate how scientific principles together with advanced experimental and theoretical methods are applied to develop and optimize manufacturing processes of eve increasing sophiatication and efficiency. In the first part of the book, the authors systematically recount the underlying physical principles and important material properties. The second part of the book gives a comprehensive overview of the most advanced experimental, mathematical and computational methods available today to investigate coating processes. The third part provides an overview and critical literature review for all major classes of liquid film coating processes of industrial importance.
Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2010-10-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text is now fully revised and updated, providing an overview of fabrication technologies and materials needed to realize modern microdevices. It demonstrates how common microfabrication principles can be applied in different applications, to create devices ranging from nanometer probe tips to meter scale solar cells, and a host of microelectronic, mechanical, optical and fluidic devices in between. Latest developments in wafer engineering, patterning, thin films, surface preparation and bonding are covered. This second edition includes: expanded sections on MEMS and microfluidics related fabrication issues new chapters on polymer and glass microprocessing, as well as serial processing techniques 200 completely new and 200 modified figures more coverage of imprinting techniques, process integration and economics of microfabrication 300 homework exercises including conceptual thinking assignments, order of magnitude estimates, standard calculations, and device design and process analysis problems solutions to homework problems on the complementary website, as well as PDF slides of the figures and tables within the book With clear sections separating basic principles from more advanced material, this is a valuable textbook for senior undergraduate and beginning graduate students wanting to understand the fundamentals of microfabrication. The book also serves as a handy desk reference for practicing electrical engineers, materials scientists, chemists and physicists alike. www.wiley.com/go/Franssila_Micro2e
Download or read book Coatings on Glass 1998 written by H. Pulker and published by Elsevier. This book was released on 1999-11-26 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference provided a forum where researchers and industrialists working with glass and thin films, could meet and discuss common, complex problems. Many apparently old fundamental procedures and processes are still under investigation, due to their complexity. In particular it is often so that experience dictates the operating conditions, e.g. a special glass treatment or a special coating process rather than the understanding of the treatment or the process itself. It was therefore the aim of this conference to discuss the various problems and to deepen the knowledge that is useful for industrial situations. Based on the fundamental steps of glass fabrication, modification and film deposition, and property studies and the search for possible applications, a wide range of glass and plastic treatments have been carefully considered in this book by experts working in the field.
Download or read book High Performance Polymer written by Guy Rabilloud and published by Editions OPHRYS. This book was released on with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Patterning Science and Technology written by Robert Gleason and published by . This book was released on 1990 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermetallic and Ceramic Coatings written by Narnedra B. Dahotre and published by CRC Press. This book was released on 1999-02-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing the properties of specific coatings, problems related to adhesion onto various substrates, and potential commercial applications, this text surveys up-to-date techniques involved in preparing intermetallic and ceramic coatings. The book features a list of selected applications covering the latest industrially available practices.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2020-04-17 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Silicon Based MEMS Materials and Technologies, Third Edition is a comprehensive guide to MEMS materials, technologies, and manufacturing with a particular emphasis on silicon as the most important starting material used in MEMS. The book explains the fundamentals, properties (mechanical, electrostatic, optical, etc.), materials selection, preparation, modeling, manufacturing, processing, system integration, measurement, and materials characterization techniques of MEMS structures. The third edition of this book provides an important up-to-date overview of the current and emerging technologies in MEMS making it a key reference for MEMS professionals, engineers, and researchers alike, and at the same time an essential education material for undergraduate and graduate students. Provides comprehensive overview of leading-edge MEMS manufacturing technologies through the supply chain from silicon ingot growth to device fabrication and integration with sensor/actuator controlling circuits Explains the properties, manufacturing, processing, measuring and modeling methods of MEMS structures Reviews the current and future options for hermetic encapsulation and introduces how to utilize wafer level packaging and 3D integration technologies for package cost reduction and performance improvements Geared towards practical applications presenting several modern MEMS devices including inertial sensors, microphones, pressure sensors and micromirrors
Download or read book Low and High Dielectric Constant Materials written by Rajendra Singh and published by The Electrochemical Society. This book was released on 2000 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronic Materials and Processes written by R.A. Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.
Download or read book IUTAM Symposium on Free Surface Flows written by A.C. King and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free surface flows arise in the natural world, physical and biological sciences and in some areas of modern technology and engineering. Exam ples include the breaking of sea waves on a harbour wall, the transport of sloshing fluids in partly filled containers, and the design of micronozzles for high speed ink-jet printing. Apart from the intrinsic mathematical challenge in describing and solving the governing equations, there are usually important environmental, safety and engineering features which need to be analysed and controlled. A rich variety of techniques has been developed over the past two decades to facilitate this analysis; singular perturbations, dynamical systems, and the development of sophisticated numerical codes. The extreme and sometimes violent nature of some free surface flows taxes these methods to the limit. The work presented at the symposium addressed these limits and can be loosely classified into four areas: (i) Axisymmetric free surface flows. There are a variety of problems in the printing, glass, fertiliser and fine chemical industries in which threads of fluid are made and controlled. Presentations were made in the areas of pinch-off for inviscid and viscous threads of fluid, recoil effects after droplet formation and the control of instability by forced vibration. (ii) Dynamic wetting. The motion of three phase contact lines, which are formed at the junction between two fluids and a solid, plays an important role in fluid mechanics.
Download or read book Manipulation of Nanoscale Materials written by Katsuhiko Ariga and published by Royal Society of Chemistry. This book was released on 2012 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques and strategies for the production of nanomaterials and nanostructures have developed to an advanced level. With contributions from across the globe, this resource presents a broad spectrum of nanomaterials and their applications.
Download or read book Lithography Process Control written by Harry J. Levinson and published by SPIE Press. This book was released on 1999 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers lithography process control at several levels, from fundamental through advanced topics. The book is a self-contained tutorial that works both as an introduction to the technology and as a reference for the experienced lithographer. It reviews the foundations of statistical process control as background for advanced topics such as complex processes and feedback. In addition, it presents control methodologies that may be applied to process development pilot lines.
Download or read book Alternative Lithography written by Clivia M. Sotomayor Torres and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good old Gutenberg could not have imagined that his revolutionary printing concept which so greatly contributed to dissemination of knowledge and thus today 's wealth, would have been a source of inspiration five hundred years later. Now, it seems intuitive that a simple way to produce a large number of replicates is using a mold to emboss pattern you need, but at the nanoscale nothing is simple: the devil is in the detail. And this book is about the "devil". In the following 17 chapters, the authors-all of them well recognized and active actors in this emerging field-describe the state-of-the-art, today 's technological bottlenecks and the prospects for micro-contact printing and nanoimprint lithography. Many results of this book originate from projects funded by the European Com mission through its "Nanotechnology Information Devices" (NID) initiative. NID was launched with the objective to develop nanoscale devices for the time when the red brick scenario of the ITRS roadmap would be reached. It became soon clear however, that there was no point to investigate only alternative devices to CMOS, but what was really needed was an integrated approach that took into account more facets of this difficult undertaking. Technologically speaking , this meant to have a coherent strategy to develop novel devices, nanofabrication tools and circuit & system architectures at the same time.
Download or read book Advanced Processes for 193 nm Immersion Lithography written by Yayi Wei and published by SPIE Press. This book was released on 2009 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to advanced processes and materials used in 193-nm immersion lithography (193i). It is an important text for those new to the field as well as for current practitioners who want to broaden their understanding of this latest technology. The book can be used as course material for graduate students of electrical engineering, material sciences, physics, chemistry, and microelectronics engineering and can also be used to train engineers involved in the manufacture of integrated circuits. It provides techniques for selecting critical materials (topcoats, photoresists, and antireflective coatings) and optimizing immersion processes to ensure higher performance and lower defectivity at lower cost. This book also includes sections on shrinking, trimming, and smoothing of the resist pattern to reduce feature sizes and line-edge roughness. Finally, it describes the recent development of 193i in combination with double exposure and double patterning.
Download or read book Coating and drying processes for functional films in polymer solar cells from laboratory to pilot scale written by Wengeler, Lukas and published by KIT Scientific Publishing. This book was released on 2014-05-05 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer solar cells can be produced by a continuous low cost coating and drying process. This work details a specialized experimental set-up to enable large scale roll to roll processing. Material properties such as surface energy, surface tension, and viscosity are presented and modelled. The impact of coating method, as well as process parameters (e.g. coating speed, shear rate, solvent composition) on process stability and film properties, is discussed.
Download or read book Progress in Industrial Mathematics at ECMI 2000 written by Angelo M. Anile and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Realizing the need of interaction between universities and research groups in industry, the European Consortium for Mathematics in Industry (ECMI) was founded in 1986 by mathematicians from ten European universities. Since then it has been continuously extending and now it involves about all Euro pean countries. The aims of ECMI are • To promote the use of mathematical models in industry. • To educate industrial mathematicians to meet the growing demand for such experts. • To operate on a European Scale. Mathematics, as the language of the sciences, has always played an im portant role in technology, and now is applied also to a variety of problems in commerce and the environment. European industry is increasingly becoming dependent on high technology and the need for mathematical expertise in both research and development can only grow. These new demands on mathematics have stimulated academic interest in Industrial Mathematics and many mathematical groups world-wide are committed to interaction with industry as part of their research activities. ECMI was founded with the intention of offering its collective knowledge and expertise to European Industry. The experience of ECMI members is that similar technical problems are encountered by different companies in different countries. It is also true that the same mathematical expertise may often be used in differing industrial applications.
