Download or read book Spectroscopy in Heterogeneous Catalysis written by W. Nicholas Delgass and published by . This book was released on 1979 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy in Heterogeneous Catalysis ...
Download or read book Spectroscopy in Heterogeneous Catalysis written by W Delgass and published by Elsevier. This book was released on 2012-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy in Heterogeneous Catalysis deals with the applications of spectroscopy in heterogeneous catalysis. The concepts and capabilities of a particular technique, experimental procedures, and examples of all proven or potentially important applications are discussed. The use of spectroscopic measurements in guiding empirical approaches to applied problems and to fundamental studies of the chemical identity of catalytic surfaces is also described. This book is comprised of eight chapters and begins with a discussion on the scope of spectroscopy in catalysis and applications of spectroscopy to zeolite catalysts. The following chapters focus on infrared spectroscopy, with emphasis on the theory and interpretation of infrared spectra; Raman spectroscopy and the theory of the Raman effect; diffuse reflectance and photoacoustic spectroscopies; and Mössbauer spectroscopy. Electron spin resonance spectroscopy and nuclear magnetic resonance spectroscopy are also considered. The final chapter is devoted to X-ray photoelectron spectroscopy (XPS) and its application to core electrons, along with the experimental equipment and procedures used. The applications of XPS to studies of surface behavior and catalyst composition and chemistry are outlined. This monograph will be a useful resource for physicists, researchers, and potential researchers in heterogeneous catalysis.
Download or read book Spectroscopy in Catalysis written by J. W. Niemantsverdriet and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superbly organized and of great pedagogic value, 'Spectroscopy in Catalysis' describes the most important modern analytical techniques used to investigate catalytic surfaces. These include electron, ion, and vibrational spectroscopy, mass spectrometry, temperature-programmed techniques, diffraction, and microscopy. With the focus on practical use, rather than theory, each chapter presents current applications to illustrate the type of information that the technique provides and evaluates its possibilities and limitations, allowing selection of the best catalyst and the correct technique to solve a given problem. This third edition includes significant new developments and case studies, with all the chapters updated by way of recent examples and relevant new literature. For students and for everyone who wants a digestible introduction to catalyst characterization. From reviews of the previous editions: 'This is a truly valuable book ... very useful for industrial practitioners who need to be aware of the type of information that can be obtained from modern surface spectroscopies .... The book has a superb pedagogic value...' Journal of Catalysis '... this is an excellent text on spectroscopies in catalysis and I highly recommend it for ... introductory courses on heterogeneous catalysis or as a general introductory monograph.' Journal of the American Chemical Society
Download or read book In situ Characterization of Heterogeneous Catalysts written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2013-04-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps researchers develop new catalysts for sustainable fueland chemical production Reviewing the latest developments in the field, this bookexplores the in-situ characterization of heterogeneous catalysts,enabling readers to take full advantage of the sophisticatedtechniques used to study heterogeneous catalysts and reactionmechanisms. In using these techniques, readers can learn to improvethe selectivity and the performance of catalysts and how to preparecatalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts featurescontributions from leading experts in the field of catalysis. Itbegins with an introduction to the fundamentals and thencovers: Characterization of electronic and structural properties ofcatalysts using X-ray absorption fine structure spectroscopy Techniques for structural characterization based on X-raydiffraction, neutron scattering, and pair distribution functionanalysis Microscopy and morphological studies Techniques for studying the interaction of adsorbates withcatalyst surfaces, including infrared spectroscopy, Ramanspectroscopy, EPR, and moderate pressure XPS Integration of techniques that provide information on thestructural properties of catalysts with techniques that facilitatethe study of surface reactions Throughout the book, detailed examples illustrate how techniquesfor studying catalysts and reaction mechanisms can be applied tosolve a broad range of problems in heterogeneous catalysis.Detailed figures help readers better understand how and why thetechniques discussed in the book work. At the end of each chapter,an extensive set of references leads to the primary literature inthe field. By explaining step by step modern techniques for the in-situcharacterization of heterogeneous catalysts, this book enableschemical scientists and engineers to better understand catalystbehavior and design new catalysts for green, sustainable fuel andchemical production.
Download or read book In situ Spectroscopy in Heterogeneous Catalysis written by James F. Haw and published by Wiley-VCH Verlag GmbH. This book was released on 2002 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Not using in-situ methods to examine catalytic processes is like studying a life with access only to the prenatal and postmortem states." This quote from the world renowned specialist in the field of in situ methods, Gabor A. Somorjai, clearly emphasizes the importance of these techniques in understanding heterogeneous catalysis - a type of chemical reaction used nowadays for most chemically produced supplies and fuels. Yet the fundamental mechanisms are often still not completely understood. Many of the leading scientists in the field have contributed to this book which provides an overview of the most varied spectroscopic and related methods for studying catalytic structures and their functions during a chemical reaction. While primarily written for users of these methods, this is also a valuable aid to interpreting the phenomena observed. Indispensable for everyone working in the field.
Download or read book Operando Research in Heterogeneous Catalysis written by Joost Frenken and published by Springer. This book was released on 2016-12-26 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the emerging field of techniques for visualizing atomic-scale properties of active catalysts under actual working conditions, i.e. high gas pressures and high temperatures. It explains how to understand these observations in terms of the surface structures and dynamics and their detailed interplay with the gas phase. This provides an important new link between fundamental surface physics and chemistry, and applied catalysis. The book explains the motivation and the necessity of operando studies, and positions these with respect to the more traditional low-pressure investigations on the one hand and the reality of industrial catalysis on the other. The last decade has witnessed a rapid development of new experimental and theoretical tools for operando studies of heterogeneous catalysis. The book has a strong emphasis on the new techniques and illustrates how the challenges introduced by the harsh, operando conditions are faced for each of these new tools. Therefore, one can also read this book as a collection of recipes for the development of operando instruments. At present, the number of scientific results obtained under operando conditions is still limited and mostly focused on a simple test reaction, the catalytic oxidation of CO. This reaction thus forms a natural binding element between the chapters, linking the demonstrations of new techniques, and also connecting the theoretical and experimental studies. Some first results on other reactions are also presented. If there is one thing that can be concluded already in this early stage, it is that the catalytic conditions themselves can have dramatic effects on the structure and composition of the surfaces of catalysts, which, in turn can greatly affect the mechanisms, the activity, and the selectivity of the chemical reactions that they catalyze.
Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book Heterogeneous Catalysts for Clean Technology written by Karen Wilson and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive, but not a reactant. Heterogeneous catalysts play an unseen role in many of today's processes and products. With the increasing emphasis on sustainability in both products and processes, this handbook is the first to combine the hot topics of heterogeneous catalysis and clean technology. It focuses on the development of heterogeneous catalysts for use in clean chemical synthesis, dealing with how modern spectroscopic techniques can aid the design of catalysts for use in liquid phase reactions, their application in industrially important chemistries - including selective oxidation, hydrogenation, solid acid- and base-catalyzed processes - as well as the role of process intensification and use of renewable resources in improving the sustainability of chemical processes. With its emphasis on applications, this book is of high interest to those working in the industry.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Applications of Mossbauer Spectroscopy written by Richard L. Cohen and published by Elsevier. This book was released on 2012-12-02 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Mössbauer Spectroscopy, Volume I is a collection of essays that discusses the research performed using Mössbauer spectroscopy. The book presents the effect of some stabilizers of polyethylene. It demonstrates the polymerization processes and structure of catalytically active centers. The text also describes the chemical processes in butyl rubber vulcanization. It discusses the experimental studies of iron transport proteins and the thermal decomposition of solids. The section that follows describes the paramagnetic hyperfine structure. The book will provide valuable insights for scientists, chemists, students, and researchers in the field of organic chemistry.
Download or read book Characterization of Heterogeneous Catalysts written by Francis Delannay and published by Marcel Dekker. This book was released on 1984 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterogeneous Catalysis and its Industrial Applications written by Martin Schmal and published by Springer. This book was released on 2016-10-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to introduce the basic concepts involved in industrial catalytic processes. It is profusely illustrated with experimental results with the main objective of guiding how to select a suitable catalyst for specific processes. The book is divided in two parts. In the first part the basic concepts are addressed, regarding the existing theories, activity patterns and adsorption-desorption phenomena. In the second part the key experimental methods for the physicochemical characterization of catalysts are presented, as well as the currently used catalyst pre and post treatments. The last chapter describes some important in situ characterization techniques (e.g. XPS and TEM) and surface model patterns related to surface modifications occurring during the reaction. Thoroughly illustrated with microscopy images, spectroscopy data and schematics of reaction mechanisms, the book provides a powerful learning tool for students in undergraduate and graduate level courses on the field of catalysis. Exercises and resolved problems are provided, as well as experimental procedures to support laboratory classes. Furthermore, the content is presented in a carefully chosen sequence, reflecting the 30 year teaching experience of the author. The author, Professor Martin Schmal, sees the present book as a way of conveying basic knowledge needed for the development of more efficient catalysts (i.e. nanostructured materials) and novel industrial chemical processes in the fields of environmental chemistry, fine chemistry, hydrotreating of heavy oils, hydrogen production and biomass processing.
Download or read book Sustainable Organic Synthesis written by Dr Stefano Protti and published by Royal Society of Chemistry. This book was released on 2021-10-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen huge growth in the area of sustainable chemistry. In order to meet the chemical needs of the global population whilst minimising impacts on health and the environment it is essential to keep reconsidering and improving synthetic processes. Sustainable Organic Synthesis is a comprehensive collection of contributions, provided by specialists in Green Chemistry, covering topics ranging from catalytic approaches to benign and alternative reaction media, and innovative and more efficient technologies.
Download or read book Heterogeneous Catalysis written by Giovanni Palmisano and published by Elsevier. This book was released on 2022-01-08 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.320 pages Approx.320 pages
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more Includes characterization methods and lists all catalytic behavior of the solid state catalysts Discusses new developments in nanocatalysts and their advantages over conventional catalysts
Download or read book Handbook of Spectroscopy written by G¿nter Gauglitz and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a straightforward introduction to spectroscopy, showing what it can do and how it does it, together with a clear, integrated and objective account of the wealth of information that can be derived from spectra. The sequence of chapters covers a wide range of the electromagnetic spectrum, and the physical processes involved, from nuclear phenomena to molecular rotation processes. - A day-by-day laboratory guide: its design based on practical knowledge of spectroscopists at universities, industries and research institutes - A well-structured information source containing methods and applications sections framed by sections on general topics - Guides users to a decision about which spectroscopic method and which instrumentation will be the most appropriate to solve their own practical problem - Rapid access to essential information - Correct analysis of a huge number of measured spectra data and smart use of such information sources as databases and spectra libraries
