Download or read book Spectroscopy in Catalysis written by J. W. Niemantsverdriet and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superbly organized and of great pedagogic value, 'Spectroscopy in Catalysis' describes the most important modern analytical techniques used to investigate catalytic surfaces. These include electron, ion, and vibrational spectroscopy, mass spectrometry, temperature-programmed techniques, diffraction, and microscopy. With the focus on practical use, rather than theory, each chapter presents current applications to illustrate the type of information that the technique provides and evaluates its possibilities and limitations, allowing selection of the best catalyst and the correct technique to solve a given problem. This third edition includes significant new developments and case studies, with all the chapters updated by way of recent examples and relevant new literature. For students and for everyone who wants a digestible introduction to catalyst characterization. From reviews of the previous editions: 'This is a truly valuable book ... very useful for industrial practitioners who need to be aware of the type of information that can be obtained from modern surface spectroscopies .... The book has a superb pedagogic value...' Journal of Catalysis '... this is an excellent text on spectroscopies in catalysis and I highly recommend it for ... introductory courses on heterogeneous catalysis or as a general introductory monograph.' Journal of the American Chemical Society
Download or read book Spectroscopy in Heterogeneous Catalysis written by W. Nicholas Delgass and published by . This book was released on 1979 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy in Heterogeneous Catalysis ...
Download or read book Spectroscopy in Catalysis written by J. W. Niemantsverdriet and published by Wiley-VCH. This book was released on 1993-07-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both textbook and monograph, 'Spectroscopy in Catalysis' describes the most important modern analytical techniques used to investigate catalysts or related systems, such as thin films and single crystals that are used to model catalytic surfaces. These techniques include electron spectroscopies (XPS, UPS, AES, EELS), ion spectroscopies (SIMS, SNMS, RBS, LEIS), vibrational spectroscopies (infrared and Raman spectroscopy, EELS), mass spectroscopic and temperature programmed techniques (TPR, TPO, TDS), diffraction (XRD, LEED, EXAFS), and microscopy (TEM, SEM, STEM, STM, AFM, FEM and FIM). Like a monograph, it covers recent research. Like a textbook, it offers numerous graphics to explain the basics of each spectroscopic technique. Each chapter provides current applications to illustrate the type of information that the technique provides and evaluates the possibilities and limitations of the technique. 'This is a truly valuable book ... particularly attractive for students starting their research in catalysis ... has a superb pedagogic value.' Journal of Catalysis
Download or read book Spectroscopy in Heterogeneous Catalysis written by W Delgass and published by Elsevier. This book was released on 2012-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy in Heterogeneous Catalysis deals with the applications of spectroscopy in heterogeneous catalysis. The concepts and capabilities of a particular technique, experimental procedures, and examples of all proven or potentially important applications are discussed. The use of spectroscopic measurements in guiding empirical approaches to applied problems and to fundamental studies of the chemical identity of catalytic surfaces is also described. This book is comprised of eight chapters and begins with a discussion on the scope of spectroscopy in catalysis and applications of spectroscopy to zeolite catalysts. The following chapters focus on infrared spectroscopy, with emphasis on the theory and interpretation of infrared spectra; Raman spectroscopy and the theory of the Raman effect; diffuse reflectance and photoacoustic spectroscopies; and Mössbauer spectroscopy. Electron spin resonance spectroscopy and nuclear magnetic resonance spectroscopy are also considered. The final chapter is devoted to X-ray photoelectron spectroscopy (XPS) and its application to core electrons, along with the experimental equipment and procedures used. The applications of XPS to studies of surface behavior and catalyst composition and chemistry are outlined. This monograph will be a useful resource for physicists, researchers, and potential researchers in heterogeneous catalysis.
Download or read book In situ Spectroscopy of Catalysts written by Bert M. Weckhuysen and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weckhuysen (inorganic chemistry and catalysis, Utrecht University, The Netherlands) covers a range of analytical techniques for investigating the active site and the related reaction mechanism in a working catalyst, offering an overview of the possibilities and limitations of these analytical techniques and covering the latest developments in the field. Techniques are divided into sections on in situ vibrational spectroscopy, in situ X-ray absorption spectroscopy, in situ magnetic resonance techniques, and other in situ characterization techniques. The book is for chemists and chemical engineers. Annotation :2005 Book News, Inc., Portland, OR (booknews.com).
Download or read book Molecular Spectroscopy of Oxide Catalyst Surfaces written by Anatoli Davydov and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the study of transition metal complexes in solution, molecular spectroscopic methods - principally the infrared, ultraviolet/visible and electron spin resonance spectroscopies - have played key roles in establishing the concepts of coordination chemistry occurring at the surfaces of solids. This book describes the development of the principals of coordination chemistry of oxide surfaces using analyses of data obtained by these methods. The nature, properties, concentration of the surface adsorption centers and their influence on the character of interaction with different molecules are investigated. The book commences with an account of the basic theoretical principles and experimental techniques of the various spectroscopy methods, with special attention devoted to in situ measurements where the oxide or catalyst sample is in contact with the adsorbate or the reactant. A detailed account is presented of the methods for characterizing the oxidation state and degree of coordination of surface cations and oxygen anions by the adsorption of probe molecules. The complexation of many inorganic, organometallic and organic molecules with different oxide systems is critically examined, and a classification of formed surface compounds, based on the interaction with definite type of adsorption centers, is given. Possible mechanisms of numerous catalytic reactions, including the transformation of organic molecules over acidic catalysts via the carboionic mechanism, are discussed using the spectroscopic identifications of reaction intermediates. A comprehensive analysis of the literature on the interpretation of the spectra of surface compounds on oxides is presented. This highly illustrated and extensively referenced volume is intended for specialists working in the fields of surface physical chemistry, surface and materials sciences, and adsorption phenomena and is essential reading for those involved in the heterogeneous catalysis by transition metal-oxides.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Applications of EPR and NMR Spectroscopy in Homogeneous Catalysis written by Evgenii Talsi and published by CRC Press. This book was released on 2017-04-07 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews advances in important and practically relevant homogeneous catalytic transformations, such as single-site olefin polymerizations and chemo- and stereo-selective oxidations. Close attention is paid to the experimental investigation of the active sites of catalytic oxidation systems and their mechanisms. Major subjects include the applications of NMR and EPR spectroscopic techniques and data obtained by other physical methods. The book addresses a broad readership and focus on widespread techniques available in labs with NMR and EPR spectrometers.
Download or read book Nanotechnology in Catalysis written by Bert Sels and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the R&D efforts in the field that have resulted in a plethora of novel applications over the past decade, this handbook gives a comprehensive overview of the tangible benefits of nanotechnology in catalysis. By bridging fundamental research and industrial development, it provides a unique perspective on this scientifically and economically important field. While the first three parts are devoted to preparation and characterization of nanocatalysts, the final three provide in-depth insights into their applications in the fine chemicals industry, the energy industry, and for environmental protection, with expert authors reporting on real-life applications that are on the brink of commercialization. Timely reading for catalytic chemists, materials scientists, chemists in industry, and process engineers.
Download or read book Spectroscopy in Catalysis written by J. W. Niemantsverdriet and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Spectroscopy in Catalysis' describes the most important modern analytical techniques used to investigate catalytic surfaces. These include electron spectroscopy (XPS, UPS, AES, EELS), ion spectroscopy (SIMS, SNMS, RBS, LEIS), vibrational spectroscopy (infrared, Raman, EELS), temperature-programmed techniques (TPR, TPO, TDS), diffraction (XRD, LEED, EXAFS), and microscopy (TEM, SEM, STEM, STM, AFM, FEM, and FIM). Each chapter uses current applications to illustrate the type of information that the technique provides and evaluates its possibilities and limitations. This second edition includes significant new developments, for example scanning probe microscopies, the imaging and vibrational techniques have been revised, the case studies expanded with an example on polymerization catalysts, and all the other chapters updated with recent examples and relevant new literature. From reviews of the First Edition: 'This is a truly valuable book ... very useful for industrial practitioners who need to be aware of the type of information that can be obtained from modern surface spectroscopies .... The book has a superb pedagogic value...' Journal of Catalysis '... this is an excellent text on spectroscopies in catalysis and I highly recommend it for ... introductory courses on heterogeneous catalysis or as a general introductory monograph.' Journal of the American Chemical Society
Download or read book Vibrational Spectroscopy With Neutrons With Applications In Chemistry Biology Materials Science And Catalysis written by Philip C H Mitchell and published by World Scientific. This book was released on 2005-06-15 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inelastic neutron scattering (INS) is a spectroscopic technique in which neutrons are used to probe the dynamics of atoms and molecules in solids and liquids. This book is the first, since the late 1960s, to cover the principles and applications of INS as a vibrational-spectroscopic technique. It provides a hands-on account of the use of INS, concentrating on how neutron vibrational spectroscopy can be employed to obtain chemical information on a range of materials that are of interest to chemists, biologists, materials scientists, surface scientists and catalyst researchers. This is an accessible and comprehensive single-volume primary text and reference source.
Download or read book Heterogeneous Catalysts for Clean Technology written by Karen Wilson and published by John Wiley & Sons. This book was released on 2013-09-17 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive, but not a reactant. Heterogeneous catalysts play an unseen role in many of today's processes and products. With the increasing emphasis on sustainability in both products and processes, this handbook is the first to combine the hot topics of heterogeneous catalysis and clean technology. It focuses on the development of heterogeneous catalysts for use in clean chemical synthesis, dealing with how modern spectroscopic techniques can aid the design of catalysts for use in liquid phase reactions, their application in industrially important chemistries - including selective oxidation, hydrogenation, solid acid- and base-catalyzed processes - as well as the role of process intensification and use of renewable resources in improving the sustainability of chemical processes. With its emphasis on applications, this book is of high interest to those working in the industry.
Download or read book In situ Spectroscopy in Heterogeneous Catalysis written by James F. Haw and published by Wiley-VCH Verlag GmbH. This book was released on 2002 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Not using in-situ methods to examine catalytic processes is like studying a life with access only to the prenatal and postmortem states." This quote from the world renowned specialist in the field of in situ methods, Gabor A. Somorjai, clearly emphasizes the importance of these techniques in understanding heterogeneous catalysis - a type of chemical reaction used nowadays for most chemically produced supplies and fuels. Yet the fundamental mechanisms are often still not completely understood. Many of the leading scientists in the field have contributed to this book which provides an overview of the most varied spectroscopic and related methods for studying catalytic structures and their functions during a chemical reaction. While primarily written for users of these methods, this is also a valuable aid to interpreting the phenomena observed. Indispensable for everyone working in the field.
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book NMR Techniques in Catalysis written by Alexis T. Bell and published by CRC Press. This book was released on 1994-02-25 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of the applications of modern solid-state nuclear magnetic resonance (NMR) techniques to the study of catalysts, catalytic processes, species adsorbed on catalysts and systems relevant to heterogeneous catalysis. It characterizes the structure of catalytic materials and surfaces.
Download or read book In situ Characterization of Heterogeneous Catalysts written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2013-04-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps researchers develop new catalysts for sustainable fueland chemical production Reviewing the latest developments in the field, this bookexplores the in-situ characterization of heterogeneous catalysts,enabling readers to take full advantage of the sophisticatedtechniques used to study heterogeneous catalysts and reactionmechanisms. In using these techniques, readers can learn to improvethe selectivity and the performance of catalysts and how to preparecatalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts featurescontributions from leading experts in the field of catalysis. Itbegins with an introduction to the fundamentals and thencovers: Characterization of electronic and structural properties ofcatalysts using X-ray absorption fine structure spectroscopy Techniques for structural characterization based on X-raydiffraction, neutron scattering, and pair distribution functionanalysis Microscopy and morphological studies Techniques for studying the interaction of adsorbates withcatalyst surfaces, including infrared spectroscopy, Ramanspectroscopy, EPR, and moderate pressure XPS Integration of techniques that provide information on thestructural properties of catalysts with techniques that facilitatethe study of surface reactions Throughout the book, detailed examples illustrate how techniquesfor studying catalysts and reaction mechanisms can be applied tosolve a broad range of problems in heterogeneous catalysis.Detailed figures help readers better understand how and why thetechniques discussed in the book work. At the end of each chapter,an extensive set of references leads to the primary literature inthe field. By explaining step by step modern techniques for the in-situcharacterization of heterogeneous catalysts, this book enableschemical scientists and engineers to better understand catalystbehavior and design new catalysts for green, sustainable fuel andchemical production.
Download or read book Characterization of Solid Materials and Heterogeneous Catalysts 2 Volume Set written by Michel Che and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.
