Download or read book Basic Tests for Drugs written by World Health Organization and published by World Health Organization. This book was released on 1998 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a step-by-step guide to simple methods for verifying the identity of commonly used pharmaceutical substances and dosage forms. The basic tests described can also be used to detect mislabeled, substandard, or counterfeit products when the labeling or physical attributes give rise to doubt. Intended for use in developing countries, where resources and specialized skills may be scarce, all tests rely on a limited range of easily available reagents and equipment and need not be performed in a fully equipped laboratory or by persons with specialized training in pharmacy or chemistry. The book describes tests for 23 pharmaceutical substances and 58 pharmaceutical dosage forms, most of which are included in the WHO Model List of Essential Drugs. Basic tests for confirming the identity of four commonly used medicinal plant materials are also included. As stressed in the text, these tests, which merely confirm identity, are intended for use as primary screening tools and may need to be followed, in cases of adverse test results, by a full pharmacopoeial analysis. The book opens with a brief description of the importance of basic tests as one of the many steps needed to ensure a supply of safe and effective drugs. Chapter two describes several collections of more sophisticated tests, including volumetric or spectrophotometric analysis and thin-layer chromatography, that can be useful in the primary screening of imported pharmaceutical substances, and dosage forms. Information on how to obtain and use these guides to tests, which have not been published by WHO is also provided. Against this background, the main part of the book sets out test procedures for verifying the identity of selected pharmaceutical substances, pharmaceutical dosage forms, and medicinal plant materials. The book concludes with a cumulative index of test procedures described here and in the related WHO publications "Basic Tests for Pharmaceutical Substances" and "Basic Tests for Pharmaceutical Dosage Forms".
Download or read book Pharmaceutical Quality by Design written by Sarwar Beg and published by Academic Press. This book was released on 2019-03-27 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Quality by Design: Principles and Applications discusses the Quality by Design (QbD) concept implemented by regulatory agencies to ensure the development of a consistent and high-quality pharmaceutical product that safely provides the maximum therapeutic benefit to patients. The book walks readers through the QbD framework by covering the fundamental principles of QbD, the current regulatory requirements, and the applications of QbD at various stages of pharmaceutical product development, including drug substance and excipient development, analytical development, formulation development, dissolution testing, manufacturing, stability studies, bioequivalence testing, risk and assessment, and clinical trials. Contributions from global leaders in QbD provide specific insight in its application in a diversity of pharmaceutical products, including nanopharmaceuticals, biopharmaceuticals, and vaccines. The inclusion of illustrations, practical examples, and case studies makes this book a useful reference guide to pharmaceutical scientists and researchers who are engaged in the formulation of various delivery systems and the analysis of pharmaceutical product development and drug manufacturing process. - Discusses vital QbD precepts and fundamental aspects of QbD implementation in the pharma, biopharma and biotechnology industries - Provides helpful illustrations, practical examples and research case studies to explain QbD concepts to readers - Includes contributions from global leaders and experts from academia, industry and regulatory agencies
Download or read book Frontiers in Statistical Quality Control 8 written by Hans-Joachim Lenz and published by Physica. This book was released on 2006 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume treats the three main categories of Statistical Quality Control: General Aspects of SQC Methodology, On-line Control including Sampling Plans, Control Charts and Monitoring, and Off-line Control including Data Analysis, Calibration and Experimental Design. Experts with international reputation present their newest contributions.
Download or read book Quality Assurance of Aseptic Preparation Services written by Alison M. Beaney and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Assurance of Aseptic Preparation Services Standards Handbook (also known as the Yellow Guide) provides standards for unlicensed aseptic preparation in the UK, as well as practical information to aid implementation of the standards. The handbook delivers essential standards in a practical way and in a format that will be useful for pharmacy management, staff working in aseptic preparation units and those whose role it is to audit the services. The accompanying support resources help with understanding the complexities of relevant topics including microbiology, radiopharmaceuticals, advanced therapy medicinal products, technical (quality) agreements and capacity planning. All the standards have been revised and updated for this 5th edition. The text is produced on behalf of the Royal Pharmaceutical Society (RPS) and the NHS Pharmaceutical Quality Assurance Committee. New in this edition: Replaces the 4th edition standards and forms the basis for an ongoing audit program in the NHS Many new and revised standards Greater emphasis on Pharmaceutical Quality Systems; the responsibilities of pharmacy management, Chief Pharmacists (or equivalent), has been expanded in line with developments in Good Manufacturing Practice Reformatted into 2 parts: standards and support resources. This is a new collaboration between the RPS and NHS. Since the previous edition the RPS has become the professional body for pharmacists and pharmaceutical scientists. RPS launched these standards as part of a library of professional standards and a programme of work to create standards for all areas of pharmacy. The Handbook is essential for pharmacists, hospital pharmacy management and technical services teams, and auditors of unlicensed NHS hospital pharmacy aseptic preparation services in the UK, pharmacists and regulators. The text is used to inform standards used in several other countries.
Download or read book Quality Control Methods for Medicinal Plant Materials written by World Health Organization and published by World Health Organization. This book was released on 1998 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of test procedures for assessing the identity, purity, and content of medicinal plant materials, including determination of pesticide residues, arsenic and heavy metals. Intended to assist national laboratories engaged in drug quality control, the manual responds to the growing use of medicinal plants, the special quality problems they pose, and the corresponding need for international guidance on reliable methods for quality control. Recommended procedures - whether involving visual inspection or the use of thin-layer chromatography for the qualitative determination of impurities - should also prove useful to the pharmaceutical industry and pharmacists working with these materials.
Download or read book The International Pharmacopoeia written by World Health Organization and published by World Health Organization. This book was released on 2006 with total page 1526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Pharmacopoeia contains a collection of recommended methods for analysis and quality specifications for pharmaceutical substances, excipients and products. This new edition consolidates the texts of the five separate volumes of the third edition and includes new monographs for antiretroviral substances (didanosine, indinavir sulfate, nelfinavir mesilate, nevirapine, ritonavir, saquinovir, and saquinovir mesilate) adopted by the WHO Expert Committee on Specifications for Pharmaceutical Preparations in October 2004. It includes some additions and amendments to the general notices of the Pharmacopoeia, as well as some changes to its layout and format. Volume one contains monographs for pharmaceutical substances A to O and the General Notices; and volume two contains monographs for pharmaceutical substances P to Z, together with those for dosage forms and radiopharmaceutical preparations, the methods of analysis and reagents.
Download or read book Specifications for the Quality Control of Pharmaceutical Preparations written by World Health Organization and published by . This book was released on 1967 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices written by Rosamund M. Baird and published by CRC Press. This book was released on 2000-08-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiologists working in both the pharmaceutical and medical device industries, face considerable challenges in keeping abreast of the myriad microbiological references available to them, and the continuously evolving regulatory requirements. The Handbook of Microbiological Quality Control provides a unique distillation of such material, by provi
Download or read book Quality Assurance of Pharmaceuticals written by World Health Organization and published by World Health Organization. This book was released on 2007 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality assurance of pharmaceutical products is a continuing concern of WHO. Despite efforts made around the world to ensure a supply of quality and effective medicines, substandard, spurious and counterfeit products still compromise health care delivery in many countries. To respond to the global need for adequate quality assurance of pharmaceuticals, WHO's Expert Committee on Specifications for Pharmaceutical Preparations has over the years made numerous recommendations to establish standards and guidelines and to promote the effective functioning of national regulatory and control systems and the implementation of internationally agreed standards by trained personnel. Many of the relevant documents endorsed by the Committee are reproduced in this volume providing guidance covering all aspects of good manufacturing practices (GMP). Important texts on inspection are also included. Most of the material has been published separately in the Expert Committee's reports. This compendium brings it together to make it more accessible and of greater practical value to those working in faculties of pharmacy, in medicines regulation and control and in the pharmaceutical industry. This is the second updated edition of the compendium and includes texts published in 2005 and 2006 in the WHO Technical Report Series.
Download or read book Technical Report Series written by and published by . This book was released on 1950 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Validation of Analytical Methods written by Christopher M. Riley and published by Elsevier. This book was released on 1996-05-29 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to validate an analytical or bioanalytical method is encountered by analysts in the pharmaceutical industry on an almost daily basis, because adequately validated methods are a necessity for approvable regulatory filings. What constitutes a validated method, however, is subject to analyst interpretation because there is no universally accepted industry practice for assay validation. This book is intended to serve as a guide to the analyst in terms of the issues and parameters that must be considered in the development and validation of analytical methods. In addition to the critical issues surrounding method validation, this book also deals with other related factors such as method development, data acquisition, automation, cleaning validation and regulatory considerations. The book is divided into three parts. Part One, comprising two chapters, looks at some of the basic concepts of method validation. Chapter 1 discusses the general concept of validation and its role in the process of transferring methods from laboratory to laboratory. Chapter 2 looks at some of the critical parameters included in a validation program and the various statistical treatments given to these parameters.Part Two (Chapters 3, 4 and 5) of the book focuses on the regulatory perspective of analytical validation. Chapter 3 discusses in some detail how validation is treated by various regulatory agencies around the world, including the United States, Canada, the European Community, Australia and Japan. This chapter also discusses the International Conference on Harmonization (ICH) treatment of assay validation. Chapters 4 and 5 cover the issues and various perspectives of the recent United States vs. Barr Laboratories Inc. case involving the retesting of samples. Part Three (Chapters 6 - 12) covers the development and validation of various analytical components of the pharmaceutical product development process. This part of the book contains specific chapters dedicated to bulk drug substances and finished products, dissolution studies, robotics and automated workstations, biotechnology products, biological samples, analytical methods for cleaning procedures and computer systems and computer-aided validation. Each chapter goes into some detail describing the critical development and related validation considerations for each topic.This book is not intended to be a practical description of the analytical validation process, but more of a guide to the critical parameters and considerations that must be attended to in a pharmaceutical development program. Despite the existence of numerous guidelines including the recent attempts by the ICH to be implemented in 1998, the practical part of assay validation will always remain, to a certain extent, a matter of the personal preference of the analyst or company. Nevertheless, this book brings together the perspectives of several experts having extensive experience in different capacities in the pharmaceutical industry in an attempt to bring some consistency to analytical method development and validation.
Download or read book Practical Pharmaceutics written by Yvonne Bouwman-Boer and published by Springer. This book was released on 2015-08-24 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains essential knowledge on the preparation, control, logistics, dispensing and use of medicines. It features chapters written by experienced pharmacists working in hospitals and academia throughout Europe, complete with practical examples as well as information on current EU-legislation. From prescription to production, from usage instructions to procurement and the impact of medicines on the environment, the book provides step-by-step coverage that will help a wide range of readers. It offers product knowledge for all pharmacists working directly with patients and it will enable them to make the appropriate medicine available, to store medicines properly, to adapt medicines if necessary and to dispense medicines with the appropriate information to inform patients and caregivers about product care and how to maintain their quality. This basic knowledge will also be of help to industrial pharmacists to remind and focus them on the application of the medicines manufactured. The basic and practical knowledge on the design, preparation and quality management of medicines can directly be applied by the pharmacists whose main duty is production in community and hospital pharmacies and industries. Undergraduate as well as graduate pharmacy students will find knowledge and backgrounds in a fully coherent way and fully supported with examples.
Download or read book WHO Expert Committee on Specifications for Pharmaceutical Preparations written by World Health Organization and published by World Health Organization. This book was released on 2022-12-22 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Manufacture of Protein Pharmaceuticals written by Steve L. Nail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this era of biotechnology there have been many books covering the fundamentals of recombinant DNA technology and protein chemistry. However, not many sources are available for the pharmaceutical develop ment scientist and other personnel responsible for the commercialization of the finished dosage forms of these new biopharmaceuticals and other products from biotechnology. This text will help to fill this gap. Once active biopharmaceutical molecules are candidates for clinical trial investigation and subsequent commercialization, a number of other activities must take place while research and development on these molecules continues. The active ingredient itself must be formulated into a finished dosage form that can be conveniently used by health care professionals and patients. Properties of the biopharmaceutical molecule must be clearly understood so that the appropriate finished product formulation can be developed. Finished product formulation development includes not only the chemical formulation, but also the packaging system, the manufacturing process, and appropriate control strategies to assure such good manufacturing practice attributes as safety, identity, strength, purity, and quality.
Download or read book Quality Control Training Manual written by Syed Imtiaz Haider and published by CRC Press. This book was released on 2016-04-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to help companies comply with GMP, GLP, and validation requirements imposed by the FDA and regulatory bodies worldwide, Quality Control Training Manual: Comprehensive Training Guide for API, Finished Pharmaceutical and Biotechnologies Laboratories presents cost-effective training courses that cover how to apply advances in the life sciences
Download or read book WHO Expert Committee on Specifications for Pharmaceutical Preparations written by WHO Expert Committee on Specifications for Pharmaceutical Preparations and published by World Health Organization. This book was released on 2014 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use, in addition to 20 monographs and general texts for inclusion in The International Pharmacopoeia and 11 new International Chemical Reference Substances. The International Pharmacopoeia - updating mechanism for the section on radiopharmaceuticals; WHO good manufacturing practices for pharmaceutical products: main principles; Model quality assurance system for procurement agencies; Assessment tool based on the model quality assurance system for procurement agencies: aide-memoire for inspection; Guidelines on submission of documentation for prequalification of finished pharmaceutical products approved by stringent regulatory authorities; and Guidelines on submission of documentation for a multisource (generic) finished pharmaceutical product: quality part.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.
