Download or read book The Shell Bitumen Industrial Handbook written by and published by Thomas Telford. This book was released on 1995 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials written by Alan Everett and published by Routledge. This book was released on 2014-05-12 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A well-known and respected standard reference, this fifth edition provides a thorough treatment of the properties of building materials and their manufacture, both on-site and in the factory.
Download or read book Construction Materials Reference Book written by David Doran and published by Routledge. This book was released on 2013-07-24 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive reference source for professionals involved in the conception, design and specification stages of a construction project. The theory and practical aspects of each material is covered, with an emphasis being placed on properties and appropriate use, enabling broader, deeper understanding of each material leading to greater confidence in their application. Containing fifty chapters written by subject specialists, Construction Materials Reference Book covers the wide range of materials that are encountered in the construction process, from traditional materials such as stone through masonry and steel to advanced plastics and composites. With increased significance being placed on broader environmental issues, issues of whole life cost and sustainability are covered, along with health and safety aspects of both use and installation.
Download or read book Standards for Aggregates written by D. C. Pike and published by . This book was released on 1990 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Building Technology written by Andrew J. Charlett and published by Routledge. This book was released on 2013-01-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Building Technology introduces the technology, methods, and processes fundamental to construction by focussing on what is involved in building a typical low-rise house. Written with the novice in mind, this textbook is the ideal starting point for any construction student, as it fully supports the reader all the way to understanding the functional requirements of each element of the building, and how to take these into account through the building process itself. This second edition is expanded to cover even more relevant topics, and is supported by more resources for use by the student and lecturer. Now included are: An introduction to the planning process and the building regulations How to incorporate a sustainable approach, in the selection of materials and elsewhere A companion site with lecturer’s answers manual and illustrated lecture notes 150 labelled diagrams throughout the book, and multiple self-study questions in every chapter A students’ section of the companion site with multiple choice quizzes and 250 full-colour photos linked to chapters of the book Concise, focussed and the most student-friendly guide to this topic available, Fundamental Building Technology is the perfect textbook for those taking construction technology modules at undergraduate or HNC/HND level.
Download or read book Principles of Element Design written by Peter Rich and published by Routledge. This book was released on 2012-10-02 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of buildings is learnt through experience and the inheritance of a tradition in forming buildings over several thousand years. Successful construction learns from this experience which becomes embodied in principles of application. Though materials and techniques change, various elements have to perform the same function. 'Principles of Element Design' identifies all the relevant elements and then breaks these elements down into all their basic constituents, making it possible for students to fully understand the given theory and principles behind each part. As all building projects are subject to guidance through the Building Regulations and British Standards, this book gives an immediate reference back to relevant information to help practitioners and contractors identify key documents needed. Yvonne Dean B.A. (Hons) B.A (Open) RIBA, an architect, energy consultant and materials technologist. She also has 15 years experience as a lecturer, travels widely and is a guest lecturer at many universities. She pioneered an access course for Women into Architecture and Building, which has been used as a template by others, and has been instrumental in helping to change the teaching of technology for architects and designers. Peter Rich AA Dipl. (Hons) Architect, started his career with 14 years experience as a qualified architectural technician. He then joined the AA School of Architecture, working with Bill Allen and John Bickerdike after his graduation, later becoming a partner of Bickerdike Allen Rich and Partners. He also taught building construction at the Bartlett School of Architecture, University College London, and architectural design at the Polytechnic of North London. He now acts as a Consultant.
Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2007 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork -- Blocks and blockwork -- Lime, cement and concrete -- Timber and timber products -- Ferrous and non-ferrous metals -- Bitumen and flat roofing materials -- Glass -- Ceramic materials -- Stone and cast stone -- Plastics -- Glass-fibre reinforced plastics, cement and gypsum -- Plaster and board materials -- Insulating materials -- Energy-saving materials and components -- Recycled and ecological materials -- Sealants, gaskets and adhesives -- Paints, wood stains, varnishes and colour.
Download or read book Flooring written by Department of Health: Estates and Facilities Division and published by The Stationery Office. This book was released on 2006-05-09 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication sets out guidance on the technical design and output specifications of flooring in healthcare buildings, and although it is mainly concerned with new building work, the information is also applicable to the renewal of flooring in existing buildings.
Download or read book External Components written by Michael Mcevoy and published by Routledge. This book was released on 2014-06-03 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyses, in conjunction with Internal Components, the performance requirements of building components and the effectiveness of typical solutions. External components integrates logically with the theoretical aspects explored in other titles in the Mitchell's building series. It encourages evaluation of alternative methods for putting components together.
Download or read book HAPM Component Life Manual written by Hapm Publications Ltd. and published by CRC Press. This book was released on 2020-10-28 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication breaks new ground. It is the first document to provide extensive life-span assessments (for insurance purposes) for a wide range of building components which are classified within the concept of quality specifications. A further benefit is that it does not seek to be prescriptive. It indicative 'benchmarks' against which new or differing specifications can be assessed, in that sense it is both robust and flexible.
Download or read book Asphalts in Road Construction written by Robert N Hunter and published by Thomas Telford. This book was released on 2000-09 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a useful guide to all facets of asphalt technology as applied to the construction and maintenance of highways and reflects the very best of UK asphalt and pavement technology. It covers all aspects of fully flexible road construction from foundation design through to surface treatment. The book also covers new materials.
Download or read book Building Technology written by Ivor H. Seeley and published by Bloomsbury Publishing. This book was released on 1995-11-11 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes and examines the constructional techniques, choice and use of materials and the statutory requirements for domestic buildings. The text is generously supported by more than 60 pages of drawings and sketches. It is aimed at first and second year students in a wide variety of disciplines.
Download or read book Spon s Landscape Handbook written by Derek Lovejoy Partnership and published by Taylor & Francis. This book was released on 1997 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years after the 3rd edition this handbook has been totally rewritten to take into account legislative changes, the use of CAD techniques and new British Standards.
Download or read book Guide to Defect Avoidance written by Hapm Publications Ltd. and published by CRC Press. This book was released on 2001-03-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing together in a unique and practical way much tried-and-tested information, the Guide to Defect Avoidance is essential reading for busy designers and contractors, those engaged in the investigation of building failures, and anyone involved in the procurement and management of low-rise housing of predominantly traditional construction. Using full colour illustrations, the Guide lists and describes a wide range of construction defects, selected and rated by Construction Audit Ltd. on the basis of a decade of experience gained in auditing the construction of over 4,000 newbuild housing schemes. Each defect is clearly related to its potential consequences before being presented in the context of a `problem' and how it may be avoided. Common mistakes are highlighted and the reader directed to an extensive range of further reading.
Download or read book Clerk of Works and Site Inspector Handbook written by The Institute of Clerks of Works and Construction Inspectorate and published by Routledge. This book was released on 2019-07-25 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the popular handbook is a practical companion for Clerks of Works, Site Inspectors and anyone with the responsibility of managing construction works on site. Clerk of Works and Site Inspector Handbook, 2018 edition the book explains the traditional site inspector/clerk of works role and their liabilities, as well as duties and responsibilities linked to a more contemporary construction setting. It explores the relationship between inspectors, architects and other construction professionals, whilst providing valuable insight into reporting and what to look for, check and test every step of the way. It's an essential reference book for Clerks of Works and Site Inspectors, containing important lessons for newly qualified architects, those who carry out site inspections or act as resident site architects and Part 3 students.
Download or read book AJfocus written by and published by . This book was released on 1990 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Masonry Designer s Handbook written by Anton Fried and published by CRC Press. This book was released on 2014-04-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of a well-known and respected book. This book provides a thorough guide for structural engineers on the use of concrete masonry. The second edition of the Concrete Masonry Designer's Handbook is the only handbook to provide information on all the new CEN TC125 masonry standards, as well as detailed guidance on design to Eurocode 6. Th
