Download or read book Thin Walled Structures written by J.Y. Richard Liew and published by Elsevier. This book was released on 1998-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-plated structures are used extensively in building construction, automobile, aircraft, shipbuilding and other industries because of a number of favourable factors such as high strength-weight ratio, development of new materials and processes and the availability of efficient analytical methods. This class of structure is made by joining thin plates together at their edges and they rely for their rigidity and strength upon the tremendous stiffness and load-carrying capacity of the flat plates from which they are made. Many of the problems encountered in these structures arise because of the effects of local buckling. The knowledge of various facets of this phenomenon has increased dramatically since the 1960s. Problem areas which were hitherto either too complex for rigorous analysis or whose subtleties were not fully realized have in these years been subjected to intensive study. Great advances have been made in the areas of inelastic buckling. The growth in use of lightweight strong materials, such as fibre-reinforced plastics has also been a contributory factor towards the need for advances in the knowledge of the far post-buckling range. The conference is a sequel to the international conference organised by the University of Strathclyde in December 1996 and this international gathering will provide the opportunity for discussion of recent developments and trends in design of thin-walled structures.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Publication written by and published by . This book was released on 1972 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Steel Structures ICASS 99 written by Siu-Lai Chan and published by Elsevier. This book was released on 1999-12-01 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes of proceedings contain 9 invited keynote papers and 126 contributed papers to be presented at the Second International Conference on Advances in Steel Structures held on 15-17 December 1999 in Hong Kong. The conference is a sequel to the International Conference on Advances in Steel Structures held in Hong Kong in December 1996. The conference will provide a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. The papers to be presented at the conference cover a wide spectrum of topics and were contributed from over 15 countries around the world. They report the current state-of-the art and point to future directions of structural steel research.
Download or read book Concrete Buildings in Seismic Regions Second Edition written by George Penelis and published by CRC Press. This book was released on 2018-10-04 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete (R/C) is one of the main building materials used worldwide, and an understanding of its structural performance under gravity and seismic loads, albeit complex, is crucial for the design of cost effective and safe buildings.Concrete Buildings in Seismic Regions comprehensively covers of all the analysis and design issues related
Download or read book Analysis and Design of Plated Structures written by N.E. Shanmugam and published by Woodhead Publishing. This book was released on 2006-04-28 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and other types of plated structures are used in a variety of applications from aircrafts to ships and offshore platforms to bridges, power plants and cranes. A key issue in the use of these structures is their stability behaviour under compressive stress. Analysis and design of plated structures reviews the wealth of research in this important area and its implications for design, safety and maintenance.The book considers the various types of buckling that plated structures are likely to encounter. Chapters also review buckling in a range of materials from steel to differing types of composite. The book also discusses the behaviour of differing types of components used in steel-plated structures. These components include steel beams and columns as well as curved, stiffened, corrugated, laminated and other types of plate design.With its distinguished editors and international team of contributors, Analysis and design of plated structures is a useful standard reference for civil engineers involved in the design of plated structures. - Discusses the behaviour of steel and other plated structures when under stress - Extensive coverage of the key research in this important area - Compiled by an international team of distinguished contributors
Download or read book Building with Reclaimed Components and Materials written by William Addis and published by Routledge. This book was released on 2006 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2006. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book Construction Materials written by Peter Domone and published by CRC Press. This book was released on 2010-06-10 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: So far in the twenty-first century, there have been many developments in our understanding of materials’ behaviour and in their technology and use. This new edition has been expanded to cover recent developments such as the use of glass as a structural material. It also now examines the contribution that material selection makes to sustainable construction practice, considering the availability of raw materials, production, recycling and reuse, which all contribute to the life cycle assessment of structures. As well as being brought up-to-date with current usage and performance standards, each section now also contains an extra chapter on recycling. Covers the following materials: metals concrete ceramics (including bricks and masonry) polymers fibre composites bituminous materials timber glass. This new edition maintains our familiar and accessible format, starting with fundamental principles and continuing with a section on each of the major groups of materials. It gives you a clear and comprehensive perspective on the whole range of materials used in modern construction. A must have for Civil and Structural engineering students, and for students of architecture, surveying or construction on courses which require an understanding of materials.
Download or read book Building with Reclaimed Components and Materials written by Bill Addis and published by Routledge. This book was released on 2012-05-16 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in green and sustainable design is growing throughout the world. Both national and local governments are active in promoting reuse and recycling in order to reduce the amount of waste going to landfill. This guide identifies how building designers and constructors can minimize the generation of waste at the design stage of a building project by using reclaimed components and materials. Authoritative, accessible and much-needed, this book highlights the opportunities for using reclaimed components and materials and recycled-content building products for each element of a building, from structure and foundations to building services and external works. Current experience is illustrated with international case studies and practical advice. It discusses different approaches to designing with recycling in mind, and identifies the key issues to address when specifying reclaimed components and recycled materials in construction work. This book will be invaluable for building professionals including architects, specifiers, structural and service engineers, quantity surveyors, contractors and facilities managers as well as students of architecture and civil engineering. Published with NEF
Download or read book IMF Staff Papers Volume 50 Special Issue IMF Third Annual Research Conference written by Mr.Robert P. Flood and published by International Monetary Fund. This book was released on 2003-08-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper discusses a model in which growth is a negative function of fiscal burden. Moreover, growth discontinuously switches from high to low as the fiscal burden reaches a critical level. The paper provides an overview of key elements of corporate bankruptcy codes and practice around the world that are relevant to the debate on sovereign debt restructuring. It also describes the broad trends in international financial integration for a sample of industrial countries and explains the cross-country and time-series variation in the size of international balance sheets.
Download or read book Practical Building Conservation written by and published by Ashgate Publishing, Ltd.. This book was released on 2012 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great deal of research and literature has been produced on repairing concrete structures, but very little aimed at conserving the character or appearance of historic examples. This volume offers guidance as to how that should be done. It includes a brief history of the use of the material and explains the criteria for listing, before assessing decay mechanisms and determining appropriate repair strategies.
Download or read book Cold Formed Steel Design written by Wei-Wen Yu and published by John Wiley & Sons. This book was released on 2019-10-29 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the latest AISI North American specifications for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American specification and 2015 North American framing standards, this all-new fifth edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, 5th Edition has been revised and reorganized to incorporate the Direct Strength Method. It discusses the reasons and justification for the various design provisions of the North American specification and framing design standards. It provides chapter coverage of: the types of steels and their most important mechanical properties; the fundamentals of buckling modes; commonly used terms; the design of flexural members, compression members and closed cylindrical tubes, and of beam–columns using ASD, LRFD, and LSD methods; shear diaphragms and shell roof structures; standard corrugated sheets; and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, 5th Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers.
Download or read book Frontier Technologies for Infrastructures Engineering written by Alfredo H.S. Ang and published by CRC Press. This book was released on 2009-04-21 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exclusive collection of papers introducing current and frontier technologies of special significance to the planning, design, construction, and maintenance of civil infrastructures. This volume is intended for professional and practicing engineers involved with infrastructure systems such as roadways, bridges, buildings, power generating and distribution systems, water resources, environmental facilities, and other civil infrastructure systems. Contributions are by internationally renowned and eminent experts, and cover: 1. Life-cycle cost and performance; 2.Reliability engineering; 3. Risk assessment and management; 4. Optimization methods and optimal design; 5. Role of maintenance, inspection, and repair; 6. Structural and system health monitoring; 7. Durability, fatigue and fracture; 8. Corrosion technology for metal and R/C structures; 9. Concrete materials and concrete structures.
Download or read book STESSA 2000 Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by CRC Press. This book was released on 2021-07-28 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of developments in the behaviour and design of steel structures in seismic areas. The proceedings look at the analytical and experimental research on the seismic response of steel structures, and cover topics such as global behaviour and codification, design and application.
Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.
Download or read book IAENG Transactions on Engineering Technologies written by Sio-Iong Ao and published by World Scientific. This book was released on 2012 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains revised and extended research articles by prominent researchers. Topics covered include operations research, scientific computing, industrial engineering, electrical engineering, communication systems, and industrial applications. The book offers the state-of-the-art advances in engineering technologies and also serves as an excellent reference work for researchers and graduate students working with/on engineering technologies.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this bestselling handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format and an abundance of worked-out examples give readers numerous step-by-step design procedures. Extensively updated and featuring several new chapters, this volume, Construction and Maintenance, covers construction, inspection, bridge management systems, health monitoring, ratings, strengthening and rehabilitation, life cycle analysis and much more.
