Download or read book Special Issue on PCB Level Signal Integrity Power Integrity and EMC written by Joungho Kim and published by . This book was released on 2010 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Signal and Power Integrity Simplified written by Eric Bogatin and published by Prentice Hall. This book was released on 2017-12-05 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 Practical Guide to Signal Integrity Design—with Revised Content and New Questions and Problems! This book brings together up-to-the-minute techniques for finding, fixing, and avoiding signal integrity problems in your design. Drawing on his work teaching several thousand engineers and graduate students, world-renowned expert Eric Bogatin systematically presents the root causes of all six families of signal integrity, power integrity, and electromagnetic compatibility problems. Bogatin reviews essential principles needed to understand these problems, and shows how to use best design practices and techniques to prevent or address them early in the design cycle. To help test and reinforce your understanding, this new edition adds questions and problems throughout. Bogatin also presents more examples using free tools, plus new content on high-speed serial links, reflecting input from 130+ of his graduate students. • A fully up-to-date introduction to signal integrity and physical design • New questions and problems designed for both students and professional engineers • How design and technology selection can make or break power distribution network performance • Exploration of key concepts, such as plane impedance, spreading inductance, decoupling capacitors, and capacitor loop inductance • Practical techniques for analyzing resistance, capacitance, inductance, and impedance • Using QUCS to predict waveforms as voltage sources are affected by interconnect impedances • Identifying reflections and crosstalk with free animation tools • Solving signal integrity problems via rules of thumb, analytic approximation, numerical simulation, and measurement • Understanding how interconnect physical design impacts signal integrity • Managing differential pairs and losses • Harnessing the full power of S-parameters in high-speed serial link applications • Designing high-speed serial links associated with differential pairs and lossy lines—including new coverage of eye diagrams • Ensuring power integrity throughout the entire power distribution path • Realistic design guidelines for improving signal integrity, and much more For professionals and students at all levels of experience, this book emphasizes intuitive understanding, practical tools, and engineering discipline, rather than theoretical derivation or mathematical rigor. It has earned a well-deserved reputation as the #1 resource for getting signal integrity designs right—first time, every time.

Download or read book High Speed Circuit Board Signal Integrity Second Edition written by Stephen C. Thierauf and published by Artech House. This book was released on 2017-04-30 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated leading-edge circuit design resource offers the knowledge needed to quickly pinpoint transmission problems that can compromise the entire circuit design. This new edition demonstrates how to apply EM theory to solve signal integrity problems with a practical application-oriented approach. Discussing both design and debug issues at gigabit per second data rates, the book serves as a practical reference for projects involving high-speed serial signaling on printed wiring boards. Step-by-step, this book goes from reviewing the essentials of linear circuit theory, to examining practical issues of pulse propagation along lossless and lossy transmission lines. It provides detailed guidelines for crosstalk, attenuation, power supply decoupling, and layer stackup tradeoffs (including pad/antipad tradeoffs). Other key topics include the construction of etched conductors, analysis of return paths and split planes, microstrip and stripline characteristics, and SMT capacitors. Filled with on-the-job-proven examples, this hands-on reference is the book that engineers can turn to time and again to design out and troubleshoot circuit signal loss and impedance problems.

Download or read book Special Issue on Signal Integrity written by and published by . This book was released on 2000 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High speed Circuit Board Signal Integrity written by Stephen C. Thierauf and published by Artech House. This book was released on 2004 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: As circuit boards are increasingly required to transmit signals at higher and higher speeds, signal and power integrity become increasingly crucial. Rules of thumb that you have used over and over again to prevent signal loss no longer apply to these new, high-speed, high-density circuit designs. This leading-edge circuit design resource offers you the knowledge needed to quickly pinpoint transmission problems that can compromise your entire circuit design. Discussing both design and debug issues at gigabit per second data rates, the book serves as a practical reference for your projects involving high-speed serial signaling on printed wiring boards.

Download or read book Special Issue on Signal Integrity written by Resve Saleh and published by . This book was released on 2000 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electromagnetic Compatibility of Integrated Circuits written by Sonia Ben Dhia and published by Springer Science & Business Media. This book was released on 2006-06-04 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic Compatibility of Integrated Circuits: Techniques for Low Emission and Susceptibility focuses on the electromagnetic compatibility of integrated circuits. The basic concepts, theory, and an extensive historical review of integrated circuit emission and susceptibility are provided. Standardized measurement methods are detailed through various case studies. EMC models for the core, I/Os, supply network, and packaging are described with applications to conducted switching noise, signal integrity, near-field and radiated noise. Case studies from different companies and research laboratories are presented with in-depth descriptions of the ICs, test set-ups, and comparisons between measurements and simulations. Specific guidelines for achieving low emission and susceptibility derived from the experience of EMC experts are presented.

Download or read book PCB Currents Enhanced Edition written by Douglas Brooks and published by Prentice Hall. This book was released on 2013-07-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the enhanced eBook version of the printed book. It contains 1 hour and 48 minutes of video conversations and circuit animations from the industry's leading circuit design engineer, Doug Brooks. Today, PCB designers must deal with issues such as crosstalk and EMI–issues that were once associated only with components. This requires electronics knowledge that many PCB designers never gain through formal training. In PCB Currents, renowned PCB designer Douglas Brooks teaches these essentials descriptively, in plain English, with as little reliance on mathematics as possible. Building on his widely praised seminars, Brooks explains what current is, how it flows, and how it reacts. He begins by reviewing the nature of current, and then explains current flow in basic circuits, discusses sources that supply and drive current, and addresses the unique problems associated with current on PCBs. Brooks concludes by thoroughly illuminating signal integrity issues caused by current flow. He offers practical design solutions for each common type of problem, as well as for complex challenges involving very high frequency harmonics and very short wavelengths. The text is written to be accessible and valuable for PCB designers at all levels of experience, whether they have engineering training or not. Finally, in this Enhanced eBook Edition, some videos and animations have been incorporated as an additional benefit. They fall into four categories. First, there is an introductory video at the beginning of the Preface. It is intended to help put the entire book into a perspective. Second, each section has an introductory video that outlines what is contained within that section and, in most cases, the most important points to be discovered in that section. Third, each chapter has its own, short introduction, again highlighting the most important points within the chapter. Finally, in Chapters 17 and 18, we have some animation videos to help explain some dynamic interactions. It is hard to envision what is happening when a signal reflects off the far end of a trace, or when a signal couples into an adjacent trace (crosstalk) as it travels along using just static figures. But an animation video makes these phenomena much easier to understand. These videos are an important benefit available to you, the ebook reader, and one that cannot be incorporated into a print edition.

Download or read book PCB Currents written by Douglas Brooks and published by Prentice Hall. This book was released on 2013-06-13 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plain-English Guide to Electronics and Current Flow for Every PCB Designer Today, PCB designers must deal with issues such as crosstalk and EMI-–issues that were once associated only with components. This requires electronics knowledge that many PCB designers never gain through formal training. In PCB Currents, renowned PCB designer Douglas Brooks teaches these essentials descriptively, in plain English, with as little reliance on mathematics as possible. Building on his widely praised seminars, Brooks explains what current is, how it flows, and how it reacts. He begins by reviewing the nature of current, and then explains current flow in basic circuits, discusses sources that supply and drive current, and addresses the unique problems associated with current on PCBs. Brooks concludes by thoroughly illuminating signal integrity issues caused by current flow. He offers practical design solutions for each common type of problem, as well as for complex challenges involving very high frequency harmonics and very short wavelengths. Coverage includes • Current: its fundamental nature, basic definitions, and key concepts • Five fundamental laws of current, including Kirchoff’s law and Ohm’s law • Basic circuit concepts: resistive circuits, reactive circuits, and impedance • Voltage and current sources: Where electrons come from and why they move • Current-related PCB issues: temperature, transmission lines, reflections, coupled currents, power distribution, skin effect, dielectric losses, and vias • Solutions for signal integrity issues caused by current flow, from on-board inductance and apparent resistance changes to more complex problems The text is written to be accessible and valuable for PCB designers at all levels of experience, whether they have engineering training or not.

Download or read book Signal Integrity and Radiated Emission of High Speed Digital Systems written by Spartaco Caniggia and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques. Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Written by authors with extensive experience in industry and academia. Explains basic conceptual problems from a theoretical and practical point of view by using numerous measurements and simulations. Presents models for mathematical and SPICE-like circuit simulators. Provides examples of using full-wave codes for SI and RE investigations. Companion website containing lists of codes and sample material. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.

Download or read book Modeling and Design of Electromagnetic Compatibility for High Speed Printed Circuit Boards and Packaging written by Xing-Chang Wei and published by CRC Press. This book was released on 2017-09-19 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Design of Electromagnetic Compatibility for High-Speed Printed Circuit Boards and Packaging presents the electromagnetic modelling and design of three major electromagnetic compatibility (EMC) issues related to the high-speed printed circuit board (PCB) and electronic packages: signal integrity (SI), power integrity (PI), and electromagnetic interference (EMI). The emphasis is put on two essential passive components of PCBs and packages: the power distribution network and the signal distribution network. This book includes two parts. Part one talks about the field-circuit hybrid methods used for the EMC modeling, including the modal method, the integral equation method, the cylindrical wave expansion method and the de-embedding method. Part two illustrates EMC design methods and explores the applications of novel metamaterials and two-dimensional materials on traditional EMC problems. This book is designed to enhance worthwhile electromagnetic theory and mathematical methods for practical engineers and to train students with advanced EMC applications.

Download or read book EMC at Component and PCB Level written by Martin O 'Hara and published by Elsevier. This book was released on 1998-04-08 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the knowledge and good design practice for the design or test engineer to take the necessary measures to improve EMC performance and therefore the chance of achieving compliance, early on in the design process. There are many advantages for both the component supplier and consumer, of looking at EMC at component and PCB level. For the suppliers, not only will their products have the competitive edge because they have known EMC performance, but they will be prepared should EMC compliance become mandatory in the future. For consumers it is a distinct advantage to know how a component will behave within a system with regard to EMC.Shows how to achieve EMC compliance early on in the design processProvides the knowledge to trace system EMC performance problemsFollows best design practices

Download or read book MicroSystem Based on SiP Technology written by Suny Li and published by Springer Nature. This book was released on 2022-05-28 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive SiP design guide book. It is divided into three parts: concept and technology, design and simulation, project and case, for a total of 30 chapters. In Part one, the author proposes some new original concepts and thoughts, such as Function Density Law,Si3P and 4D integration. Part one also covers the latest technology of SiP and Advanced Packaging. Part two covers the latest SiP and Advanced Packaging design and simulation technologies, such as wire bonding, multi-step cavity, chip stacking, 2.5D TSV, 3D TSV, RDL, Fan- In, Fan-Out, Flip Chip, Embedded Passive, Embedded Chip, RF design, Rigid-Flex design, 4D SiP design, Multi-layout project and Team design, as well as SI, PI, thermal simulation, electrical verification and physical verification. Based on a real design case, part three introduces the design, simulation and implementation methods of different types of SiP, which has a -important reference significance for the research and development of SiP projects. This book comprehensively and deeply expounds the latest development, design ideas and design methods of contemporary SiP technology from three aspects: concept and technology, design and simulation, project and case. Through the detailed introduction of new concepts, design methods, actual projects and cases, this book describes the whole process of SiP products from the beginning of conception to the final realization and makes readers benefit from it.

Download or read book Power Integrity written by Steven M. Sandler and published by McGraw Hill Professional. This book was released on 2014-07-29 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROVEN TECHNIQUES FOR GENERATING HIGH-FIDELITY MEASUREMENTS Power Integrity: Measuring, Optimizing, and Troubleshooting Power Related Parameters in Electronics Systems provides field-tested techniques for producing high-fidelity measurements using the appropriate equipment. The book thoroughly discusses measurement guidelines, test instrument selection and use, connecting the equipment to the device being tested, and interpreting the acquired data. The latest electronics technologies and their impact on measurement are discussed. Detailed photographs, screenshots, schematics, and equations are included throughout this practical guide. Learn how to accurately measure: Impedance Stability Power supply rejection ratio (PSRR) Reverse transfer and crosstalk Step load response Ripple and noise Edges High-frequency impedance

Download or read book Advanced Signal Integrity for High Speed Digital Designs written by Stephen H. Hall and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: A synergistic approach to signal integrity for high-speed digital design This book is designed to provide contemporary readers with an understanding of the emerging high-speed signal integrity issues that are creating roadblocks in digital design. Written by the foremost experts on the subject, it leverages concepts and techniques from non-related fields such as applied physics and microwave engineering and applies them to high-speed digital design—creating the optimal combination between theory and practical applications. Following an introduction to the importance of signal integrity, chapter coverage includes: Electromagnetic fundamentals for signal integrity Transmission line fundamentals Crosstalk Non-ideal conductor models, including surface roughness and frequency-dependent inductance Frequency-dependent properties of dielectrics Differential signaling Mathematical requirements of physical channels S-parameters for digital engineers Non-ideal return paths and via resonance I/O circuits and models Equalization Modeling and budgeting of timing jitter and noise System analysis using response surface modeling Each chapter includes many figures and numerous examples to help readers relate the concepts to everyday design and concludes with problems for readers to test their understanding of the material. Advanced Signal Integrity for High-Speed Digital Designs is suitable as a textbook for graduate-level courses on signal integrity, for programs taught in industry for professional engineers, and as a reference for the high-speed digital designer.

Download or read book Electromagnetic Interference and Compatibility written by Paolo Stefano Crovetti and published by MDPI. This book was released on 2021-08-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.

Download or read book Signal and Power Integrity simplified written by Eric Bogatin and published by Pearson Education. This book was released on 2010 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the inclusion of the two new hot topics in signal integrity, power integrity and high speed serial links, this book will be the most up to date complete guide to understanding and designing for signal integrity.