Download or read book Advances in Geometric Modeling and Processing written by Falai Chen and published by Springer Science & Business Media. This book was released on 2008-04-07 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Conference on Geometric Modeling and Processing, GMP 2008, held in Hangzhou, China, in April 2008. The 34 revised full papers and 17 revised short papers presented were carefully reviewed and selected from a total of 113 submissions. The papers cover a wide spectrum in the area of geometric modeling and processing and address topics such as curves and surfaces, digital geometry processing, geometric feature modeling and recognition, geometric constraint solving, geometric optimization, multiresolution modeling, and applications in computer vision, image processing, scientific visualization, robotics and reverse engineering.

Download or read book Advances in Geometric Modeling and Processing written by Bernard Mourrain and published by Springer Science & Business Media. This book was released on 2010-06-09 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Geometric Modeling and Processing, GMP 2010, held in Castro Urdiales, Spain, in June 2010. The 20 revised full papers presented were carefully reviewed and selected from a total of 30 submissions. The papers cover a wide spectrum in the area of geometric modeling and processing and address topics such as solutions of transcendental equations; volume parameterization; smooth curves and surfaces; isogeometric analysis; implicit surfaces; and computational geometry.

Download or read book Computer Aided Geometric Design written by Robert E. Barnhill and published by Academic Press. This book was released on 2014-05-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Geometric Design covers the proceedings of the First International Conference on Computer Aided Geometric Design, held at the University of Utah on March 18-21, 1974. This book is composed of 15 chapters and starts with reviews of the properties of surface patch equation and the use of computers in geometrical design. The next chapters deal with the principles of smooth interpolation over triangles and without twist constraints, as well as the graphical representation of surfaces over triangles and rectangles. These topics are followed by discussions of the B-spline curves and surfaces; mathematical and practical possibilities of UNISURF; nonlinear splines; and some piecewise polynomial alternatives to splines under tension. Other chapters explore the smooth parametric surfaces, the space curve as a folded edge, and the interactive computer graphics application of the parametric bi-cubic surface to engineering design problems. The final chapters look into the three-dimensional human-machine communication and a class of local interpolating splines. This book will prove useful to design engineers.

Download or read book Three Dimensional Model Analysis and Processing written by Faxin Yu and published by Springer Science & Business Media. This book was released on 2011-02-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing popularization of the Internet, together with the rapid development of 3D scanning technologies and modeling tools, 3D model databases have become more and more common in fields such as biology, chemistry, archaeology and geography. People can distribute their own 3D works over the Internet, search and download 3D model data, and also carry out electronic trade over the Internet. However, some serious issues are related to this as follows: (1) How to efficiently transmit and store huge 3D model data with limited bandwidth and storage capacity; (2) How to prevent 3D works from being pirated and tampered with; (3) How to search for the desired 3D models in huge multimedia databases. This book is devoted to partially solving the above issues. Compression is useful because it helps reduce the consumption of expensive resources, such as hard disk space and transmission bandwidth. On the downside, compressed data must be decompressed to be used, and this extra processing may be detrimental to some applications. 3D polygonal mesh (with geometry, color, normal vector and texture coordinate information), as a common surface representation, is now heavily used in various multimedia applications such as computer games, animations and simulation applications. To maintain a convincing level of realism, many applications require highly detailed mesh models. However, such complex models demand broad network bandwidth and much storage capacity to transmit and store. To address these problems, 3D mesh compression is essential for reducing the size of 3D model representation.

Download or read book Geometric Modeling and Mesh Generation from Scanned Images written by Yongjie Jessica Zhang and published by CRC Press. This book was released on 2018-09-03 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-Edge Techniques to Better Analyze and Predict Complex Physical Phenomena Geometric Modeling and Mesh Generation from Scanned Images shows how to integrate image processing, geometric modeling, and mesh generation with the finite element method (FEM) to solve problems in computational biology, medicine, materials science, and engineering. Based on the author’s recent research and course at Carnegie Mellon University, the text explains the fundamentals of medical imaging, image processing, computational geometry, mesh generation, visualization, and finite element analysis. It also explores novel and advanced applications in computational biology, medicine, materials science, and other engineering areas. One of the first to cover this emerging interdisciplinary field, the book addresses biomedical/material imaging, image processing, geometric modeling and visualization, FEM, and biomedical and engineering applications. It introduces image-mesh-simulation pipelines, reviews numerical methods used in various modules of the pipelines, and discusses several scanning techniques, including ones to probe polycrystalline materials. The book next presents the fundamentals of geometric modeling and computer graphics, geometric objects and transformations, and curves and surfaces as well as two isocontouring methods: marching cubes and dual contouring. It then describes various triangular/tetrahedral and quadrilateral/hexahedral mesh generation techniques. The book also discusses volumetric T-spline modeling for isogeometric analysis (IGA) and introduces some new developments of FEM in recent years with applications.

Download or read book Geometric Modeling and Reasoning of Human Centered Freeform Products written by Charlie C. L. Wang and published by Springer Science & Business Media. This book was released on 2012-08-11 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent trend in user-customized product design requires the shape of products to be automatically adjusted according to the human body’s shape, so that people will feel more comfortable when wearing these products. Geometric approaches can be used to design the freeform shape of products worn by people, which can greatly improve the efficiency of design processes in various industries involving customized products (e.g., garment design, toy design, jewel design, shoe design, and design of medical devices, etc.). These products are usually composed of very complex geometric shapes (represented by free-form surfaces), and are not driven by a parameter table but a digital human model with free-form shapes or part of human bodies (e.g., wrist, foot, and head models). Geometric Modeling and Reasoning of Human-Centered Freeform Products introduces the algorithms of human body reconstruction, freeform product modeling, constraining and reconstructing freeform products, and shape optimization for improving the manufacturability of freeform products. Based on these techniques, the design automation problem for human-centered freeform products can be fundamentally solved. Researchers and developers working on problems of automatic designing individually customized products can use this book as a reference, and it can also be used in courses in computer-aided product design at the graduate level.

Download or read book Parallel Processing and Applied Mathematics written by Roman Wyrzykowski and published by Springer. This book was released on 2012-07-03 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume-set (LNCS 7203 and 7204) constitutes the refereed proceedings of the 9th International Conference on Parallel Processing and Applied Mathematics, PPAM 2011, held in Torun, Poland, in September 2011. The 130 revised full papers presented in both volumes were carefully reviewed and selected from numerous submissions. The papers address issues such as parallel/distributed architectures and mobile computing; numerical algorithms and parallel numerics; parallel non-numerical algorithms; tools and environments for parallel/distributed/grid computing; applications of parallel/distributed computing; applied mathematics, neural networks and evolutionary computing; history of computing.

Download or read book Geometric Science of Information written by Frank Nielsen and published by Springer. This book was released on 2013-08-19 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Geometric Science of Information, GSI 2013, held in Paris, France, in August 2013. The nearly 100 papers presented were carefully reviewed and selected from numerous submissions and are organized into the following thematic sessions: Geometric Statistics on Manifolds and Lie Groups, Deformations in Shape Spaces, Differential Geometry in Signal Processing, Relational Metric, Discrete Metric Spaces, Computational Information Geometry, Hessian Information Geometry I and II, Computational Aspects of Information Geometry in Statistics, Optimization on Matrix Manifolds, Optimal Transport Theory, Probability on Manifolds, Divergence Geometry and Ancillarity, Entropic Geometry, Tensor-Valued Mathematical Morphology, Machine/Manifold/Topology Learning, Geometry of Audio Processing, Geometry of Inverse Problems, Algebraic/Infinite dimensional/Banach Information Manifolds, Information Geometry Manifolds, and Algorithms on Manifolds.

Download or read book Image Analysis and Processing ICIAP 2009 written by Carlo Sansone and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 1075 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on Image Analysis and Processing, ICIAP 2009, held in Vietri sul Mare, Italy, in September 2009. The 107 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 168 submissions. The papers are organized in topical sections on computer graphics and image processing, low and middle level processing, 2D and 3D segmentation, feature extraction and image analysis, object detection and recognition, video analysis and processing, pattern analysis and classification, learning, graphs and trees, applications, shape analysis, face analysis, medical imaging, and image analysis and pattern recognition.

Download or read book Medical Imaging written by K.C. Santosh and published by CRC Press. This book was released on 2019-08-20 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the "Outstanding Academic Title" recognition by Choice for the 2020 OAT Awards. The Choice OAT Award represents the highest caliber of scholarly titles that have been reviewed by Choice and conveys the extraordinary recognition of the academic community. The book discusses varied topics pertaining to advanced or up-to-date techniques in medical imaging using artificial intelligence (AI), image recognition (IR) and machine learning (ML) algorithms/techniques. Further, coverage includes analysis of chest radiographs (chest x-rays) via stacked generalization models, TB type detection using slice separation approach, brain tumor image segmentation via deep learning, mammogram mass separation, epileptic seizures, breast ultrasound images, knee joint x-ray images, bone fracture detection and labeling, and diabetic retinopathy. It also reviews 3D imaging in biomedical applications and pathological medical imaging.

Download or read book Dynamic 3D Scene Analysis and Modeling with a Time of flight Camera written by Ingo Schiller and published by BoD – Books on Demand. This book was released on 2011 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viele Anwendungen des Maschinellen Sehens benötigen die automatische Analyse und Rekonstruktion von statischen und dynamischen Szenen. Deshalb ist die automatische Analyse von dreidimensionalen Szenen und Objekten ein Bereich der intensiv erforscht wird. Die meisten Ansätze konzentrieren sich auf die Rekonstruktion statischer Szenen, da die Rekonstruktion nicht-statischer Geometrien viel herausfordernder ist und voraussetzt, dass dreidimensionale Szeneninformation mit hoher zeitlicher Auflösung verfügbar ist. Statische Szenenanalyse wird beispielsweise in der autonomen Navigation, für die Überwachung und für die Erhaltung des Kulturerbes eingesetzt. Andererseits eröffnet die Analyse und Rekonstruktion nicht-statischer Geometrie viel mehr Möglichkeiten, nicht nur für die bereits erwähnten Anwendungen. In der Produktion von Medieninhalten für Film und Fernsehen kann die Analyse und die Aufnahme und Wiedergabe von vollständig dreidimensionalen Inhalten verwendet werden um neue Ansichten realer Szenen zu erzeugen oder echte Schauspieler durch animierte virtuelle Charaktere zu ersetzen. Die wichtigste Voraussetzung für die Analyse von dynamischen Inhalten ist die Verfügbarkeit von zuverlässigen dreidimensionalen Szeneninformationen. Um die Entfernung von Punkten in der Szene zu bestimmen wurden meistens Stereo-Verfahren eingesetzt, aber diese Verfahren benötigen viel Rechenzeit und erreichen in Echtzeit nicht die benötigte Qualität. In den letzten Jahren haben die so genannten Laufzeitkameras das Stadium der Prototypen verlassen und sind jetzt in der Lage dichte Tiefeninformationen in vernünftiger Qualität zu einem vernünftigen Preis zu liefern. Diese Arbeit untersucht die Eignung dieser Kameras für die Analyse nicht-statischer dreidimensionaler Szenen. Bevor eine Laufzeitkamera für die Analyse eingesetzt werden kann muss sie intern und extern kalibriert werden. Darüber hinaus leiden Laufzeitkameras an systematischen Fehlern bei der Entfernungsmessung, bedingt durch ihr

Download or read book Transactions on Petri Nets and Other Models of Concurrency II written by Wil M. P. van der Aalst and published by Springer. This book was released on 2009-03-26 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transactions on Petri Nets and Other Models of Concurrency (ToPNoC) II These Transactions publish archival papers in the broad area of Petri nets and other models of concurrency, ranging from theoretical work to tool support and industrial applications. ToPNoC issues are published as LNCS volumes, and hence are widely distributed and indexed. This Journal has its own Editorial Board which selects papers based on a rigorous two-stage refereeing process. ToPNoC contains: - Revised versions of a selection of the best papers from workshops and tutorials at the annual Petri net conferences - Special sections/issues within particular subareas (similar to those published in the Advances in Petri Nets series) - Other papers invited for publication in ToPNoC - Papers submitted directly to ToPNoC by their authors The second volume of ToPNoC focuses on Concurrency in Process-Aware Information Systems. Although the topic of business process management using information technology has been addressed by consultants and software developers in depth, more fundamental approaches towards such Process-Aware Information Systems (PAISs) have been rather uncommon. It wasn't until the 1990s that researchers started to work on the foundations of PAISs. Clearly, concurrency theory is an essential ingredient in these foundations as business processes are highly concurrent involving all types of routing logic and resource allocation mechanisms. The 16 papers in this special issue of ToPNoC cover topics ranging from the formal (mostly Petri-net based) foundations of PAISs to more applied topics such as flexibility and process mining. Thus, this volume gives a good overview of the state of the art in PAIS research.

Download or read book Proceedings Second International Conference on Information Processing written by L. M. Patnaik and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings features several key-note addresses in the areas of advanced information processing tools. This area has been recognized to be one of the key five technologies poised to shape the modern society in the next decade. It aptly focuses on the tools and techniques for the development of Information Systems. Emphasis is on pattern recognition and image processing, software engineering, mobile ad hoc networks, security aspects in computer networks, signal processing and hardware synthesis, optimization techniques, data mining and information processing.

Download or read book Modeling Volcanic Processes written by Sarah A. Fagents and published by Cambridge University Press. This book was released on 2013-03-14 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced textbook and reference resource examining the physics of volcanic behavior and the state of the art in modeling volcanic processes.

Download or read book Encyclopedia of Optical and Photonic Engineering Print Five Volume Set written by Craig Hoffman and published by CRC Press. This book was released on 2015-09-22 with total page 3726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of the Encyclopedia of Optical and Photonic Engineering provided a valuable reference concerning devices or systems that generate, transmit, measure, or detect light, and to a lesser degree, the basic interaction of light and matter. This Second Edition not only reflects the changes in optical and photonic engineering that have occurred since the first edition was published, but also: Boasts a wealth of new material, expanding the encyclopedia’s length by 25 percent Contains extensive updates, with significant revisions made throughout the text Features contributions from engineers and scientists leading the fields of optics and photonics today With the addition of a second editor, the Encyclopedia of Optical and Photonic Engineering, Second Edition offers a balanced and up-to-date look at the fundamentals of a diverse portfolio of technologies and discoveries in areas ranging from x-ray optics to photon entanglement and beyond. This edition’s release corresponds nicely with the United Nations General Assembly’s declaration of 2015 as the International Year of Light, working in tandem to raise awareness about light’s important role in the modern world. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Treatise on Geomorphology written by and published by Academic Press. This book was released on 2013-02-27 with total page 6392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing focus and approach of geomorphic research suggests that the time is opportune for a summary of the state of discipline. The number of peer-reviewed papers published in geomorphic journals has grown steadily for more than two decades and, more importantly, the diversity of authors with respect to geographic location and disciplinary background (geography, geology, ecology, civil engineering, computer science, geographic information science, and others) has expanded dramatically. As more good minds are drawn to geomorphology, and the breadth of the peer-reviewed literature grows, an effective summary of contemporary geomorphic knowledge becomes increasingly difficult. The fourteen volumes of this Treatise on Geomorphology will provide an important reference for users from undergraduate students looking for term paper topics, to graduate students starting a literature review for their thesis work, and professionals seeking a concise summary of a particular topic. Information on the historical development of diverse topics within geomorphology provides context for ongoing research; discussion of research strategies, equipment, and field methods, laboratory experiments, and numerical simulations reflect the multiple approaches to understanding Earth’s surfaces; and summaries of outstanding research questions highlight future challenges and suggest productive new avenues for research. Our future ability to adapt to geomorphic changes in the critical zone very much hinges upon how well landform scientists comprehend the dynamics of Earth’s diverse surfaces. This Treatise on Geomorphology provides a useful synthesis of the state of the discipline, as well as highlighting productive research directions, that Educators and students/researchers will find useful. Geomorphology has advanced greatly in the last 10 years to become a very interdisciplinary field. Undergraduate students looking for term paper topics, to graduate students starting a literature review for their thesis work, and professionals seeking a concise summary of a particular topic will find the answers they need in this broad reference work which has been designed and written to accommodate their diverse backgrounds and levels of understanding Editor-in-Chief, Prof. J. F. Shroder of the University of Nebraska at Omaha, is past president of the QG&G section of the Geological Society of America and present Trustee of the GSA Foundation, while being well respected in the geomorphology research community and having won numerous awards in the field. A host of noted international geomorphologists have contributed state-of-the-art chapters to the work. Readers can be guaranteed that every chapter in this extensive work has been critically reviewed for consistency and accuracy by the World expert Volume Editors and by the Editor-in-Chief himself No other reference work exists in the area of Geomorphology that offers the breadth and depth of information contained in this 14-volume masterpiece. From the foundations and history of geomorphology through to geomorphological innovations and computer modelling, and the past and future states of landform science, no "stone" has been left unturned!

Download or read book BIOMAT 2011 written by Rubem P. Mondaini and published by World Scientific. This book was released on 2012 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains a selection of articles on special research topics on Mathematical Biology and the interdisciplinary fields of mathematical modelling of biosystems. The treatment is both pedagogical and advanced to enhance future scientific research. We include comprehensive reviews written by prominent leaders of scientific research groups, new results on Population Dynamics such as Hybrid Discrete-Continuous Models of Cell Populations and the Hopf bifurcation on Predator-Prey Models, and some state of the art research on Medical Physics such as Optimization Methods applied to Raman Spectroscopy. Other topics covered focus on evolution biology, infectious diseases, DNA structure and many more.