Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2002 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro Nano Manufacturing written by André Zimmermann and published by MDPI. This book was released on 2019-09-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro manufacturing involves dealing with the fabrication of structures in the size range of 0.1 to 1000 µm. The scope of nano manufacturing extends the size range of manufactured features to even smaller length scales—below 100 nm. A strict borderline between micro and nano manufacturing can hardly be drawn, such that both domains are treated as complementary and mutually beneficial within a closely interconnected scientific community. Both micro and nano manufacturing can be considered as important enablers for high-end products. This Special Issue of Applied Sciences is dedicated to recent advances in research and development within the field of micro and nano manufacturing. The included papers report recent findings and advances in manufacturing technologies for producing products with micro and nano scale features and structures as well as applications underpinned by the advances in these technologies.

Download or read book Engineering Mechanics of Composite Materials written by Isaac M. Daniel and published by . This book was released on 2007 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.

Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.

Download or read book Microrheology written by Eric M. Furst and published by Oxford University Press. This book was released on 2017 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology is the study of the flow of matter. It is an important and active field of research that spans numerous disciplines and technological applications. The aim of this work is to provide an introduction to the theory and practice of microrheology, a relatively new area of rheology.

Download or read book An Introduction to Nanoscience and Nanotechnology written by Alain Nouailhat and published by Wiley-ISTE. This book was released on 2008-01-14 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Part of this book adapted from "Introduction aux nanosciences et aux nanotechnologies" published in France by Hermes Science/Lavoisier in 2006."

Download or read book Professional Communications written by Heather Silyn-Roberts and published by Amer Society of Civil Engineers. This book was released on 2005 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heather Silyn-Roberts provides practical, comprehensive advice on best practice for professional engineering communications that convey information to readers accurately and simply.

Download or read book Battery Management Systems of Electric and Hybrid Electric Vehicles written by Nicolae Tudoroiu and published by MDPI. This book was released on 2021-08-30 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics of interest in this book include significant challenges in the BMS design of EV/HEV. The equivalent models developed for several types of integrated Li-ion batteries consider the environmental temperature and ageing effects. Different current profiles for testing the robustness of the Kalman filter type estimators of the battery state of charge are used in this book. Additionally, the BMS can integrate a real-time model-based sensor Fault Detection and Isolation (FDI) scheme for a Li-ion cell undergoing degradation, which uses the recursive least squares (RLS) method to estimate the equivalent circuit model (ECM) parameters. This book will fully meet the demands of a large community of readers and specialists working in the field due to its attractiveness and scientific content with a great openness to the side of practical applicability. This covers various interesting aspects, especially related to the characterization of commercial batteries, diagnosis and optimization of their performance, experimental testing and statistical analysis, thermal modelling, and implementation of the most suitable Kalman filter type estimators of high accuracy to estimate the state of charge

Download or read book Biofabrication written by Yi Cheng and published by Elsevier Inc. Chapters. This book was released on 2013-03-18 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits transformed our lives, and the potential for integrating biology with devices promises even greater transformations. A key question is how to effectively interface biological and microfabricated systems. Our approach is to “biofabricate” the biology-device interface using biological materials and mechanisms. Here, we review recent progress on three biofabrication approaches: the use of stimuli-responsive materials to recognize device-imposed electrical inputs to direct the assembly (i.e., to electrodeposit) of hydrogels; the use of enzymes to build structure by conjugating and crosslinking macromolecules; and the use of genetic techniques to engineer proteins for assembly. We further illustrate how these biofabrication approaches enable the biofunctionalization of previously fabricated microfluidic devices and suggest the potential for lab-on-chip analysis and the creation of experimental devices to study complex biological systems. We anticipate that the complementarity between biological and technological fabrication paradigms will provide broad opportunities to build structures that couple the power of electronics to the versatility of biology.

Download or read book Product Process Fingerprint in Micro Manufacturing written by Guido Tosello and published by MDPI. This book was released on 2019-05-31 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuous miniaturization of products and the growing complexity of their embedded multifunctionalities necessitates continuous research and development efforts regarding micro components and related micro manufacturing technologies. Highly miniaturized systems, manufactured using a wide variety of materials, have found application in key technological fields, such as healthcare devices, micro implants, mobility, communications, optics, and micro electromechanical systems. Innovations required for the high-precision manufacturing of micro components can specifically be achieved through optimizations using post-process (i.e., offline) and in-process (i.e., online) metrology of both process input and output parameters, as well as geometrical features of the produced micro parts. However, it is of critical importance to reduce the metrology and optimization efforts, since process and product quality control can represent a significant portion of the total production time in micro manufacturing. To solve this fundamental challenge, research efforts have been undertaken in order to define, investigate, implement, and validate the so-called “product/process manufacturing fingerprint” concept. The “product manufacturing fingerprint” concept refers to those unique dimensional outcomes (e.g., surface topography, form error, critical dimensions, etc.) on the produced component that, if kept under control and within specifications, ensure that the entire micro component complies to its specifications. The “process manufacturing fingerprint” is a specific process parameter or feature to be monitored and controlled, in order to maintain the manufacture of products within the specified tolerances. By integrating both product and process manufacturing fingerprint concepts, the metrology and optimization efforts are highly reduced. Therefore, the quality of the micro products increases, with an obvious improvement in production yield. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on novel methodological developments and applications in micro- and sub-micro-scale manufacturing, process monitoring and control, as well as micro and sub-micro product quality assurance. Focus will be on micro manufacturing process chains and their micro product/process fingerprint, towards full process optimization and zero-defect micro manufacturing.

Download or read book Intelligent Systems written by Alexander M. Meystel and published by Wiley-Interscience. This book was released on 2002 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatment of the field of intelligent systems is written by two of the foremost authorities in the field. The authors clearly examine the theoretical and practical aspects of these systems. The book focuses on the NIST-RCS (Real-time Control System) model that has been used recently in the Mars Rover.

Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.

Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.

Download or read book Biomimetic biomaterials written by R. Rabiei and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter investigates the concept of hierarchy widely found in biological materials. First, natural hierarchical materials are explored in terms of their high order structures formed from universal building blocks. Hierarchical arrangement is claimed to give rise to remarkable mechanical properties of biological structures. Therefore at the next step, the significance of hierarchical structuring on mechanical properties is investigated through available analytical models. Finally, fabrication methods which could potentially lead to artificial hierarchical structures are briefly reviewed in the domain of biomimetics.

Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. - Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field - Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms - Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy

Download or read book Fracture Mechanics of Concrete written by Surendra P. Shah and published by John Wiley & Sons. This book was released on 1995-09-28 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: FRACTURE MECHANICS OF CONCRETE AND ROCK This book offers engineers a unique opportunity to learn, frominternationally recognized leaders in their field, about the latesttheoretical advances in fracture mechanics in concrete, reinforcedconcrete structures, and rock. At the same time, it functions as asuperb, graduate-level introduction to fracture mechanics conceptsand analytical techniques. Reviews, in depth, the basic theory behind fracture mechanics * Covers the application of fracture mechanics to compressionfailure, creep, fatigue, torsion, and other advanced topics * Extremely well researched, applies experimental evidence ofdamage to a wide range of design cases * Supplies all relevant formulas for stress intensity * Covers state-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Describes nonlinear fracture mechanics (NLFM) and the latestRILEM modeling techniques for testing nonlinear quasi-brittlematerials * And much more Over the past few years, researchers employing techniques borrowedfrom fracture mechanics have made many groundbreaking discoveriesconcerning the causes and effects of cracking, damage, andfractures of plain and reinforced concrete structures and rock.This, in turn, has resulted in the further development andrefinement of fracture mechanics concepts and tools. Yet, despitethe field's growth and the growing conviction that fracturemechanics is indispensable to an understanding of material andstructural failure, there continues to be a surprising shortage oftextbooks and professional references on the subject. Written by two of the foremost names in the field, FractureMechanics of Concrete fills that gap. The most comprehensive bookever written on the subject, it consolidates the latest theoreticalresearch from around the world in a single reference that can beused by students and professionals alike. Fracture Mechanics of Concrete is divided into two sections. In thefirst, the authors lay the necessary groundwork with an in-depthreview of fundamental principles. In the second section, theauthors vividly demonstrate how fracture mechanics has beensuccessfully applied to failures occurring in a wide array ofdesign cases. Key topics covered in these sections include: * State-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Nonlinear fracture mechanics (NLFM) and the latest RILEM modelingtechniques for testing nonlinear quasi-brittle materials * The use of R-Curves to describe cracking and fracture inquasi-brittle materials * The application of fracture mechanics to compression failure,creep, fatigue, torsion, and other advanced topics The most timely, comprehensive, and authoritative book on thesubject currently available, Fracture Mechanics of Concrete is botha complete instructional tool for academics and students instructural and geotechnical engineering courses, and anindispensable working resource for practicing engineers.