Download or read book SPEAR Seismic Performance Assessment and Rehabilitation of Existing Buildings written by Michael Fardis and published by . This book was released on 2005 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Workshop Seismic Performance Assessment and Rehabilitation, an event to honour the memory of Prof. Jean Donea.

Download or read book Proceedings of the International Workshop Ispra 4 5 April 2005 Sesmic Performance Assessment and Rehabilitation of Existing Buildings written by Michael N. Fardis and published by . This book was released on 2005 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Assessment and Rehabilitation of Existing Buildings written by S. Tanvir Wasti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains a total of 23 papers centred on the research area of Seismic Assessment and Rehabilitation of Existing Buildings. This subject also forms the core of Project SfP977231, sponsored by the NATO Science for Peace Office and supported by the Scientific and Technical Research Council of Turkey [ TUBIT AK ]. Most of these papers were presented by the authors at a NATO Science for Peace Workshop held in Izmir on 13 - 14 May, 2003 and reflect a part of their latest work conducted within the general confines of the title of the NATO Project. Middle East Technical University, Ankara, Turkey serves as the hub of Project SfP977231 and coordinates research under the project with universities within Turkey, e. g. Istanbul Technical University and Kocaeli University, and with partner institutions in Greece and the Former Yugoslav Republic of Macedonia: A few articles have also been contributed by invited experts, who are all noted researchers in the field. Altogether, the contents of the volume deal with a vast array of problems in Seismic Assessment and Rehabilitation and cover a wide range of possible solutions, techniques and proposals. It is intended to touch upon many of these aspects separately below. Earthquakes constitute possibly the most widely spread and also the most feared of natural hazards. Recent earthquakes within the first six months of 2003, such as the Bingol Earthquake in Turkey and the Algerian earthquake, have caused both loss of life and severe damage to property.

Download or read book Seismic Risk Assessment and Retrofitting written by Alper Ilki and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many more people are coming to live in earthquake-prone areas, especially urban ones. Many such areas contain low-rise, low-cost housing, while little money is available to retrofit the buildings to avoid total collapse and thus potentially save lives. The lack of money, especially in developing countries, is exacerbated by difficulties with administration, implementation and public awareness. The future of modern earthquake engineering will come to be dominated by new kinds of measuring technologies, new materials developed especially for low-rise, low-cost buildings, simpler and thus lower cost options for retrofitting, cost cutting and raising public awareness. The book covers all the areas involved in this complex issue, from the prevention of total building collapse, through improvement techniques, to legal, financial, taxation and social issues. The contributors have all made valuable contributions in their own particular fields; all of them are or have been closely involved with the issues that can arise in seismic zones in any country. The recent research results published here offer invaluable pointers to practicing engineers and administrators, as well as other scientists whose work involves saving the lives and property of the many millions of people who live and work in hazardous buildings.

Download or read book Improving the Seismic Performance of Existing Buildings and Other Structures written by Barry Goodno and published by ASCE Publications. This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 2009 ATC and SEI Conference on Improving the Seismic Performance of Buildings and Other Structures, held in San Francisco, California, December 9-11, 2009. Sponsored by Applied Technology Council and the Structural Engineering Institute of ASCE. This collection contains 133 papers that advance an engineering professional's understanding of the tools, techniques, and innovations available to meet the challenges of seismic evaluation and rehabilitation. Those new to seismic rehabilitation will find this collection to be an excellent introduction to the core issues. This volume focuses solely on improving the seismic performance of existing buildings and other structures. The papers present new information on the seismic evaluation and seismic rehabilitation of existing buildings, including case studies, new discoveries, innovative use of technologies and materials, implementation issues, needed improvements to existing standards and methods, and socioeconomic issues.

Download or read book Seismic Behaviour and Design of Irregular and Complex Civil Structures written by Oren Lavan and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural irregularities are one of the most frequent causes of severe damages in buildings, as evidenced by the numerous earthquakes in recent years. This issue is of particular importance, since real structures are almost all irregular. Furthermore, structural irregularities depend on several factors often very difficult to predict. This book is an essential tool for understanding the problem of structural irregularities and provides the most up-to-date review on this topic, covering the aspects of ground rotations, analysis, design, control and monitoring of irregular structures. It includes 24 contributions from authors of 13 countries, giving a complete and international view of the problem.

Download or read book Advances in Earthquake Engineering for Urban Risk Reduction written by S. Tanvir Wasti and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes affecting urban areas can lead to catastrophic situations and hazard mitigation requires preparatory measures at all levels. Structural assessment is the diagnosis of the seismic health of buildings. Assessment is the prelude to decisions about rehabilitation or even demolition. The scale of the problem in dense urban settings brings about a need for macro seismic appraisal procedures because large numbers of existing buildings do not conform to the increased requirements of new earthquake codes and specifications or have other deficiencies. It is the vulnerable buildings - liable to cause damage and loss of life - that need immediate attention and urgent appraisal in order to decide if structural rehabilitation and upgrading are feasible. Current economic, efficient and occupant-friendly rehabilitation techniques vary widely and include the application either of precast concrete panels or layers, strips and patches of fiber reinforced polymers (FRP) in strategic locations. The papers in this book, many by renowned authorities in earthquake engineering, chart new and vital directions of research and application in the assessment and rehabilitation of buildings in seismic regions. While several papers discuss the probabilistic prediction and quantification of structural damage, others present approaches related with the in-situ and occupant friendly upgrading of buildings and propose both economical and practical techniques to address the problem.

Download or read book Seismic Rehabilitation Methods for Existing Buildings written by Reza Mokarram Aydenlou and published by Butterworth-Heinemann. This book was released on 2020-08-01 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Rehabilitation Methods for Existing Buildings covers various structures, effective parameters in seismic improvement, and other factors in seismic loading in eight applied chapters with descriptive classification. The book offers guidance for a seismic rehabilitation project based on the interpretation of publications FEMA and Iranian seismic rehabilitation regulations no.360 . It includes real examples of completed and approved projects to stabilize the seismic improvement issues of existing buildings. Six perfectly executed examples, with complete refinement details, such as modeling, step-by-step improvement studies, and executive plans and seismic enhancement images are included. The book also explains the classification of non-structural element and how to carry out it's seismic reconstruction studies and in one of the chapters, construction and soil improvement methods are discussed along with a practical example.The concepts of seismic rehabilitation in this book are presented with an Info-graphic structure that better fixes the concepts in the minds of readers so that when they face a new project, they have a more practical use of the content Provides a fully functional way to evaluate, model and present details of a seismic rehabilitation plan for a building Presents real seismic refurbishment models and step-by-step methods for providing examples (including images, tables and charts)

Download or read book Role of Seismic Testing Facilities in Performance Based Earthquake Engineering written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2011-10-07 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays research in earthquake engineering is mainly experimental and in large-scale; advanced computations are integrated with large-scale experiments, to complement them and extend their scope, even by coupling two different but simultaneous tests. Earthquake engineering cannot give answers by testing and qualifying few, small typical components or single large prototypes. Besides, the large diversity of Civil Engineering structures does not allow drawing conclusions from only a few tests; structures are large and their seismic response and performance cannot be meaningfully tested in an ordinary lab or in the field. So, seismic testing facilities should be much larger than in other scientific fields; their staff has to be resourceful, devising intelligent ways to carry out simultaneously different tests and advanced computations. To better serve such a mission European testing facilities and researchers in earthquake engineering have shared their resources and activities in the framework of the European project SERIES, combining their research and jointly developing advanced testing and instrumentation techniques that maximize testing capabilities and increase the value of the tests. This volume presents the first outcomes of the SERIES and its contribution towards Performance-based Earthquake Engineering, i.e., to the most important development in Earthquake Engineering of the past three decades. The concept and the methodologies for performance-based earthquake engineering have now matured. However, they are based mainly on analytical/numerical research; large-scale seismic testing has entered the stage recently. The SERIES Workshop in Ohrid (MK) in Sept. 2010 pooled together the largest European seismic testing facilities, Europe’s best experts in experimental earthquake engineering and select experts from the USA, to present recent research achievements and to address future developments. Audience: This volume will be of interest to researchers and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics, including seismic qualification.

Download or read book Seismic Rehabilitation of Existing Buildings ASCE SEI 41 06 Rehabilitation Requirements Chapter 2 Scope Chapter 3 Analysis Procedures Chapter 4 Foundations and Geologic Site Hazards Chapter 5 Steel Chapter 6 Concrete Chapter 7 Masonry Chapter 8 Wood and Light Metal Framing Chapter 9 Seismic Isolation and Energy Dissipation Chapter 10 Simplified Rehabilitation Chapter 11 Architectural Mechanical and Electrical Components Appendix A Use of this Standard for Local or Directed Risk Mitigation Programs Symbols Acronyms Definitions References written by American Society of Civil Engineers and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Rehabilitation of Existing Buildings presents the latest generation of performance-based seismic rehabilitation methodology. This new national consensus standard was developed from the FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings. This Standard represents state-of-the-art knowledge in earthquake engineering and is a valuable tool for the structural engineering profession to improve building performance in future earthquakes. It includes significant improvements in current understanding of building behavior in earthquakes, such as: improved C-coefficients for calculation of the pseudo-lateral force and target displacement based on recommendations in FEMA 440; comprehensive soil-structure interaction provisions, including kinematic effects and foundation damping effects; revised acceptance criteria for steel moment frames to reflect final conclusions of the SAC Joint Venture research; expanded acceptance criteria for concentrically braced frames defined as a function of brace slenderness, compactness, and level of connection detailing; and updated nonstructural provisions to be consistent with current NEHRP Provisions for new buildings. ASCE/SEI Standard 41-06 is a valuable tool for structural engineers and the public for improving seismic performance of existing buildings.

Download or read book Metaheuristic Applications in Structures and Infrastructures written by Alireza Azarbakht and published by Elsevier Inc. Chapters. This book was released on 2013-01-31 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Techniques for the Seismic Rehabilitation of Existing Buildings written by and published by FEMA. This book was released on 2006 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Performance Based Earthquake Engineering written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-based Earthquake Engineering has emerged before the turn of the century as the most important development in the field of Earthquake Engineering during the last three decades. It has since then started penetrating codes and standards on seismic assessment and retrofitting and making headway towards seismic design standards for new structures as well. The US have been a leader in Performance-based Earthquake Engineering, but also Europe is a major contributor. Two Workshops on Performance-based Earthquake Engineering, held in Bled (Slovenia) in 1997 and 2004 are considered as milestones. The ACES Workshop in Corfu (Greece) of July 2009 builds on them, attracting as contributors world-leaders in Performance-based Earthquake Engineering from North America, Europe and the Pacific rim (Japan, New Zealand, Taiwan, China). It covers the entire scope of Performance-based Earthquake Engineering: Ground motions for performance-based earthquake engineering; Methodologies for Performance-based seismic design and retrofitting; Implementation of Performance-based seismic design and retrofitting; and Advanced seismic testing for performance-based earthquake engineering. Audience: This volume will be of interest to scientists and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics.

Download or read book Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures written by Asteris, Panagiotis G. and published by IGI Global. This book was released on 2015-07-13 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of heritage monuments provides sustainable development and cultural significance to a region. The most sensitive aspect of the refurbishment of existing buildings lies in the renovation and recovery of structural integrity and public safety. The Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures evaluates developing contributions in the field of earthquake engineering with regards to the analysis and treatment of structural damage inflicted by seismic activity. This book is a vital reference source for professionals, researchers, students, and engineers active in the field of earthquake engineering who are interested in the emergent developments and research available in the preservation and rehabilitation of heritage buildings following seismic activity.

Download or read book Seismic Assessment and Retrofit of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-08-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most parts of the developed world, the building stock and the civil infrastructure are ageing and in constant need of maintenance, repair and upgrading. Moreover, in the light of our current knowledge and of modern codes, the majority of buildings stock and other types of structures in many parts of the world are substandard and deficient. This is especially so in earthquake-prone regions, as, even there, seismic design of structures is relatively recent. In those regions the major part of the seismic threat to human life and property comes from old buildings. Due to the infrastructure's increasing decay, frequently combined with the need for structural upgrading to meet more stringent design requirements (especially against seismic loads), structural retrofitting is becoming more and more important and receives today considerable emphasis throughout the world. In response to this need, a major part of the fib Model Code 2005, currently under development, is being devoted to structural conservation and maintenance. More importantly, in recognition of the importance of the seismic threat arising from existing substandard buildings, the first standards for structural upgrading to be promoted by the international engineering community and by regulatory authorities alike are for seismic rehabilitation of buildings. This is the case, for example, of Part 3: Strengthening and Repair of Buildings of Eurocode 8 (i. e. of the draft European Standard for earthquake-resistant design), and which is the only one among the current (2003) set of 58 Eurocodes attempting to address the problem of structural upgrading. It is also the case of the recent (2001) ASCE draft standard on Seismic evaluation of existing buildings and of the 1996 Law for promotion of seismic strengthening of existing reinforced concrete structures in Japan. As noted in Chapter 1 of this Bulletin, fib - as CEB and FIP did before - has placed considerable emphasis on assessment and rehabilitation of existing structures. The present Bulletin is a culmination of this effort in the special but very important field of seismic assessment and rehabilitation. It has been elaborated over a period of 4 years by Task Group 7.1 Assessment and retrofit of existing structures of fib Commission 7 Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In the course of its work the team had six plenary two-day meetings: in January 1999 in Pavia, Italy; in August 1999 in Raleigh, North Carolina; in February 2000 in Queenstown, New Zealand; in July 2000 in Patras, Greece; in March 2001 in Lausanne, Switzerland; and in August 2001 in Seattle, Washington. In October 2002 the final draft of the Bulletin was presented to public during the 1st fib Congress in Osaka. It was also there that it was approved by fib Commission 7 Seismic Design. The contents is structured into main chapters as follows: 1 Introduction - 2 Performance objectives and system considerations - 3 Review of seismic assessment procedures - 4 Strength and deformation capacity of non-seismically detailed components - 5 Seismic retrofitting techniques - 6 Probabilistic concepts and methods - 7 Case studies

Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.

Download or read book Risk Management Series Incremental Seismic Rehabilitation of Office Buildings Providing Protection to People and Buildings written by and published by FEMA. This book was released on with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: