Download or read book Optical Imaging and Metrology written by Wolfgang Osten and published by John Wiley & Sons. This book was released on 2012-09-10 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the state of the art and advances in the field, while also outlining the future potential and development trends of optical imaging and optical metrology, an area of fast growth with numerous applications in nanotechnology and nanophysics. Written by the world's leading experts in the field, it fills the gap in the current literature by bridging the fields of optical imaging and metrology, and is the only up-to-date resource in terms of fundamental knowledge, basic concepts, methodologies, applications, and development trends.

Download or read book Optical MEMS written by Huikai Xie and published by MDPI. This book was released on 2019-08-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Optical MEMS that was published in Micromachines

Download or read book Optical Engineering written by and published by . This book was released on 1998 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers reporting on research and development in optical science and engineering and the practical applications of known optical science, engineering, and technology.

Download or read book Generalized Phase Contrast written by Jesper Glückstad and published by Springer Science & Business Media. This book was released on 2009-10-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generalized Phase Contrast elevates the phase contrast technique not only to improve phase imaging but also to cross over and interface with diverse and seemingly disparate fields of contemporary optics and photonics. This book presents a comprehensive introduction to the Generalized Phase Contrast (GPC) method including an overview of the range of current and potential applications of GPC in wavefront sensing and phase imaging, structured laser illumination and image projection, optical trapping and manipulation, and optical encryption and decryption. The GPC method goes further than the restrictive assumptions of conventional Zernike phase contrast analysis and achieves an expanded range of validity beyond weak phase perturbations. The generalized analysis yields design criteria for tuning experimental parameters to achieve optimal performance in terms of accuracy, fidelity and light efficiency. Optimization can address practical issues, such as finding an optimal spatial filter for the chosen application, and can even enable a Reverse Phase Contrast mode where intensity patterns are converted into a phase modulation.

Download or read book Femtosecond Laser Micromachining written by Roberto Osellame and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond laser micromachining of transparent material is a powerful and versatile technology. In fact, it can be applied to several materials. It is a maskless technology that allows rapid device prototyping, has intrinsic three-dimensional capabilities and can produce both photonic and microfluidic devices. For these reasons it is ideally suited for the fabrication of complex microsystems with unprecedented functionalities. The book is mainly focused on micromachining of transparent materials which, due to the nonlinear absorption mechanism of ultrashort pulses, allows unique three-dimensional capabilities and can be exploited for the fabrication of complex microsystems with unprecedented functionalities.This book presents an overview of the state of the art of this rapidly emerging topic with contributions from leading experts in the field, ranging from principles of nonlinear material modification to fabrication techniques and applications to photonics and optofluidics.

Download or read book Road Vehicle Automation 3 written by Gereon Meyer and published by Springer. This book was released on 2016-07-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book comprises papers about the impacts, benefits and challenges of connected and automated cars. It is the third volume of the LNMOB series dealing with Road Vehicle Automation. The book comprises contributions from researchers, industry practitioners and policy makers, covering perspectives from the U.S., Europe and Japan. It is based on the Automated Vehicles Symposium 2015 which was jointly organized by the Association of Unmanned Vehicle Systems International (AUVSI) and the Transportation Research Board (TRB) in Ann Arbor, Michigan, in July 2015. The topical spectrum includes, but is not limited to, public sector activities, human factors, ethical and business aspects, energy and technological perspectives, vehicle systems and transportation infrastructure. This book is an indispensable source of information for academic researchers, industrial engineers and policy makers interested in the topic of road vehicle automation.

Download or read book Optical Imaging and Microscopy written by Peter Török and published by Springer. This book was released on 2013-06-05 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text draws together the fields of optical microscopy and optical data storage, in a unique compilation of valuable and novel scientific work that is scarcely to be found elsewhere. The contributing authors are unquestioned leaders of their respective fields.

Download or read book Laser Precision Microfabrication written by Koji Sugioka and published by Springer. This book was released on 2010-08-13 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Miniaturization and high precision are rapidly becoming a requirement for many industrial processes and products. As a result, there is greater interest in the use of laser microfabrication technology to achieve these goals. This book composed of 16 chapters covers all the topics of laser precision processing from fundamental aspects to industrial applications to both inorganic and biological materials. It reviews the sate of the art of research and technological development in the area of laser processing.

Download or read book The Physics of Ultra High Density Magnetic Recording written by M.L. Plumer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application-oriented book on magnetic recording, focussing on the underlying physical mechanisms that play crucial roles in medium and transducer development for high areal density disk drives.

Download or read book MEMS Mirrors written by Huikai Xie and published by MDPI. This book was released on 2018-05-04 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "MEMS Mirrors" that was published in Micromachines

Download or read book Silicon Photonics II written by David J. Lockwood and published by Springer Science & Business Media. This book was released on 2010-10-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is volume II of a series of books on silicon photonics. It gives a fascinating picture of the state-of-the-art in silicon photonics from a component perspective. It presents a perspective on what can be expected in the near future. It is formed from a selected number of reviews authored by world leaders in the field, and is written from both academic and industrial viewpoints. An in-depth discussion of the route towards fully integrated silicon photonics is presented. This book will be useful not only to physicists, chemists, materials scientists, and engineers but also to graduate students who are interested in the fields of micro- and nanophotonics and optoelectronics.

Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.

Download or read book Frontiers in Optics and Photonics written by Federico Capasso and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-06-08 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cutting-edge research overview on the latest developments in the field of Optics and Photonics. All chapters are authored by the pioneers in their field and will cover the developments in Quantum Photonics, Optical properties of 2D Materials, Optical Sensors, Organic Opto-electronics, Nanophotonics, Metamaterials, Plasmonics, Quantum Cascade lasers, LEDs, Biophotonics and biomedical photonics and spectroscopy.

Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.

Download or read book Field Guide to Lidar written by Paul F. McManamon and published by . This book was released on 2015 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide covers the various components and types of active electro-optical sensors - referred to as lidars in the text - from simple 2D direct-detection lidars to multiple subaperture synthetic aperture lidars. Other topics covered include receivers, apertures, atmospheric effects, and appropriate processing of different lidars. Lasers and modulation are presented in terms of their use in lidars. The lidar range equation in its many variations is discussed along with receiver noise issues that determine how much signal must be received to detect an object. This book is a handy reference to quickly look up any aspect of active electro-optical sensors. It will be useful to students, lidar scientists, or engineers needing an occasional reminder of the correct approaches or equations in certain applications, and systems engineers interested in gaining a perspective on this rapidly growing technology.

Download or read book Infrared Detectors and Emitters Materials and Devices written by Peter Capper and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date view of the various detector/emitter materials systems currently in use or being actively researched. The book is aimed at newcomers and those already working in the IR industry. It provides both an introductory text and a valuable overview of the entire field.

Download or read book Nanophotonics with Surface Plasmons written by and published by Elsevier. This book was released on 2006-12-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current developments in optical technologies are being directed toward nanoscale devices with subwavelength dimensions, in which photons are manipulated on the nanoscale. Although light is clearly the fastest means to send information to and from the nanoscale, there is a fundamental incompatibility between light at the microscale and devices and processes at the nanoscale. Nanostructured metals which support surface plasmon modes can concentrate electromagnetic (EM) fields to a small fraction of a wavelength while enhancing local field strengths by several orders of magnitude. For this reason, plasmonic nanostructures can serve as optical couplers across the nano–micro interface: metal–dielectric and metal–semiconductor nanostructures can act as optical nanoantennae and enhance light matter coupling in nanoscale devices. This book describes how one can fully integrate plasmonic nanostructures into dielectric, semiconductor, and molecular photonic devices, for guiding photons across the nano–micro interface and for detecting molecules with unsurpassed sensitivity.·Nanophotonics and Nanoplasmonics·Metamaterials and negative-index materials·Plasmon-enhanced sensing and spectroscopy·Imaging and sensing on the nanoscale·Metal Optics