Download or read book Index of Conference Proceedings Received written by British Library. Lending Division and published by . This book was released on 1984-07 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Electrolyte Fuel Cell Durability written by Felix N. Büchi and published by Springer Science & Business Media. This book was released on 2009-02-08 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a significant number of R&D projects, performed mostly after 2000, devoted to the understanding and prevention of performance degradation processes in polymer electrolyte fuel cells (PEFCs). The extent and severity of performance degradation processes in PEFCs were recognized rather gradually. Indeed, the recognition overlapped with a significant number of industrial dem- strations of fuel cell powered vehicles, which would suggest a degree of technology maturity beyond the resaolution of fundamental failure mechanisms. An intriguing question, therefore, is why has there been this apparent delay in addressing fun- mental performance stability requirements. The apparent answer is that testing of the power system under fully realistic operation conditions was one prerequisite for revealing the nature and extent of some key modes of PEFC stack failure. Such modes of failure were not exposed to a similar degree, or not at all, in earlier tests of PEFC stacks which were not performed under fully relevant conditions, parti- larly such tests which did not include multiple on–off and/or high power–low power cycles typical for transportation and mobile power applications of PEFCs. Long-term testing of PEFCs reported in the early 1990s by both Los Alamos National Laboratory and Ballard Power was performed under conditions of c- stant cell voltage, typically near the maximum power point of the PEFC.

Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

Download or read book Carbon Black written by Jean-Baptiste Donnet and published by Routledge. This book was released on 2018-05-04 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this reference provides comprehensive examinations of developments in the processing and applications of carbon black, including the use of new analytical tools such as scanning tunnelling microscopy, Fourier transform infrared spectroscopy and inverse gas chromatography.;Completely rewritten and updated by numerous experts in the field to reflect the enormous growth of the field since the publication of the previous edition, Carbon Black: discusses the mechanism of carbon black formation based on recent advances such as the discovery of fullerenes; elucidates micro- and macrostructure morphology and other physical characteristics; outlines the fractal geometry of carbon black as a new approach to characterization; reviews the effect of carbon black on the electrical and thermal conductivity of filled polymers; delineates the applications of carbon black in elastomers, plastics, and zerographic toners; and surveys possible health consequences of exposure to carbon black.;With over 1200 literature citations, tables, and figures, this resource is intended for physical, polymer, surface and colloid chemists; chemical and plastics engineers; spectroscopists; materials scientists; occupational safety and health physicians; and upper-level undergraduate and graduate students in these disciplines.

Download or read book Organic Trace Analysis written by Reinhard Nießner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-08-07 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Organic Trace Analysis" presents the basics of trace analysis, from sample preparation to the measurement: Students are introduced to statistical evaluation, quality control technologies, sampling and preparation of organic traces, as well as to enrichment and separation of samples. Spectroscopic techniques as chromatography, capillary electrophoresis, mass spectrometry, and receptor-based bioanalysis are presented in detail.

Download or read book The Craft and Science of Coffee written by Britta Folmer and published by Academic Press. This book was released on 2016-12-16 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Craft and Science of Coffee follows the coffee plant from its origins in East Africa to its current role as a global product that influences millions of lives though sustainable development, economics, and consumer desire.For most, coffee is a beloved beverage. However, for some it is also an object of scientifically study, and for others it is approached as a craft, both building on skills and experience. By combining the research and insights of the scientific community and expertise of the crafts people, this unique book brings readers into a sustained and inclusive conversation, one where academic and industrial thought leaders, coffee farmers, and baristas are quoted, each informing and enriching each other.This unusual approach guides the reader on a journey from coffee farmer to roaster, market analyst to barista, in a style that is both rigorous and experience based, universally relevant and personally engaging. From on-farming processes to consumer benefits, the reader is given a deeper appreciation and understanding of coffee's complexity and is invited to form their own educated opinions on the ever changing situation, including potential routes to further shape the coffee future in a responsible manner. - Presents a novel synthesis of coffee research and real-world experience that aids understanding, appreciation, and potential action - Includes contributions from a multitude of experts who address complex subjects with a conversational approach - Provides expert discourse on the coffee calue chain, from agricultural and production practices, sustainability, post-harvest processing, and quality aspects to the economic analysis of the consumer value proposition - Engages with the key challenges of future coffee production and potential solutions

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.

Download or read book Proceedings of the 2007 National Conference on Environmental Science and Technology written by Godfrey Uzochukwu and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third National Conference on Environmental Science and Technology was held in Greensboro, NC, on September 12-14, 2007. This book contains the following topics: pollution prevention, fate and transport of contaminants, bioremediation, bio-processing, innovative environmental technologies, global climate change, and environmental justice.

Download or read book Crown Ethers and Phase Transfer Catalysis in Polymer Science written by Lon Mathias and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase transfer catalysis or interfacial catalysis is a syn thetic technique involving transport of an organic or inorganic salt from a solid or aqueous phase into an organic liquid where reaction with an organic-soluble substrate takes place. Over the past 15 years there has been an enormous amount of effort invested in the development of this technique in organic synthe sis. Several books and numerous review articles have appeared summarizing applications in which low molecular weight catalysts are employed. These generally include either crown ethers or onium salts of various kinds. While the term phase transfer catalysis is relatively new, the concept of using a phasetrans fer agent (PTA) is much older~ Both Schnell and Morgan employed such catalysts in synthesis of polymeric species in the early 1950's. Present developments are really extensions of these early applications. It has only been within the last several years that the use of phase transfer processes have been employed in polymer synthesis and modification. Similarly, the use of polymer-bound phase transfer agents is also a recent development. These and related areas have nonetheless enjoyed explosive growth as mea sured by the number of publications and the variety of applica tions which have appeared. Several reviews dealing with these l 6 polymer-related investigations have been published.

Download or read book Chemical Applications of Synchrotron Radiation X ray applications written by Tsun-Kong Sham and published by World Scientific. This book was released on 2002 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tattooed Skin and Health written by J. Serup and published by Karger Medical and Scientific Publishers. This book was released on 2015-03-26 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: With about 10–20% of the adult population in Europe being tattooed, there is a strong demand for publications discussing the various issues related to tattooed skin and health. Until now, only a few scientific studies on tattooing have been published. This book discusses different aspects of the various medical risks associated with tattoos, such as allergic reactions from red tattoos, papulo-nodular reactions from black tattoos as well as technical and psycho-social complications, in addition to bacterial and viral infections. Further sections are dedicated to the composition of tattoo inks, and a case is made for the urgent introduction of national and international regulations. Distinguished authors, all specialists in their particular fields, have contributed to this publication which provides a comprehensive view of the health implications associated with tattooing. The book covers a broad range of topics that will be of interest to clinicians and nursing staff, toxicologists and regulators as well as laser surgeons who often face the challenge of having to remove tattoos, professional tattooists and producers of tattoo ink.

Download or read book Zeolite Microporous Solids Synthesis Structure and Reactivity written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensive research on zeolites, during the past thirty years, has resulted in a deep understanding of their chemistry and in a true zeolite science, including synthesis, structure, chemical and physical properties, and catalysis. These studies are the basis for the development and growth of several industrial processes applying zeolites for selective sorption, separation, and catalysis. In 1983, a NATO Advanced Study Institute was organized in Alcabideche (portugal) to establish the State-of-the-Art in Zeolite Science and Technology and to contribute to a better understanding of the structural properties of zeolites, the configurational constraints they may exert, and their effects in adsorption, diffusion, and catalysis. Since then, zeolite science has witnessed an almost exponential growth in published papers and patents, dealing with both fundamentals issues and original applications. The proposal of new procedures for zeolite synthesis, the development of novel and sophisticated physical techniques for zeolite characterization, the discovery of new zeolitic and related microporous materials, progresses in quantum chemistry and molecular modeling of zeolites, and the application of zeolites as catalysts for organic reactions have prompted increasing interest among the scientific community. An important and harmonious interaction between various domains of Physics, Chemistry, and Engineering resulted therefrom.

Download or read book Handbook of Biodegradable Polymers written by Catia Bastioli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-03-09 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers characteristics, processability and application areas of biodegradable polymers, with key polymer family groups discussed. It explores the role of biodegradable polymers in different waste management practices including anaerobic digestion, and considers topics such as the different types of biorefineries for renewable monomers used in producing the building blocks for biodegradable polymers.

Download or read book Air Quality Criteria for Particulate Matter written by National Center for Environmental Assessment (Research Triangle Park, N.C.) and published by . This book was released on 1996 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Separation Process Technology written by Ronald W. Rousseau and published by John Wiley & Sons. This book was released on 1987-05-13 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the selection, design, and operation of most of the industrially important separation processes. Discusses the underlying principles on which the processes are based, and provides illustrative examples of the use of the processes in a modern context. Features thorough treatment of newer separation processes based on membranes, adsorption, chromatography, ion exchange, and chemical complexation. Includes a review of historically important separation processes such as distillation, absorption, extraction, leaching, and crystallization and considers these techniques in light of recent developments affecting them.

Download or read book Food Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2009-07-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mixing of liquids, solids and gases is one of the most commonunit operations in the food industry. Mixing increases thehomogeneity of a system by reducing non-uniformity or gradients incomposition, properties or temperature. Secondary objectives ofmixing include control of rates of heat and mass transfer,reactions and structural changes. In food processing applications,additional mixing challenges include sanitary design, complexrheology, desire for continuous processing and the effects ofmixing on final product texture and sensory profiles. Mixing ensures delivery of a product with constant properties. Forexample, consumers expect all containers of soups, breakfastcereals, fruit mixes, etc to contain the same amount of eachingredient. If mixing fails to achieve the requiredproduct yield, quality, organoleptic or functional attributes,production costs may increase significantly. This volume brings together essential information on theprinciples and applications of mixing within food processing. Whilethere are a number of creditable references covering generalmixing, such publications tend to be aimed at the chemical industryand so topics specific to food applications are often neglected.Chapters address the underlying principles of mixing, equipmentdesign, novel monitoring techniques and the numerical techniquesavailable to advance the scientific understanding of food mixing.Food mixing applications are described in detail. The book will be useful for engineers and scientists who need tospecify and select mixing equipment for specific processingapplications and will assist with the identification and solving ofthe wide range of mixing problems that occur in the food,pharmaceutical and bioprocessing industries. It will also be ofinterest to those who teach, study and research food science andfood engineering.