Download or read book Some Effects of Metallic Substrate Composition on Degradation of Thermal Barrier Coatings written by and published by . This book was released on 1997 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comparisons have been made in laboratory isothermal and cyclic oxidation tests of the degradation of oxide scales grown on single crystal superalloy substrates and bond coating alloys intended for use in thermal barrier coatings systems. The influence of desulfurization of the superalloy and bond coating, of reactive element addition to the bond coating alloy, and of oxidation temperature on the spallation behavior of the alumina scales formed was assessed from oxidation kinetics and from SEM observations of the microstructure and composition of the oxide scales. Desulfurization of nickel-base superalloy (in the absence of a Y addition) resulted in an increase in the lifetime of a state-of-the-art thermal barrier coating applied to it compared to a Y-free, non-desulfurized version of the alloy. The lifetime of the same ceramic coating applied without a bond coating to a non-desulfurized model alloy that formed an ideal alumina scale was also found to be at least four times longer than on the Y-doped superalloy plus state-of-the-art bond coating combination. Some explanations are offered of the factors controlling the degradation of such coatings.
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. Includes coverage of emerging materials, such as rare-earth doped ceramics Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) Discusses the degradation of TBCs caused by CMAS attack and its protection Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book On the Degradation Mechanisms of Thermal Barrier Coatings written by Liberty Tse Shu Wu and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book High Temperature Surface Engineering written by J. Nicholls and published by CRC Press. This book was released on 2020-01-31 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last forty years a wide range of surface coatings have been developed to address the surface stability and thermal insulation of materials used in the gas turbine section of aero, industrial and land-based power generation equipment. High Temperature Surface Engineering, the Proceedings of the Sixth International Conference in the Series ‘Engineering the Surfaces’, reviews the surfacing technologies appropriate to oxidation, corrosion and thermal protection. Factors which underpin their choice for any given application are discussed in the proceedings. This highlights the importance of developing representative mechanical and physical test methods to elucidate coating degradation modes as an aid to establishing coating systems with improved engineering performance. During the organisation of the conference and in the compiling of this book we have been privileged to work with many of the leading specialists in the field of High Temperature Surface Engineering and it is our hope that this book will be a valuable reference guide for Engineers and Material Scientists.
Download or read book 26th Annual Conference on Composites Advanced Ceramics Materials and Structures B Volume 23 Issue 4 written by Hua-Tay Lin and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Science and Technology of Thermal Barrier Coatings written by Yeon-Gil Jung and published by MDPI. This book was released on 2021-03-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: TBC materials in the hot components of a gas turbine are exposed to extremely harsh environments. Therefore, the evaluation of various environmental factors in applying new TBCs is essential. Understanding the mechanisms for degradation which occur in comprehensive environments plays an important role in preventing it and improving the lifetime performance. The development of novel coating techniques can also have a significant impact on lifetime performance as they can alter the microstructure of the coating and alter the various properties resulting from it. This Special Issue presents an original research paper that reports the development of novel TBCs, particularly the application of advanced deposition techniques and novel materials.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Progress in Thermal Barrier Coatings written by ACerS (American Ceramics Society, The) and published by John Wiley & Sons. This book was released on 2009-07-15 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the Progress in Ceramic Technology series compiles articles published on thermal barrier coatings (TBCs) by The American Ceramic Society (ACerS). It collects in one resource the current research papers on materials-related aspects of thermal barrier coatings and associated technologies. Logically organized and carefully selected, the papers in this edition divide into six categories: Applications Material Improvements and Novel Compositions Developments in Processing Mechanical Properties Thermal Properties Citations follow each title in the table of contents, making this a key resource for professionals and academia.
Download or read book Coatings for High Temperature Environments written by Amirhossein Pakseresht and published by Springer Nature. This book was released on 2023-12-05 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the recent trends in high-temperature coatings that are used to provide oxidation and wear resistance to metallic/ceramic components in extreme environments. Ceramics, intermetallics, organosilicon polymers, cermets, and other materials with great thermal stability have long been recognized for these applications. This book introduces the state of the art in coating materials and processes for high-temperature environments and identifies areas for improvement in materials selection, performance upgrades, design considerations, and manufacturing methods. The book covers a variety of high-temperature coatings prepared through various synthesis processes such as thermal spraying, physical vapor deposition, electrodeposition, and sol–gel methods. It covers corrosion/oxidation, phase stability, and thermal and mechanical behavior of high-temperature coating materials having greater thermal stability. With contributions from international researchers active in the field, this edited book features the most recent and up-to-date literature references for a broad readership consisting of academic and industrial professionals. It is suitable for graduate students as well as scientists and engineers working in the area of anti-corrosion and anti-wear resistant high-temperature coatings for industrial applications.
Download or read book 26th Annual Conference on Composites Advanced Ceramics Materials and Structures A B written by and published by . This book was released on 2002 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Barrier Coatings Failure Theory and Evaluation Technology written by Yichun Zhou and published by Springer Nature. This book was released on 2022-10-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the failure theories and evaluation techniques of thermal barrier coatings, covering the thermal-mechanical–chemical coupling theories, performance and damage characterization techniques, and related evaluations. Thermal barrier coatings are the key thermal protection materials for high-temperature components in advanced aeroengines. Coating spallation is a major technical bottleneck faced by researchers. The extremely complex microstructure, diverse service environments, and failure behaviors bring challenges to the spallation analysis in terms of the selective use of mechanical theories, experimental methods, and testing platforms. In the book, the authors provide a systematic summary of the latest research and technological advances and present their insights and findings in the past couple of decades. This book is not only suitable for researchers and engineers in thermal barrier coatings and related fields but also a good reference for upper-undergraduate and postgraduate students of materials science and mechanics majors.
Download or read book Elevated Temperature Coatings written by Narendra B. Dahorte and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings focuses on processing and characterizing high-temperature coatings with regard to engineering, physical, and chemical properties. It includes the synthesis of new and unconventional coating materials and addresses various existing methods along with novel and innovative techniques of producing coatings and their applications.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopy of Oxidation written by Gordon Tatlock and published by . This book was released on 2000 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
