Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Advances in Robot Kinematics 2024 written by Jadran Lenarčič and published by Springer Nature. This book was released on with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adaptive and Natural Computing Algorithms written by Bernadete Ribeiro and published by Springer Science & Business Media. This book was released on 2005-03-08 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present theoretical insights and report practical applications both for neural networks, genetic algorithms and evolutionary computation. In the field of natural computing, swarm optimization, bioinformatics and computational biology contributions are no less compelling. A wide selection of contributions report applications of neural networks to process engineering, robotics and control. Contributions also abound in the field of evolutionary computation particularly in combinatorial and optimization problems. Many papers are dedicated to machine learning and heuristics, hybrid intelligent systems and soft computing applications. Some papers are devoted to quantum computation. In addition, kernel based algorithms, able to solve tasks other than classification, represent a revolution in pattern recognition bridging existing gaps. Further topics are intelligent signal processing and computer vision.
Download or read book Parallel Problem Solving from Nature PPSN XIII written by Thomas Bartz-Beielstein and published by Springer. This book was released on 2014-09-11 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Parallel Problem Solving from Nature, PPSN 2013, held in Ljubljana, Slovenia, in September 2014. The total of 90 revised full papers were carefully reviewed and selected from 217 submissions. The meeting began with 7 workshops which offered an ideal opportunity to explore specific topics in evolutionary computation, bio-inspired computing and metaheuristics. PPSN XIII also included 9 tutorials. The papers are organized in topical sections on adaption, self-adaption and parameter tuning; classifier system, differential evolution and swarm intelligence; coevolution and artificial immune systems; constraint handling; dynamic and uncertain environments; estimation of distribution algorithms and metamodelling; genetic programming; multi-objective optimisation; parallel algorithms and hardware implementations; real world applications; and theory.
Download or read book Robot Control 1991 SYROCO 91 written by I. Troch and published by Elsevier. This book was released on 2014-05-23 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 92 papers on the state-of-the-art in robotics research. In this volume topics on modelling and identification are treated first as they build the basis for practically all control aspects. Then, the most basic control tasks are discussed i.e. problems of inverse kinematics. Groups of papers follow which deal with various advanced control aspects. They range from rather general methods to more specialized topics such as force control and control of hydraulic robots. The problem of path planning is addressed and strategies for robots with one arm, for mobile robots and for multiple arm robots are presented. Also covered are computational improvements and software tools for simulation and control, the integration of sensors and sensor signals in robot control.
Download or read book Kinematic Synthesis of Linkages written by Richard Scheunemann Hartenberg and published by . This book was released on 1964 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Robot Kinematics and Computational Geometry written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, research in robot kinematics has attracted researchers with different theoretical profiles and backgrounds, such as mechanical and electrica! engineering, computer science, and mathematics. It includes topics and problems that are typical for this area and cannot easily be met elsewhere. As a result, a specialised scientific community has developed concentrating its interest in a broad class of problems in this area and representing a conglomeration of disciplines including mechanics, theory of systems, algebra, and others. Usually, kinematics is referred to as the branch of mechanics which treats motion of a body without regard to the forces and moments that cause it. In robotics, kinematics studies the motion of robots for programming, control and design purposes. It deals with the spatial positions, orientations, velocities and accelerations of the robotic mechanisms and objects to be manipulated in a robot workspace. The objective is to find the most effective mathematical forms for mapping between various types of coordinate systems, methods to minimise the numerical complexity of algorithms for real-time control schemes, and to discover and visualise analytical tools for understanding and evaluation of motion properties ofvarious mechanisms used in a robotic system.
Download or read book Robot Mechanisms written by Jadran Lenarcic and published by Springer Science & Business Media. This book was released on 2012-06-12 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the area of robot mechanisms, primarily considering industrial manipulators and humanoid arms. The book is intended for both teaching and self-study. Emphasis is given to the fundamentals of kinematic analysis and the design of robot mechanisms. The coverage of topics is untypical. The focus is on robot kinematics. The book creates a balance between theoretical and practical aspects in the development and application of robot mechanisms, and includes the latest achievements and trends in robot science and technology.
Download or read book Introduction to Autonomous Robots written by Nikolaus Correll and published by MIT Press. This book was released on 2022-12-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the field of autonomous robotics aimed at upper-level undergraduates and offering additional online resources. Textbooks that provide a broad algorithmic perspective on the mechanics and dynamics of robots almost unfailingly serve students at the graduate level. Introduction to Autonomous Robots offers a much-needed resource for teaching third- and fourth-year undergraduates the computational fundamentals behind the design and control of autonomous robots. The authors use a class-tested and accessible approach to present progressive, step-by-step development concepts, alongside a wide range of real-world examples and fundamental concepts in mechanisms, sensing and actuation, computation, and uncertainty. Throughout, the authors balance the impact of hardware (mechanism, sensor, actuator) and software (algorithms) in teaching robot autonomy. Features: Rigorous and tested in the classroom Written for engineering and computer science undergraduates with a sophomore-level understanding of linear algebra, probability theory, trigonometry, and statistics QR codes in the text guide readers to online lecture videos and animations Topics include: basic concepts in robotic mechanisms like locomotion and grasping, plus the resulting forces; operation principles of sensors and actuators; basic algorithms for vision and feature detection; an introduction to artificial neural networks, including convolutional and recurrent variants Extensive appendices focus on project-based curricula, pertinent areas of mathematics, backpropagation, writing a research paper, and other topics A growing library of exercises in an open-source, platform-independent simulation (Webots)
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Advances in Robot Kinematics Motion in Man and Machine written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?rst International Meeting of Advances in Robot Kinematics, ARK, occurred in September 1988, by invitation to Ljubljana, Slovenia, of a group of 20 int- nationally recognized researchers, representing six different countries from three continents. There were 22 lectures and approximately 150 attendees. This success of bringing together excellent research and the international community, led to the formation of a Scienti?c Committee and the decision to repeat the event biannually. The meeting was made open to all individuals with a critical peer review process of submitted papers. The meetings have since been continuously supported by the Jozef ? Stefan Institute and since 1992 have come under patronage of the Inter- tionalFederationforthePromotionofMechanismandMachineScience(IFToMM). Springer published the ?rst book of the series in 1991 and since 1994 Kluwer and Springer have published a book of the presented papers every two years. The papers in this book present the latest topics and methods in the kinem- ics, control and design of robotic manipulators. They consider the full range of - botic systems, including serial, parallel and cable driven manipulators, both planar and spatial. The systems range from being less than fully mobile to kinematically redundant to overconstrained. The meeting included recent advances in emerging areas such as the design and control of humanoids and humanoid subsystems, the analysis, modeling and simulation of human body motion, the mobility analysis of protein molecules and the development of systems which integrate man and - chine.
Download or read book Advances in Robot Kinematics Analysis and Design written by Jadran Lenarčič and published by Springer Science & Business Media. This book was released on 2008-05-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in the theory, design, control and application of robotic systems, which are intended for a variety of purposes such as manipulation, manufacturing, automation, surgery, locomotion and biomechanics.
Download or read book Nonlinear Computational Geometry written by Ioannis Z. Emiris and published by Springer Science & Business Media. This book was released on 2009-10-28 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: An original motivation for algebraic geometry was to understand curves and surfaces in three dimensions. Recent theoretical and technological advances in areas such as robotics, computer vision, computer-aided geometric design and molecular biology, together with the increased availability of computational resources, have brought these original questions once more into the forefront of research. One particular challenge is to combine applicable methods from algebraic geometry with proven techniques from piecewise-linear computational geometry (such as Voronoi diagrams and hyperplane arrangements) to develop tools for treating curved objects. These research efforts may be summarized under the term nonlinear computational geometry. This volume grew out of an IMA workshop on Nonlinear Computational Geometry in May/June 2007 (organized by I.Z. Emiris, R. Goldman, F. Sottile, T. Theobald) which gathered leading experts in this emerging field. The research and expository articles in the volume are intended to provide an overview of nonlinear computational geometry. Since the topic involves computational geometry, algebraic geometry, and geometric modeling, the volume has contributions from all of these areas. By addressing a broad range of issues from purely theoretical and algorithmic problems, to implementation and practical applications this volume conveys the spirit of the IMA workshop.
Download or read book Bio inspired computation and its applications written by Tinggui Chen and published by Frontiers Media SA. This book was released on 2023-07-06 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underwater Robots written by Gianluca Antonelli and published by Springer. This book was released on 2013-11-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the state of the art in underwater robotics experiments of dynamic control of an underwater vehicle. The author presents experimental results on motion control and fault tolerance to thrusters’ faults with the autonomous vehicle ODIN. This second substantially improved and expanded edition new features are presented dealing with fault-tolerant control and coordinated control of autonomous underwater vehicles.
Download or read book Advances in Reconfigurable Mechanisms and Robots I written by Jian S Dai and published by Springer Science & Business Media. This book was released on 2012-06-13 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Reconfigurable Mechanisms and Robots I provides a selection of key papers presented in The Second ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2012) held on 9th -11th July 2012 in Tianjin, China. This ongoing series of conferences will be covered in this ongoing collection of books. A total of seventy-eight papers are divided into seven parts to cover the topology, kinematics and design of reconfigurable mechanisms with the reconfiguration theory, analysis and synthesis, and present the current research and development in the field of reconfigurable mechanisms including reconfigurable parallel mechanisms. In this aspect, the recent study and development of reconfigurable robots are further presented with the analysis and design and with their control and development. The bio-inspired mechanisms and subsequent reconfiguration are explored in the challenging fields of rehabilitation and minimally invasive surgery. Advances in Reconfigurable Mechanisms and Robots I further extends the study to deployable mechanisms and foldable devices and introduces applications of reconfigurable mechanisms and robots. The rich-content of Advances in Reconfigurable Mechanisms and Robots I brings together new developments in reconfigurable mechanisms and robots and presents a new horizon for future development in the field of reconfigurable mechanisms and robots.
Download or read book International Journal of Robotics Automation written by and published by . This book was released on 1989 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:
