Download or read book Solving Fault Diagnosis Problems written by Andreas Varga and published by Springer. This book was released on 2017-02-14 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses fault detection and isolation topics from a computational perspective. Unlike most existing literature, it bridges the gap between the existing well-developed theoretical results and the realm of reliable computational synthesis procedures. The model-based approach to fault detection and diagnosis has been the subject of ongoing research for the past few decades. While the theoretical aspects of fault diagnosis on the basis of linear models are well understood, most of the computational methods proposed for the synthesis of fault detection and isolation filters are not satisfactory from a numerical standpoint. Several features make this book unique in the fault detection literature: Solution of standard synthesis problems in the most general setting, for both continuous- and discrete-time systems, regardless of whether they are proper or not; consequently, the proposed synthesis procedures can solve a specific problem whenever a solution exists Emphasis on the best numerical algorithms to solve the synthesis problems for linear systems in generalized state-space form (also known as descriptor systems) Development of general synthesis procedures relying on new computational paradigms, such as factorization-based design based on filter updating techniques and nullspace-based synthesis Availability of a comprehensive set of free accompanying software tools for descriptor systems, which allows readers to easily implement all synthesis procedures presented in the book and ensures that all results are reproducible This book is primarily intended for researchers and advanced graduate students in the areas of fault diagnosis and fault-tolerant control. It will also appeal to mathematicians with an interest in control-oriented numerics.

Download or read book Fault Diagnosis Inverse Problems Solution with Metaheuristics written by Lídice Camps Echevarría and published by Springer. This book was released on 2018-05-28 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a methodology based on inverse problems for use in solutions for fault diagnosis in control systems, combining tools from mathematics, physics, computational and mathematical modeling, optimization and computational intelligence. This methodology, known as fault diagnosis – inverse problem methodology or FD-IPM, unifies the results of several years of work of the authors in the fields of fault detection and isolation (FDI), inverse problems and optimization. The book clearly and systematically presents the main ideas, concepts and results obtained in recent years. By formulating fault diagnosis as an inverse problem, and by solving it using metaheuristics, the authors offer researchers and students a fresh, interdisciplinary perspective for problem solving in these fields. Graduate courses in engineering, applied mathematics and computing also benefit from this work.

Download or read book Intelligent Problem Solving Methodologies and Approaches written by Rasiah Logananthara and published by Springer. This book was released on 2003-07-31 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the papers presented in these proceedings is on employing various methodologies and approaches for solving real-life problems. Although the mechanisms that the human brain employs to solve problems are not yet completely known, we do have good insight into the functional processing performed by the human mind. On the basis of the understanding of these natural processes, scientists in the field of applied intelligence have developed multiple types of artificial processes, and have employed them successfully in solving real-life problems. The types of approaches used to solve problems are dependant on both the nature of the problem and the expected outcome. While knowledge-based systems are useful for solving problems in well-understood domains with relatively stable environments, the approach may fail when the domain knowledge is either not very well understood or changing rapidly. The techniques of data discovery through data mining will help to alleviate some problems faced by knowledge-based approaches to solving problems in such domains. Research and development in the area of artificial intelligence are influenced by opportunity, needs, and the availability of resources. The rapid advancement of Internet technology and the trend of increasing bandwidths provide an opportunity and a need for intelligent information processing, thus creating an excellent opportunity for agent-based computations and learning. Over 40% of the papers appearing in the conference proceedings focus on the area of machine learning and intelligent agents - clear evidence of growing interest in this area.

Download or read book Data driven Design of Fault Diagnosis and Fault tolerant Control Systems written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2014-04-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and demonstrated on industrial case systems. Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems will be of interest to process and control engineers, engineering students and researchers with a control engineering background.

Download or read book Solving Fault Diagnosis Problems written by Andreas Varga and published by . This book was released on 2017 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.

Download or read book Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems written by Hamid Reza Karimi and published by Elsevier. This book was released on 2021-06-14 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems gives a systematic description of the many facets of envisaging, designing, implementing, and experimentally exploring emerging trends in fault diagnosis and failure prognosis in mechanical, electrical, hydraulic and biomedical systems. The book is devoted to the development of mathematical methodologies for fault diagnosis and isolation, fault tolerant control, and failure prognosis problems of engineering systems. Sections present new techniques in reliability modeling, reliability analysis, reliability design, fault and failure detection, signal processing, and fault tolerant control of engineering systems. Sections focus on the development of mathematical methodologies for diagnosis and prognosis of faults or failures, providing a unified platform for understanding and applicability of advanced diagnosis and prognosis methodologies for improving reliability purposes in both theory and practice, such as vehicles, manufacturing systems, circuits, flights, biomedical systems. This book will be a valuable resource for different groups of readers - mechanical engineers working on vehicle systems, electrical engineers working on rotary machinery systems, control engineers working on fault detection systems, mathematicians and physician working on complex dynamics, and many more. Presents recent advances of theory, technological aspects, and applications of advanced diagnosis and prognosis methodologies in engineering applications Provides a series of the latest results, including fault detection, isolation, fault tolerant control, failure prognosis of components, and more Gives numerical and simulation results in each chapter to reflect engineering practices

Download or read book Logarithmic Similarity Measure between Interval Valued Fuzzy Sets and Its Fault Diagnosis Method written by Zhikang Lu and published by Infinite Study. This book was released on with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault diagnosis is an important task for the normal operation and maintenance of equipment. In many real situations, the diagnosis data cannot provide deterministic values and are usually imprecise or uncertain. Thus, interval-valued fuzzy sets (IVFSs) are very suitable for expressing imprecise or uncertain fault information in real problems.

Download or read book Sensors Fault Diagnosis Trends and Applications written by Piotr Witczak and published by MDPI. This book was released on 2021-09-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault diagnosis has always been a concern for industry. In general, diagnosis in complex systems requires the acquisition of information from sensors and the processing and extracting of required features for the classification or identification of faults. Therefore, fault diagnosis of sensors is clearly important as faulty information from a sensor may lead to misleading conclusions about the whole system. As engineering systems grow in size and complexity, it becomes more and more important to diagnose faulty behavior before it can lead to total failure. In the light of above issues, this book is dedicated to trends and applications in modern-sensor fault diagnosis.

Download or read book Model Based Fault Diagnosis Techniques written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2012-12-20 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guaranteeing a high system performance over a wide operating range is an important issue surrounding the design of automatic control systems with successively increasing complexity. As a key technology in the search for a solution, advanced fault detection and identification (FDI) is receiving considerable attention. This book introduces basic model-based FDI schemes, advanced analysis and design algorithms, and mathematical and control-theoretic tools. This second edition of Model-Based Fault Diagnosis Techniques contains: • new material on fault isolation and identification and alarm management; • extended and revised treatment of systematic threshold determination for systems with both deterministic unknown inputs and stochastic noises; • addition of the continuously-stirred tank heater as a representative process-industrial benchmark; and • enhanced discussion of residual evaluation which now deals with stochastic processes. Model-based Fault Diagnosis Techniques will interest academic researchers working in fault identification and diagnosis and as a text it is suitable for graduate students in a formal university-based course or as a self-study aid for practising engineers working with automatic control or mechatronic systems from backgrounds as diverse as chemical process and power engineering.

Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by Elsevier. This book was released on 2007-03-01 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools

Download or read book Learning to Solve Problems written by David H. Jonassen and published by Routledge. This book was released on 2010-09-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive, up-to-date look at problem solving research and practice over the last fifteen years. The first chapter describes differences in types of problems, individual differences among problem-solvers, as well as the domain and context within which a problem is being solved. Part one describes six kinds of problems and the methods required to solve them. Part two goes beyond traditional discussions of case design and introduces six different purposes or functions of cases, the building blocks of problem-solving learning environments. It also describes methods for constructing cases to support problem solving. Part three introduces a number of cognitive skills required for studying cases and solving problems. Finally, Part four describes several methods for assessing problem solving. Key features includes: Teaching Focus – The book is not merely a review of research. It also provides specific research-based advice on how to design problem-solving learning environments. Illustrative Cases – A rich array of cases illustrates how to build problem-solving learning environments. Part two introduces six different functions of cases and also describes the parameters of a case. Chapter Integration – Key theories and concepts are addressed across chapters and links to other chapters are made explicit. The idea is to show how different kinds of problems, cases, skills, and assessments are integrated. Author expertise – A prolific researcher and writer, the author has been researching and publishing books and articles on learning to solve problems for the past fifteen years. This book is appropriate for advanced courses in instructional design and technology, science education, applied cognitive psychology, thinking and reasoning, and educational psychology. Instructional designers, especially those involved in designing problem-based learning, as well as curriculum designers who seek new ways of structuring curriculum will find it an invaluable reference tool.

Download or read book Human Detection and Diagnosis of System Failures written by Jens Rasmussen and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes all of the papers presented at the NATO Symposium on Human Detection and Diagnosis of System Failures held at Roskilde, Denmark on August 4-8, 1980. The Symposium was sponsored by the Scientific Affairs Division of NATO and the Rise National Laboratory of Denmark. The goal of the Symposium was to continue the tradition initiated by the NATO Symposium on Monitoring Behavior and Supervisory Control held in Berchtesgaden, F .R. Germany in 1976 and the NATO Symposium on Theory and Measurement of Mental Workload held in Mati, Greece in 1977. To this end, a group of 85 psychologists and engineers coming from industry, government, and academia convened to discuss, and to generate a "state-of-the-art" consensus of the problems and solutions associated with the human IS ability to cope with the increasing scale of consequences of failures within complex technical systems. The Introduction of this volume reviews their findings. The Symposium was organized to include brief formal presentations of papers sent to participants about two months in advance of the meeting, and considerable discussion both during plenary sessions and within more specialized workshops. Summaries of the discussions and workshop reports appear in this volume.

Download or read book Advanced methods for fault diagnosis and fault tolerant control written by Steven X. Ding and published by Springer Nature. This book was released on 2020-11-24 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book is to introduce advanced design and (online) optimization methods for fault diagnosis and fault-tolerant control from different aspects. Under the aspect of system types, fault diagnosis and fault-tolerant issues are dealt with for linear time-invariant and time-varying systems as well as for nonlinear and distributed (including networked) systems. From the methodological point of view, both model-based and data-driven schemes are investigated.To allow for a self-contained study and enable an easy implementation in real applications, the necessary knowledge as well as tools in mathematics and control theory are included in this book. The main results with the fault diagnosis and fault-tolerant schemes are presented in form of algorithms and demonstrated by means of benchmark case studies. The intended audience of this book are process and control engineers, engineering students and researchers with control engineering background.

Download or read book Empirical Foundations of Information and Software Science V written by Pranas Zunde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the Sixth Symposium on Empirical Foundations of Information and Software Sciences (EFISS), which was held in Atlanta, Georgia, on October 19-21, 1988. The purpose of the symposia is to explore subjects and methods of scientific inquiry which are of common interest to information and software sciences, and to identify directions of research that would benefit from the mutual interaction of these two disciplines. The main theme of the sixth symposium was modeling in information and software engineering, with emphasis on methods and tools of modeling. The symposium covered topics such as models of individual and organizational users of information systems, methods of selecting appropriate types of models for a given type of users and a given type of tasks, deriving models from records of system usage, modeling system evolution, constructing user and task models for adaptive systems, and models of system architectures. This symposium was sponsored by the School of Information and Computer Science of the Georgia Institute of Technology and by the U.S. Army Institute for Research in Management Information, Communications, and Computer Sciences (AIRMICS). 17le Editors vii CONTENTS 1 I. KEYNOTE ADDRESS ............................................. .

Download or read book Computational Intelligence in Fault Diagnosis written by Vasile Palade and published by Springer Science & Business Media. This book was released on 2006-12-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent concerns and research results in industrial fault diagnosis using intelligent techniques. It focuses on computational intelligence applications to fault diagnosis with real-world applications used in different chapters to validate the different diagnosis methods. The book includes one chapter dealing with a novel coherent fault diagnosis distributed methodology for complex systems.

Download or read book Advances in Abrasive Technology XII written by Han Huang and published by Trans Tech Publications Ltd. This book was released on 2009-06-24 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 12th International Symposium on Advances in Abrasive Technology (ISAAT 2009), 27-30 September 2009, Gold Coast, Australia