Download or read book Solution Precursor Plasma Spray System written by Noppakun Sanpo and published by Springer. This book was released on 2014-06-17 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief describes the influence of the different organic chelating agents on the topography, physical properties and phases of SPPS-deposited spinel ferrite splats. The author describes how by using the SPPS process, the coating is produced directly from a solution precursor and how all physical and chemical reactions such as evaporation, decomposition, crystallization and coating formation occur in a single step. The author details not only the innovative approach to liquid feeding, but also focuses on its effects on the spinel ferrite system. The results of experimentation as well as detailed explanations of the experiments are included.
Download or read book Thermal Spray 2004 written by and published by ASM International. This book was released on 2004-01-01 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Thermal Spray 2007 Global Coating Solutions Proceedings of the 2007 International Thermal Spray Conference written by Edited by Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, Ghislain Montavon and published by ASM International. This book was released on with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Nanoceramic and Nanocomposite Coatings and Materials written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-05-08 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new handbook, top researchers from around the world discuss recent academic and industrial advances in designing ceramic coatings and materials. They describe the role of nanotechnology in designing high performance nanoceramic coatings and materials in terms of the unique advantages that can be gained from the nano scale, including the latest techniques for the synthesis and processing of ceramic and composite coatings for different applications. Focuses on the most advanced technologies for industry-oriented nano-ceramic and nano-composite coatings, including recent challenges for scaling up nano-based coatings in industry Covers the latest evaluation methods for measuring coatings performance Discusses novel approaches for improving the performance of ceramic and composite coatings and materials via nanotechnology Provides the most recent and advanced techniques for surface characterization
Download or read book Advanced Ceramics for Photocatalytic Membranes written by Mohd Hafiz Dzarfan Othman and published by Elsevier. This book was released on 2024-05-18 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane filtration is becoming the technology of choice in liquid separations around the world for applications including desalination, pretreatment, removal of suspended solids from water and wastewater, for membrane bioreactors as well as food and beverage processing. Advanced Ceramics for Photocatalytic Membranes: Synthesis, Characterization and Applications in Water and Wastewater Treatment reviews recent research on the application and use of advanced ceramic materials in photocatalytic membrane processes. Divided over five main sections, the first section discusses current developments in photocatalytic membrane processes. The second and third sections focus on synthesis and fabrication techniques using either physical or chemical approaches. The remaining sections cover diverse characterization methods and performance evaluations, followed by various types of environmental applications. The book is not only limited to the conceptual theory, but it also gives a detailed review of recent progress in materials science. It presents applications in different disciplines, i.e., chemistry, physics, and mechanics, that are critically required in modern science and engineering. The book presents an across-the-board briefing of the field, which will be suitable for use as a major reference, as well as a knowledge sharing tool. Designed for both experts and newcomers alike, the book provides a comprehensive overview of the most recent advances in the field on the application and use of advanced ceramic materials in photocatalytic membrane processes. Provides a comprehensive review of advanced ceramic materials used in photocatalytic membranes Covers synthesis of ceramic membranes via both physical and chemical approaches Discusses materials characterization, properties, and performance analysis Covers modeling, simulation, and the theory of mass transfer mechanisms Features applications in water and wastewater treatment Discusses system scale up, economic viability, and cost analysis
Download or read book Advances in Bioceramics and Biocomposites II Volume 27 Issue 6 written by Mineo Mizuno and published by John Wiley & Sons. This book was released on 2009-09-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of ceramics in biological environments and biomedical applications is of increasing importance, as is the understanding of how biology works with minerals to develop strong materials. These proceedings contain papers that discuss the interface between biology and materials, presented at the Proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida. Organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division.
Download or read book Droplet and Spray Transport Paradigms and Applications written by Saptarshi Basu and published by Springer. This book was released on 2017-12-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on droplets and sprays and their applications. It discusses how droplet level transport is central to a multitude of applications and how droplet level manipulation and control can enhance the efficiency and design of multiphase systems. Droplets and sprays are ubiquitous in a variety of multiphase and multiscale applications in surface patterning, oil recovery, combustion, atomization, spray drying, thermal barrier coating, renewable energy, and electronic cooling, to name but a few. This book provides two levels of details pertaining to such applications. Each chapter delves into a specific application and provides not only an overview but also detailed physical insights into the application mechanism from the point of view of droplets and sprays. All chapters provide a mix of cutting-edge applications, new diagnostic techniques and modern computational methodologies, as well as the fundamental physical mechanism involved in each application. Taken together, the chapters provide a translational perspective on these applications, from basic transport processes to optimization, and from design to implementation using droplets or sprays as fundamental building blocks. Given its breadth of coverage, the book will be of interest to students, researchers, and industry professionals alike.
Download or read book Plasma at the Nanoscale written by Huaihe Song and published by Elsevier. This book was released on 2022-08-12 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma technology can facilitate the fabrication of nanomaterials and nanoscale structures. On the other hand, nanotechnology could be possibly used in plasma science. Several advanced nanomaterials and nanodevices could be used to fabricate nanoplasma (nanoscale plasma), such as nanoelectrodes, nanoantennae, nanolasers, nanoreactors, nanomagnets, nanosensors, nanobatteries, nanogenerator and supercapacitors. This book provides information on fundamental design concepts and promising applications of nanoplasma. It explains how, for the next generation of electronic devices with high data rate communications, a high-speed operation of electronic switches could be attained using nanoplasma. Similarly, in the field of heath and aesthetics, nanoplasma can be used as a non-surgical localized treatments for the face and neck, such as eyelid correction. In addition, various kinds of advanced nanostructures can be fabricated using the plasma technology Outlines the main properties of nanotechnology-enhanced plasma Discusses major applications of plasma technology Assesses the major challenges of manufacturing nanoplasma on an industrial scale
Download or read book Atmospheric Pressure Plasma written by Anton Nikiforov and published by BoD – Books on Demand. This book was released on 2019-04-24 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma as the fourth state of matter is an ionized gas consisting of both negative and positive ions, electrons, neutral atoms, radicals, and photons. In the last few decades, atmospheric-pressure plasmas have started to attract increasing attention from both scientists and industry due to a variety of potential applications. Because of increasing interest in the topic, the focus of this book is on providing engineers and scientists with a fundamental understanding of the physical and chemical properties of different atmospheric-pressure plasmas via plasma diagnostic techniques and their applications. The book has been organized into two parts. Part I focuses on the latest achievements in advanced diagnostics of different atmospheric-pressure plasmas. Part II deals with applications of different atmospheric-pressure plasmas.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Food Nanotechnology written by C. Anandharamakrishnan and published by CRC Press. This book was released on 2019-01-22 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology offers great potential to revolutionize conventional food science and the food industry. The use of nanotechnology in the food industry promises improved taste, flavor, color, texture, and consistency of foodstuffs and increased absorption and bioavailability of nutraceuticals. Food Nanotechnology: Principles and Applications examines the current state of nanoscale phenomena and processes, benefits and risks of nanotechnology. This work contains 18 chapters particularly focused on the design, production, and utilization of nanoparticles, with specific applications for the food industry. Through several studies, it has been proven that nanotechnology can offer distinct advantages over conventional methods in terms of functionality, targeted delivery of food bioactive compounds, improved food quality characteristics like texture, taste, sensory attributes and improved stability in the gastrointestinal tract, and controlled release profiles. Features Offers clear and concise coverage on application of nanotechnology in nutrient delivery, food packaging, and pathogen/pesticide detection Addresses both the technological aspects of delivering nano-based food products and the societal implications that affect take-up Covers broad range of topics including nanoemulsification, electrospraying, nanocomposites, plasma processing, and nanosensors Discusses different formulation and preparation methods for loading food bioactive compounds Exploratory in nature, this book presents the latest of such data on all aspects of applications of nanotechnology in food systems. With its practical focus on the fabrication and application of nanotechnology in food, this book is a valuable resource for students, researchers, food process engineers.
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. Includes coverage of emerging materials, such as rare-earth doped ceramics Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) Discusses the degradation of TBCs caused by CMAS attack and its protection Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book Nanotechnology and Nanomaterial Applications in Food Health and Biomedical Sciences written by Deepak Kumar Verma and published by CRC Press. This book was released on 2019-08-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume discusses the multitude of possibilities for new development in nanotechnology that focuses on overcoming the problems and challenges faced by the biomedical and food industries. The volume hopes to facilitate the development of devices and materials that benefit patients and their healthcare. The book is broken into three parts that cover: nanotechnology techniques for biomedical applications nanoparticles and materials for food, health, and pharmaceutical application potential applications of nanotechnology in food safety
Download or read book Advanced Ceramic Coatings for Energy Applications written by Ram Gupta and published by Elsevier. This book was released on 2024-02-16 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart ceramic coatings containing multifunctional components are now finding application in transportation and automotive industries, in electronics, and energy, sectors, in aerospace and defense, and in industrial goods and healthcare. Their wide application and stability in harsh environments are only possible due to the stability of the inorganic components that are used in ceramic coatings. Ceramic coatings are typically silicon nitride, chromia, hafnia, alumina, alumina-magnesia, silica, silicon carbide, titania, and zirconia-based compositions. The increased demand for these materials and their application in energy, transportation, and the automotive industry, are considered, to be the main drivers. Advanced Ceramic Coatings for Energy Applications covers recent developments in conducting electrodes, photovoltaics, solar cells, battery applications, fuel cells, electrocatalysts, photocatalysts and supercapacitors. The book is one of four volumes that together provide a comprehensive resource in the field of Advanced Ceramic Coatings, also including titles covering: fundamentals, manufacturing, and classification; biomedical applications; and emerging applications. The books will be extremely useful for academic and industrial researchers and practicing engineers who need to find reliable and up-to-date information about recent progresses and new developments in the field of advanced ceramic coatings. It will also be of value to early career scientists providing background knowledge to the field. Includes comprehensive coverage of advanced ceramic coatings for energy applications Features the latest progress and recent technological developments Includes comparisons to other coatings types (e.g., polymers, metals, and enamel) to demonstrate potential, limitations, and differences Contains extensive case studies and worked examples
Download or read book The Science and Engineering of Thermal Spray Coatings written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.
