Download or read book The Isogeometric Boundary Element Method written by Gernot Beer and published by Springer Nature. This book was released on 2019-09-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the introduction of isogeometric technology to the boundary element method (BEM) in order to establish an improved link between simulation and computer aided design (CAD) that does not require mesh generation. In the isogeometric BEM, non-uniform rational B-splines replace the Lagrange polynomials used in conventional BEM. This may seem a trivial exercise, but if implemented rigorously, it has profound implications for the programming, resulting in software that is extremely user friendly and efficient. The BEM is ideally suited for linking with CAD, as both rely on the definition of objects by boundary representation. The book shows how the isogeometric philosophy can be implemented and how its benefits can be maximised with a minimum of user effort. Using several examples, ranging from potential problems to elasticity, it demonstrates that the isogeometric approach results in a drastic reduction in the number of unknowns and an increase in the quality of the results. In some cases even exact solutions without refinement are possible. The book also presents a number of practical applications, demonstrating that the development is not only of academic interest. It then elegantly addresses heterogeneous and non-linear problems using isogeometric concepts, and tests them on several examples, including a severely non-linear problem in viscous flow. The book makes a significant contribution towards a seamless integration of CAD and simulation, which eliminates the need for tedious mesh generation and provides high-quality results with minimum user intervention and computing.
Download or read book Boundary Element Analysis of Viscous Flow written by Koichi Kitagawa and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the performance of digital computers has been improved by the rapid development of electronics at remarkable speed. In addition, substantial research has been carried out in developing numerical analysis techniques. Nowadays, a variety of problems in the engineering and scientific fields can be solved by using not only super computers but also personal computers. After the first book titled "Boundary Element" was published by Brebbia in 1978, the boundary element method (BEM) has been recognized as a powerful numerical technique which has some advantages over the finite difference method (FDM) and finite element method (FEM). A great amount of research has been carried out on the applications of BEM to various problems. The numerical analysis of fluid mechanics and heat transfer problems plays a key role in analysing some phenomena and it has become recognized as a new research field called "Computational Fluid Dynamics". In partic ular, the analysis of viscous flow including thermal convection phenomena is one of the most important problems in engineering fields. The FDM and FEM have been generally .applied to solve these problems because of non singularities of governing equations.
Download or read book The Boundary Element Method Volume 1 written by L. C. Wrobel and published by John Wiley & Sons. This book was released on 2002-04-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical techniquewhich has enjoyed increasing popularity over the last two decades,and is now an established alternative to traditional computationalmethods of engineering analysis. The main advantage of the BEM isits unique ability to provide a complete solution in terms ofboundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with acomprehensive and up-to-date account of the boundary element methodand its application to solving engineering problems. Each volume isa self-contained book including a substantial amount of materialnot previously covered by other text books on the subject. Volume 1covers applications to heat transfer, acoustics, electrochemistryand fluid mechanics problems, while volume 2 concentrates on solidsand structures, describing applications to elasticity, plasticity,elastodynamics, fracture mechanics and contact analysis. The earlychapters are designed as a teaching text for final yearundergraduate courses. Both volumes reflect the experience of theauthors over a period of more than twenty years of boundary element research. This volume, Applications in Thermo-Fluids and Acoustics, provides acomprehensive presentation of the BEM from fundamentals to advancedengineering applications and encompasses: Steady and transient heat transfer Potential and viscous fluid flows Frequency and time-domain acoustics Corrosion and other electrochemical problems. A unique feature of this book is an in-depth presentation of BEMformulations in all the above fields, including detaileddiscussions of the basic theory, numerical algorithms and practicalengineering applications of the method. Written by an internationally recognised authority in the field,this is essential reading for postgraduates, researchers andpractitioners in civil, mechanical and chemical engineering andapplied mathematics.
Download or read book Boundary Element Techniques written by C. A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: VI SOCRATES: I think that we ought to stress that we will write only about things that we have first hand experience in, in a coherent way that will be useful to engineers and other scientists and stressing the formulation without being too mathematical. We should write with integrity and honesty, giving reference to other authors where reference is due, but avoiding mentioning everybody just to be certain that our book is widely advertised. Above all, the book should be clear and useful. PLATO: I think we should include a good discussion of fundamental ideas, of how integral equations are formed, pointing out that they are like two dimensional shadows of three dimensional objects, ... SOCRATES: Stop there! Remember you are not 'the' Plato! PLATO: Sorry, I was carried away. ARISTOTLE: I think that the book should have many applications so that the reader can learn by looking at them how to use the method. SOCRATES: I agree. But we should be careful. It is easy to include many illustra tions and examples in a book in order to disguise its meagre contents. All examples should be relevant. ARISTOTLE: And we should also include a full computer program to give the reader if so he wishes, a working experience of the technique.
Download or read book Boundary Integral and Singularity Methods for Linearized Viscous Flow written by C. Pozrikidis and published by Cambridge University Press. This book was released on 1992-02-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to theory, this study focuses on practical application and computer implementation in a coherent introduction to boundary integrals, boundary element and singularity methods for steady and unsteady flow at zero Reynolds numbers.
Download or read book Boundary Element Methods in Engineering written by Balkrishna S. Annigeri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Method (BEM) has become established as an effective tool for the solutions of problems in engineering science. The salient features of the BEM have been well documented in the open literature and therefore will not be elaborated here. The BEM research has progressed rapidly, especially in the past decade and continues to evolve worldwide. This Symposium was organized to provide an international forum for presentation of current research in BEM for linear and nonlinear problems in solid and fluid mechanics and related areas. To this end, papers on the following topics were included: rotary wing aerodynamics, unsteady aerodynamics, design and optimization, elasticity, elasto dynamics and elastoplasticity, fracture mechanics, acoustics, diffusion and wave motion, thermal analysis, mathematical aspects and boundary/finite element coupled methods. A special session was devoted to parallel/vector supercomputing with emphasis on mas sive parallelism. This Symposium was sponsored by United Technologies Research Center (UTRC) , NASA Langley Research Center, and the International Association of Boundary Ele ment Methods (lAB EM) . We thank the UTRC management for their permission to host this Symposium. In particular, we thank Dr. Arthur S. Kesten and Mr. Robert E. Olson for their encouragement and support. We gratefully acknowledge the support of Dr. E. Carson Yates, Jr. of NASA Langley, Prof. Luigi Morino, Dr. Thomas A.
Download or read book Viscous Flow Applications written by Carlos A. Brebbia and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Method has now become a powerful tool of engineering analysis and is routinely applied for the solution of elastostatics and potential problems. More recently research has concentrated on solving a large variety of non-linear and time dependent applications and in particular the method has been developed for viscous fluid flow problems. This book presents the state of the art on the solution of viscous flow using boundary elements and discusses different current approaches which have been validated by numerical experiments. . Chapter 1 of the book presents a brief review of previous work on viscous flow simulation and in particular gives an up-to-date list of the most important BEM references in the field. Chapter 2 reviews the governing equations for general viscous flow, including compressibility. The authors present a compre hensive treatment of the different cases and their formulation in terms of boundary integral equations. This work has been the result of collaboration between Computational Mechanics Institute of Southampton and Massa chusetts Institute of Technology researchers. Chapter 3 describes the gen eralized formulation for unsteady viscous flow problems developed over many years at Georgia Institute of Technology. This formulation has been extensively applied to solve aer09ynamic problems.
Download or read book The Boundary Element Method for Groundwater Flow written by Erwin K. Bruch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the application of the boundary element method to the solution of the Laplace equation is examined. This equation is of fundamental importance in engineering and science as it describes different types of phenomena, inclu- ding the groundwater flow applications highlighted in this book. Special subjects such as numerical integration, subdi- visionof the domain into regions and other computational aspects are discussed in detail in the first chapters. To demonstrate the accuracy and efficiency of the boundary ele- ment method, results obtained when solving the Laplace equa- tion have been compared against known analytical solutions. Other chapters deal with problems such as steady and unstea- dy flow in addition to infiltration problems. The applica- tions demonstrate that the boundary element method provides a powerful solution technique which can be effectively ap- plied to solve this type of problem.
Download or read book Boundary Element Methods in Applied Mechanics written by Masataka Tanaka and published by Elsevier. This book was released on 2017-05-22 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings features a broad range of computational mechanics papers on both solid and fluid mechanics as well as electromagnetics, acoustics, heat transfer and other interdisciplinary problems. Topics covered include theoretical developments, numerical analysis, intelligent and adaptive solution strategies and practical applications.
Download or read book The Boundary Element Method Volume 2 written by M. H. Aliabadi and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical technique, which has enjoyed increasing popularity over the last two decades, and is now an established alternative to traditional computational methods of engineering analysis. The main advantage of the BEM is its unique ability to provide a complete solution in terms of boundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with a comprehensive and up-to-date account of the boundary element method and its application to solving engineering problems. Each volume is a self-contained book including a substantial amount of material not previously covered by other text books on the subject. Volume 1 covers applications to heat transfer, acoustics, electrochemistry and fluid mechanics problems, while volume 2 concentrates on solids and structures, describing applications to elasticity, plasticity, elastodynamics, fracture mechanics and contact analysis. The early chapters are designed as a teaching text for final year undergraduate courses. Both volumes reflect the experience of the authors over a period of more than twenty years of boundary element research. This volume, Applications in Solids and Structures, provides a comprehensive presentation of the BEM from fundamentals to advanced engineering applications and encompasses: Elasticity for 2D, 3D and Plates and Shells Non-linear, Transient and Thermal Stress Analysis Crack Growth and Multi-body Contact Mechanics Sensitivity Analysis and Optimisation Analysis of Assembled Structures. An important feature of this book is the in-depth presentation of BEM formulations in all the above fields, including detailed discussions of the basic theory, numerical algorithms and where possible simple examples are included, as well as test results for practical engineering applications of the method. Although most of the methods presented are the latest developments in the field, the author has included some simple techniques, which are helpful in understanding the computer implementation of BEM. Another notable feature is the comprehensive presentation of a new generation of boundary elements known as the Dual Boundary Element Method. Written by an internationally recognised authority in the field, this is essential reading for postgraduates, researchers and practitioners in Aerospace, Mechanical and Civil Engineering and Applied Mathematics.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Mechanics 88 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1775 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Conference was to become a forum for discussion of both academic and industrial research in those areas of computational engineering science and mechanics which involve and enrich the rational application of computers, numerical methods, and mechanics, in modern technology. The papers presented at this Conference cover the following topics: Solid and Structural Mechanics, Constitutive Modelling, Inelastic and Finite Deformation Response, Transient Analysis, Structural Control and Optimization, Fracture Mechanics and Structural Integrity, Computational Fluid Dynamics, Compressible and Incompressible Flow, Aerodynamics, Transport Phenomena, Heat Transfer and Solidification, Electromagnetic Field, Related Soil Mechanics and MHD, Modern Variational Methods, Biomechanics, and Off-Shore-Structural Mechanics.
Download or read book Boundary Element Methods in Heat Transfer written by Wrobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer problems in industry are usually of a very complex nature, simultaneously involving different transfer modes such as conduction, convection, radiation and others. Because of this, very few problems can be solved analytically and one generally has to resort to numerical analysis. The boundary element method is a numerical technique which has been receiving growing attention for solving heat transfer problems because of its unique ability to confine the discretization process to the boundaries of the problem region. This allows major reductions in the data preparation and computer effort necessary to solve complex industrial problems. The purpose of this book is to present efficient algorithms used in conjunction with the boundary element method for the solution of steady and transient, linear and non-linear heat transfer problems. It represents the state-of-the-art of boundary element applications in the field of heat transfer, and constitutes essential reading for researchers and practising engineers involved with this important topic.
Download or read book Boundary Elements and Other Mesh Reduction Methods XXXVI written by X. W. Gao and published by WIT Press. This book was released on 2013-12-11 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference on Boundary Elements and Mesh Reduction Methods (BEM/MRM) is recognised as the international forum for the latest advances in these techniques and their applications in science and engineering. Launched in 1978 the Conference continues to attract original contributions and has become the forum for their rapid dissemination throughout the international scientific community. Practically all new boundary element ideas have first appeared in the proceedings of these meetings.
Download or read book Advances in Fluid Mechanics XII written by S. Hernández and published by WIT Press. This book was released on 2018-10-30 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers from the 12th International Conference on Advances in Fluid Mechanics, this book covers a wide range of topics including basic formulations and their computer modelling as well as the relationship between experimental and analytical results. The emphasis is on new applications and research currently in progress. The field of fluid mechanics is vast and has numerous and diverse applications. The contained research works discuss new studies in fluid mechanics and present the latest applications in the field. A wide range of topics are covered including, Computational methods; Boundary elements and other mesh reduction methods; Fluid structure interaction; Cooling of electronic devices; Environmental fluid dynamics; Industrial applications; Energy systems; Nano and micro fluids; Turbulent and complex flows; Jets; Droplet and spray dynamics; Bubble dynamics; Multiphase fluid flow; Pumping and fluid transportation; Experimental measurements; Rheology; Chemical reaction flow; Hydroelectromagnetic flow; High speed flow; Wave theory; Energy conversion systems.
Download or read book Boundary Element Methods written by Q. Du and published by Elsevier. This book was released on 2014-05-23 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant developments in the boundary element method during the last two decades have made it a powerful alternative to the domain-type numerical methods of solution such as the finite element method. The advances made in the BEM are more or less due to the innovation of efficient computational techniques by introducing boundary elements for discretization of the boundary integral equations resulting from the so-called direct formulation. BEM has therefore become an efficient tool for optimal design and other inverse problems. These proceedings include discussion of the applications of BEM in mechanical engineering and the principles that have developed to make it an increasingly useful method of problem solving.
Download or read book Boundary Elements VIII written by Masataka Tanaka and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Boundary Element Methods in Engineering was started in 1978 with the following objectives: i) To act as a focus for BE research at a time when the technique wasjust emerging as a powerful tool for engineering analysis. ii) To attract new as weIl as established researchers on Boundary Elements, in order to maintain its vitality and originality. iii) To try to relate the Boundary Element Method to other engineering techniques in an effort to help unify the field of engineering analysis, rather than to contribute to its fragmentation. These objectives were achieved during the last 7 conferences and this meeting - the eighth - has continued to be as innovative and dynamic as any ofthe previous conferences. Another important aim ofthe conference is to encourage the participation of researchers from as many different countries as possible and in this regard it is a policy of the organizers to hold the conference in different locations. It is easy to forget when working on scientific projects that in science as weIl as in other subjects, human relationships are as important as mathematical equations. Science progresses not only as a resuIt oflaboratory and computer experiments or abstract thinking but also by a process of personal interaction.
