Download or read book Multi Level Capacitated Lotsizing with Setup Carryover written by Lisbeth Buschkühl and published by Springer. This book was released on 2019-02-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lotsizing problems are found in every company, which produces various items on resources with scarce capacities. In general, the objective is to find production plans, which meet demand with the resources` given capacities and at minimal costs. However, there is a great variety of company-specific lotsizing problems due to the complexity of the underlying production processes. Both standard MRP-systems and modern Advanced Planning Systems fail to provide adequate solutions. Instead, they most often compute production plans, which are not feasible in practice. In this book new lotsizing models are presented for multi-stage production systems with general product structures, dynamic demand, setup times and lead times. They are extended to cover production on parallel machines. An iterative solution procedure is presented, which generates feasible production plans within seconds of computation time. Potential readership includes scholars of supply chain management and production planning, interested students in these areas as well as practitioners involved in production planning.

Download or read book Dynamic lot sizing problems with stochastic production output written by Michael Kirste and published by BoD – Books on Demand. This book was released on 2017-06-23 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the real world, production systems are affected by external and internal uncertainties. Stochastic demand - an external uncertainty - arises mainly due to forecast errors and unknown behavior of customers in future. Internal uncertainties occur in situations where random yield, random production capacity, or stochastic processing times affect the productivity of a manufacturing system. The resulting stochastic production output is especially present in industries with modern and complex technologies as the semiconductor industry. This thesis provides model formulations and solution methods for capacitated dynamic lot sizing problems with stochastic demand and stochastic production output that can be used by practitioners within Manufacturing Resource Planning Systems (MRP), Capacitated Production Planning Systems (CPPS), and Advanced Planning Systems (APS). In all models, backordered demand is controlled with service levels. Numerical studies compare the solution methods and give managerial implications in presence of stochastic production output. This book addresses practitioners, consultants, and developers as well as students, lecturers, and researchers with focus on lot sizing, production planning, and supply chain management.

Download or read book Logistik Management written by Stefan Voß and published by Springer Science & Business Media. This book was released on 2009-08-21 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Globalisierung und Virtualisierung von Geschäftsbeziehungen vergrößert die Bedeutung und die Komplexität logistischer Herausforderungen. Das Management logistischer Netzwerke wird zu einem wesentlichen Wettbewerbsfaktor für Unternehmen. Das Buch wie die gleichnamige Tagung (September 2009) haben zum Ziel, den internationalen Gedankenaustausch und die Diskussion zwischen Wissenschaft und Praxis gezielt zu fördern, damit Strategien, Methoden und Werkzeuge entwickelt werden können, die es ermöglichen, den wachsenden Anforderungen gerecht zu werden.

Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.

Download or read book Recent Developments and New Directions in Soft Computing written by Lotfi A. Zadeh and published by Springer. This book was released on 2014-06-17 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances and challenges of soft computing. It gathers original scientific contributions written by top scientists in the field and covering theories, methods and applications in a number of research areas related to soft-computing, such as decision-making, probabilistic reasoning, image processing, control, neural networks and data analysis.

Download or read book Advances in Applied Mechanical Engineering written by Hari Kumar Voruganti and published by Springer Nature. This book was released on 2020-02-01 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.

Download or read book Deterministic Lotsizing Models for Production Planning written by Marc Salomon and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with timing and sizing decisions for production lots, and more precisely, with mathematical models to support optimal tim ing and sizing decisions. These models are called lotsizing models. They are characterized by the fact that production lots are determined based on a trade-offbetween production costs and customer service. Production costs can be categorized as basic production costs, which consist of material costs, labour costs, machine startup costs and over head costs, and inventory related costs, which include costs of capital tied up in inventory, insurances and taxes. Customer service is the capability of the firm to deliver to their clients the products in the quantity they ordered at the agreed upon time and place. The costs of realizing a certain service level are usuaIly very dif ficult to convert into money. They include costs of expediting, loss of customer goodwill, and loss of sales revenues resulting from the short age situation.

Download or read book Advances in Production Management Systems Value Networks Innovation Technologies and Management written by Jan Frick and published by Springer. This book was released on 2012-09-26 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2011, held in Stavanger, Norway, in September 2011. The 66 revised and extended full papers were carefully reviewed and selected from 124 papers presented at the conference. The papers are organized in 3 parts: production process, supply chain management, and strategy. They represent the breadth and complexity of topics in operations management, ranging from optimization and use of technology, management of organizations and networks, to sustainable production and globalization. The authors use a broad range of methodological approaches spanning from grounded theory and qualitative methods, via a broad set of statistical methods to modeling and simulation techniques.

Download or read book Agent Based Manufacturing and Control Systems written by Massimo Paolucci and published by CRC Press. This book was released on 2004-10-28 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional manufacturing systems rely upon centralized, hierarchical systems that are not responsive enough to the increasing demand for mass customization. Decentralized, or heterarchical, management systems using autonomous agents promise to nullify the limitations of previous solutions. Agent-Based Manufacturing and Control Systems: New

Download or read book Essays and Surveys in Metaheuristics written by Celso C. Ribeiro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding exact solutions to many combinatorial optimization problems in busi ness, engineering, and science still poses a real challenge, despite the impact of recent advances in mathematical programming and computer technology. New fields of applications, such as computational biology, electronic commerce, and supply chain management, bring new challenges and needs for algorithms and optimization techniques. Metaheuristics are master procedures that guide and modify the operations of subordinate heuristics, to produce improved approx imate solutions to hard optimization problems with respect to more simple algorithms. They also provide fast and robust tools, producing high-quality solutions in reasonable computation times. The field of metaheuristics has been fast evolving in recent years. Tech niques such as simulated annealing, tabu search, genetic algorithms, scatter search, greedy randomized adaptive search, variable neighborhood search, ant systems, and their hybrids are currently among the most efficient and robust optimization strategies to find high-quality solutions to many real-life optimiza tion problems. A very large nmnber of successful applications of metaheuristics are reported in the literature and spread throughout many books, journals, and conference proceedings. A series of international conferences entirely devoted to the theory, applications, and computational developments in metaheuristics has been attracting an increasing number of participants, from universities and the industry.

Download or read book Closing the Gap Between Practice and Research in Industrial Engineering written by Elisabeth Viles and published by Springer. This book was released on 2017-08-17 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the XXII International Conference on Industrial Engineering and Operations Management, International IIE Conference 2016, and International AIM Conference 2016. This joint conference is a result of an agreement between ADINGOR (Asociación para el Desarrollo de la Ingeniería de Organización), ABEPRO (Associação Brasileira de Engenharia de Produção), AIM (European Academy for Industrial Management) and the IIE (Institute of Industrial Engineers), and took place at TECNUN-School of Engineering (San Sebastián, Spain) from July 13th to 15th, 2016. The book includes the latest research advances and cutting-edge analyses of real case studies in Industrial Engineering and Operations Management from diverse international contexts, while also identifying concrete business applications for the latest findings and innovations in operations management and the decisions sciences.

Download or read book Reverse Logistics written by Rommert Dekker and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.

Download or read book Naval Research Logistics written by and published by . This book was released on 2005 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lotsizing and Scheduling for Production Planning written by Knut Haase and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Billions of dollars are tied up in the inventories of manufacturing companies which cause large (interest) costs. A small decrease of the inventory and/or production costs without reduction of the service level can increase the profit substantially. Especially in the case of scarce capacity, efficient production schedules are fundamental for short delivery time and on-time delivery which are important competitive priorities. To support decision makers by improving their manufacturing resource planning system with appropriate methods is one of the most of production planning. interesting challenges The following chapters contain new models and new solution strategies which may be helpful for decision makers and for further research in the areas of production planning and operations research. The main subject is on lotsizing and scheduling. The objectives and further characteristics of such problems can be inferred from practical need. Thus, before an outline is given, we consider the general objectives of lotsizing and scheduling and classify the most important characteristics of such problems in the following sections.

Download or read book Information Control Problems in Manufacturing 2006 written by Alexandre Dolgui and published by Elsevier. This book was released on 2007-04-18 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing

Download or read book Time Continuity in Discrete Time Models written by Christopher Suerie and published by Springer Science & Business Media. This book was released on 2006-01-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production planning problems containing special characteristics from process industries are addressed in this book. The main subject is the development of mathematical programming models that allow to model production plans which are not disrupted by discretization of time. However, discrete time models are used as a basis and are subsequently enhanced to include aspects of time continuity. Their integration is achieved by different building blocks which may be combined freely according to the specific planning situation at hand. The primary area of application of these kinds of models are process industries.

Download or read book Logistics Management written by Dirk Mattfeld and published by Springer. This book was released on 2015-08-10 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the selected and thoroughly reviewed research papers presented at the conference on logistics management LM2015 in Braunschweig, Germany. The conference of the special interest group in logistics of the German Academic Association for Business Research (VHB) was held in conjunction with the special interest group on production of the VHB. Thus, the papers reflect the current state-of-the-art in logistics and supply chain management while focusing especially on aspects of production logistics, i.e., facility layout, inventory management, line configuration, or flexible production.