Download or read book Solids Sampling Using Double pulse Laser Ablation Inductivelycoupled Plasma Mass Spectrometry written by Xianglei Mao and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the use of double-pulse laser ablation to improve ICP-MS internal precision (temporal relative standard deviation, %TRSD). Double pulse laser ablation offers reduced fractionation, increased sensitivity, and improved signal to noise ratios. The first pulse is used to ablate a large quantity of mass from the sample surface. The second pulse is applied with a variable time delay after the first pulse to break the ablated mass into a finer aerosol, which is more readily transported to and digested in the ICP-MS.
Download or read book Analysis of Solids by Laser Ablation Inductively Coupled Plasma Mass Spectrometry written by David Brian Aeschliman and published by . This book was released on 2003 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation manuscript concentrates on methods to improve the utility of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) as a rapid and accurate technique for quantitative analysis, forensic matching, and source attribution of solid samples. A solution calibration method for LA-ICP-MS is described that does not require matrix-matched solid standards or prior knowledge of sample composition. Desolvated particles from a microconcentric nebulizer and particles ablated from a localized position on a solid sample are mixed and introduced simultaneously to the ICP-MS. The transport of sample particulates from the ablation cell is measured online with piezoelectric microbalance to provide signal normalization. The relative accuracy of the quantitative analysis of NIST 612 glass and NIST 1264a steel is 3% and 12%, respectively, except for the elements Pb and Bi in steel. LA-ICP-MS is also used with principal components analysis (PCA) to simplify routine comparisons of forensic materials without time-consuming and destructive sample dissolution. The relative concentrations of trace elements in a solid sample are examined to provide a "fingerprint" composition that can be used for definitive identification and source matching of the material. Residue samples are matched to bulk materials using PCA. Variation of laser focus and PCA are also used to diagnose the presence and severity of elemental fractionation, which remains the most significant limitation for accurate quantitative analyses by LA-ICP-MS. High-speed photographs and video of an ICP are used to examine the validity of solution calibration for LA-ICP-MS and to study the trajectories, lifetimes, and emission behavior of particles traversing the plasma under a variety of conditions. No red emission clouds from YO are visible in the ICP when a 20-[mu]L min−1 nebulizer is used to spray a 2000 ppm aqueous yttrium solution, suggesting that the wet droplets from this nebulizer desolvate almost completely before entering the ICP. These desolvated particles appear to atomize and ionize like the small dry particulates from laser ablation. However, some large ablated particulates are observed to fly through the plasma intact, possibly contributing to elemental fractionation. Nevertheless, accurate calibration results using solution standards can be obtained for elements not affected by fractionation.
Download or read book Direct Multielemental Analysis of Solid Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry and Pulsed Radio Frequency Glow Discharge Mass Spectrometry written by Joseph C. Miller and published by . This book was released on 2003 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calibration of Laser Ablation Inductively Coupled Plasma Mass Spectrometry Using Dried Solution Aerosols for the Quantitative Analysis of Solids written by James Joseph Leach and published by . This book was released on 1998 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis concerns itself with the use of inductively coupled plasma mass spectrometry (ICP-MS) for the analysis of solid samples. The instrumentation and attributes of ICP-MS are presented. The theoretical and practical considerations of laser ablation as a solid sampling source are reviewed. The feasibility of quantitative analysis of solids by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is assessed. A formula is presented which illustrates that solution standards can be used for the calibration of solids.
Download or read book Representative Sampling Using Single pulse Laser Ablation Withinductively Coupled Plasma Mass Spectroscopy written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Single pulse laser ablation sampling with inductively coupled plasma mass spectrometry (ICP-MS) was assessed for accurate chemical analysis. Elemental fractionation (e.g. Pb/U), the quantity of ablated mass (crater volume), ICP-MS intensity and the particle contribution (spike signal) during single pulse ablation of NIST 610 glass were investigated. Pb/U fractionation significantly changed between the first and second laser pulse and showed strong irradiance dependence. The Pb/U ratio obtained by the first pulse was usually higher than that of the second pulse, with the average value close to the representative level. Segregation during laser ablation is proposed to explain the composition change between the first and second pulse. Crater volume measurements showed that the second pulse produced significantly more ablated mass. A roll-off of the crater depth occurred at (almost equal to)750 GW/cm2. The absolute ICP-MS intensity from the second pulse showed no correlation with crater depth. Particle induced spikes on the transit signal showed irradiance and elemental species dependence.
Download or read book Applications of Laser Ablation Inductively Coupled Plasma Mass Spectrometry for the Analysis of Solids written by Melody Bi and published by . This book was released on 2000 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The application to laser ablation for solid sample introduction to inductively coupled plasma source mass spectrometry written by Steven F. Durrant and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calibration of Laser Ablation Inductively Coupled Plasma Mass Spectrometry Using Dried Solution Aerosols for the Quantitative Analysis of Solid Samples written by and published by . This book was released on 1999 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inductively coupled plasma mass spectrometry (ICP-MS) has become the method of choice for elemental and isotopic analysis. Several factors contribute to its success. Modern instruments are capable of routine analysis at part per trillion levels with relative detection limits in part per quadrillion levels. Sensitivities in these instruments can be as high as 200 million counts per second per part per million with linear dynamic ranges up to eight orders of magnitude. With standards for only a few elements, rapid semiquantitative analysis of over 70 elements in an individual sample can be performed. Less than 20 years after its inception ICP-MS has shown to be applicable to several areas of science. These include geochemistry, the nuclear industry, environmental chemistry, clinical chemistry, the semiconductor industry, and forensic chemistry. In this introduction, the general attributes of ICP-MS will be discussed in terms of instrumentation and sample introduction. The advantages and disadvantages of current systems are presented. A detailed description of one method of sample introduction, laser ablation, is given. The paper also gives conclusions and suggestions for future work. Chapter 2, Quantitative analysis of solids by laser ablation inductively coupled plasma mass spectrometry using dried solution aerosols for calibration, has been removed for separate processing.
Download or read book The Application of Laser Ablation for Solid Sample Introduction to Inductively Coupled Plasma source Mass Spectroscopy written by Stephen F. Durrant and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Ablation of Solids written by Mihai Stafe and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces ‘the state of the art' of pulsed laser ablation and its applications. It is based on recent theoretical and experimental studies. The book reaches from the basics to advanced topics of pulsed laser ablation. Theoretical and experimental fundamental phenomena involved in pulsed laser ablation are discussed with respect to material properties, laser wavelength, fluence and intensity regime of the light absorbed linearly or non-linearly in the target material. The energy absorbed by the electrons leads to atom/molecule excitation, ionization and/or direct chemical bond breaking and is also transferred to the lattice leading to material heating and phase transitions. Experimental non-invasive optical methods for analyzing these phenomena in real time are described. Theoretical models for pulsed laser ablation and phase transitions induced by laser beams and laser-vapour/plasma interaction during the plume expansion above the target are also presented. Calculations of the ablation speed and dimensions of the ablated micro- and nano-structures are performed. The validity and required refinement of different models in different experimental conditions is provided. The pulsed laser deposition process which bases on collecting the ablated particles on a surface is analyzed in terms of efficiency and quality of the deposited films as a function of ambient conditions, target material, laser parameters and substrate characteristics. The interaction between the incident laser and the ablation plasma is analyzed with respect to its influence on the structures of the deposited films and its capacity to generate high harmonics and single attosecond pulses which are highly desirable in pump-probe experiments.
Download or read book Inductively Coupled Plasma Spectrometry and its Applications written by Steve J. Hill and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Inductively Coupled Plasma Spectrometry andits Applications was written as a handbook for users who wanted abetter understanding of the theory augmented by a practical insightof how best to approach a range of applications, and to provide auseful starting point for users trying an approach or technique newto them. These objectives have been retained in the second editionbut a slight shift in emphasis gives the volume an overallperspective that is more forward looking. Structured into 11 chapters, the current edition is a thoroughrevision of the original, covering the principles of inductivelycoupled plasmas, instrumentation, methodology and applicationswithin environmental analysis, earth science, food science andclinical medicine. Each chapter, written by internationallyrecognised leaders in their specific subject areas, provides enoughdetail to be useful to both the new and experienced users. Fullaccount is taken of recent developments, such as high resolutioninstruments, novel detection systems and electrospraytechniques. Written for all analytical scientists but particularly thoseinvolved in atomic spectroscopy and in environmental, geochemical,clinical or food analysis, this timely and informative book will bean essential reference in their use of inductively coupled plasmasto achieve their own scientific goals.
Download or read book Practical Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2021-07-14 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which an intense laser beam irradiates the surface of a solid to induce instant local removal of atoms by a thermal or non-thermal mechanism. Through eight chapters of original research studies and literature reviews written by experts from the international scientific community, this book presents theoretical and experimental aspects of the laser ablation phenomenon for processing material including pulsed laser deposition of thin films, laser surface modification, laser machining and laser nanoparticle formation. It also includes a study of the dynamics of plasmas generated by laser ablation of multi-component materials and an overview of laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) techniques for chemical analysis.
Download or read book Inductively Coupled Plasma Mass Spectrometry with a Twin Quadrupole Instrument Using Laser Ablation Sample Introduction and Monodisperse Dried Microparticulate Injection written by and published by . This book was released on 1997 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this dissertation is the use of a twin quadrupole inductively coupled plasma mass spectrometer (ICP-MS) for the simultaneous detection of two m/z values. The twin quadrupole ICP-MS is used with laser ablation sample introduction in both the steady state (10 Hz) and single pulse modes. Steady state signals are highly correlated and the majority of flicker noise cancels when the ratio is calculated. Using a copper sample, the isotope ratio 63Cu/65Cu is measured with a relative standard deviation (RSD) of 0.26%. Transient signals for single laser pulses are also obtained. Copper isotope ratio measurements for several laser pulses are measured with an RSD of 0.85%. Laser ablation (LA) is used with steel samples to assess the ability of the twin quadrupole ICP-MS to eliminate flicker noise of minor components of steel samples. Isotopic and internal standard ratios are measured in the first part of this work. The isotope ratio 52Cr+/53Cr+ (Cr present at 1.31 %) can be measured with an RSD of 0.06 % to 0.1 %. For internal standard elements, RSDs improve from 1.9 % in the Cr+ signal to 0.12% for the ratio of 51V+ to 52Cr+. In the second part of this work, one mass spectrometer is scanned while the second channel measures an individual m/z value. When the ratio of these two signals is calculated, the peak shapes in the mass spectrum are improved significantly. Pulses of analyte and matrix ions from individual drops are measured simultaneously using the twin quadrupole ICP-MS with monodisperse dried microparticulate injection (MDMI). At modest Pb concentrations (500 ppm), a shoulder on the leading edge of the Li+ signal becomes apparent. Space charge effects are consistent with the disturbances seen.
Download or read book Applications of Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Monitoring Impurities in Solid Foodstuff written by José Carlos Rodriguez Jule and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Isotopic Analysis written by Frank Vanhaecke and published by John Wiley & Sons. This book was released on 2012-07-10 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by two very well-known and respected scientists in the field, this excellent practical guide is the first to cover the fundamentals and a wide range of applications, as well as showing readers how to efficiently use this increasingly important technique. From the contents: * The Isotopic Composition of the Elements * Single-Collector ICP-MS * Multi-Collector ICP-MS * Advances in Laser Ablation - Multi-Collector ICP-MS * Correction for Instrumental Mass Discrimination in Isotope Ratio Determination with Multi-Collector ICP-MS * Reference Materials in Isotopic Analysis * Quality Control in Isotope Ratio Applications * Determination of Trace Elements and Elemental Species Using Isotope Dilution ICP-MS * Geochronological Dating * Application of Multi-Collector ICP-MS to Isotopic Analysis in Cosmochemistry * Establishing the Basis for Using Stable Isotope Ratios of Metals as Paleoredox Proxies * Isotopes as Tracers of Elements Across the Geosphere-Biosphere Interface * Archaeometric Applications * Forensics Applications * Nuclear Applications * The Use of Stable Isotope Techniques for Studying Mineral and Trace Element Metabolism in Humans * Isotopic Analysis via Multi-Collector ICP-MS in Elemental Speciation A must-have for newcomers as well as established scientists seeking an overview of isotopic analysis via ICP-MS.
Download or read book Analysis of Glass Ceramic and Soil Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry written by Scott A. Baker and published by . This book was released on 1998 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Inductively Coupled Plasma Mass Spectrometry written by K. E. Jarvis and published by Blackie Academic and Professional. This book was released on 1992 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
