Download or read book Smart Structures and Materials written by Aurelio L. Araujo and published by Springer. This book was released on 2016-12-20 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was compiled with expanded and reviewed contributions from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials, that was held from 3 to 6 June 2015 at Ponta Delgada, Azores, Portugal. The Conference provided a comprehensive forum for discussing the current state of the art in the field as well as generating inspiration for future ideas specifically on a multidisciplinary level. The scope of the Conference included topics related to the following areas: Fundamentals of smart materials and structures; Modeling/formulation and characterization of smart actuators, sensors and smart material systems; Trends and developments in diverse areas such as material science including composite materials, intelligent hydrogels, interfacial phenomena, phase boundaries and boundary layers of phase boundaries, control, micro- and nano-systems, electronics, etc. to be considered for smart systems; Comparative evaluation of different smart actuators and sensors; Analysis of structural concepts and designs in terms of their adaptability to smart technologies; Design and development of smart structures and systems; Biomimetic phenomena and their inspiration in engineering; Fabrication and testing of smart structures and systems; Applications of smart materials, structures and related technology; Smart robots; Morphing wings and smart aircrafts; Artificial muscles and biomedical applications; Smart structures in mechatronics; and Energy harvesting.
Download or read book World Forum on Smart Materials and Smart Structures Technology written by B.F. Spencer Jr. and published by CRC Press. This book was released on 2008-06-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in smart materials and structures seeks to apply multifunctional capabilities of new and existing materials to develop structures and systems that are capable of self-sensing and monitoring, self-diagnosis and prognosis with intelligence, self-healing and repair, and adaptive response to prevent loss of human life and catastrophe, to minimize maintenance and life-cycle costs, and to prolong service life. This book provides the critical knowledge and technological bases required for meeting one of the ultimate engineering challenges: the design and construction of smart structures and systems.
Download or read book Smart Structures and Materials written by and published by . This book was released on 2006 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Materials and Structures written by Haim Abramovich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of our 2016 book provides insight into designing intelligent materials and structures for special application in engineering. Literature is updated throughout and a new chapter on optics fibers has been added. The book discusses simulation and experimental determination of physical material properties, such as piezoelectric effects, shape memory, electro-rheology, and distributed control for vibrations minimization.
Download or read book Plates and Shells for Smart Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart structures that contain embedded piezoelectric patches are loaded by both mechanical and electrical fields. Traditional plate and shell theories were developed to analyze structures subject to mechanical loads. However, these often fail when tasked with the evaluation of both electrical and mechanical fields and loads. In recent years more advanced models have been developed that overcome these limitations. Plates and Shells for Smart Structures offers a complete guide and reference to smart structures under both mechanical and electrical loads, starting with the basic principles and working right up to the most advanced models. It provides an overview of classical plate and shell theories for piezoelectric elasticity and demonstrates their limitations in static and dynamic analysis with a number of example problems. This book also provides both analytical and finite element solutions, thus enabling the reader to compare strong and weak solutions to the problems. Key features: compares a large variety of classical and modern approaches to plates and shells, such as Kirchhoff-Love , Reissner-Mindlin assumptions and higher order, layer-wise and mixed theories introduces theories able to consider electromechanical couplings as well as those that provide appropriate interface continuity conditions for both electrical and mechanical variables considers both static and dynamic analysis accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given as well as solve problems of their own The models currently used have a wide range of applications in civil, automotive, marine and aerospace engineering. Researchers of smart structures, and structural analysts in industry, will find all they need to know in this concise reference. Graduate and postgraduate students of mechanical, civil and aerospace engineering can also use this book in their studies. www.mul2.com
Download or read book Structural Health Monitoring 2006 written by Alfredo Güemes and published by DEStech Publications, Inc. This book was released on 2006 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the Third European Workshop on Structural Health Monitoring held at the Conference Centre in Granada, Spain, in July of 2006 includes four keynote presentations and 170 technical papers written by an international group of contributors. Papers discuss technology and activities related to damage detection and evaluation in engin
Download or read book Adaptronics and Smart Structures written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2007-10-10 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptronic structures and systems are engineered to adjust automatically to variable operating and environmental conditions, through the use of feedback control. The authors of this book have taken on the task of comprehensively describing the current state of the art in this highly modern and broadly interdisciplinary field. The book presents selected examples of applications, and goes on to demonstrate current development trends.
Download or read book Urban Habitat Constructions Under Catastrophic Events written by Federico M. Mazzolani and published by CRC Press. This book was released on 2010-08-27 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: COST is an intergovernmental framework for European Cooperation in Science and Technology, allowing the coordination of nationally-funded research on a European level. Part of COST was COST Action C26Urban Habitat Constructions Under Catastrophic Events which started in 2006 and held its final conference in Naples, Italy, on 16-18 September 201
Download or read book Manufacturing System written by Faieza Abdul Aziz and published by BoD – Books on Demand. This book was released on 2012-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to bring together selected recent advances, tools, application and new ideas in manufacturing systems. Manufacturing system comprise of equipment, products, people, information, control and support functions for the competitive development to satisfy market needs. It provides a comprehensive collection of papers on the latest fundamental and applied industrial research. The book will be of great interest to those involved in manufacturing engineering, systems and management and those involved in manufacturing research.
Download or read book Plasticity of Cold Worked Metals written by A. Paglietti and published by WIT Press. This book was released on 2007 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity theory is a tool used in structural analysis to evaluate the ultimate strength and the post-elastic behavior of ductile structures, explains Paglietti (strength of metals and engineering, U. of Cagliari, Italy), but its application to real materials is undermined by the evolution law of the yield surface, also known as the work-hardening
Download or read book Self Sensing Techniques for Piezoelectric Vibration Applications written by Emanuele Grasso and published by Logos Verlag Berlin GmbH. This book was released on 2014-02-27 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self sensing techniques allow using a piezoelectric transducer simultaneously as an actuator and as a sensor, as they reconstruct its mechanical sensory information by measuring its electrical quantities, i.e. voltage and charge. In vibration control applications piezoelectric self sensing actuators are highly desirable as they allow precise collocated control. Past research work was mainly based on the linear behavior of piezoelectric materials, thus restricting the operating driving voltages to low values. This work addresses the problem of using a self sensing piezoelectric actuator at its full driving voltage range. A new self sensing technique is proposed, which is based on the hysteretic modeling and identification of the piezoelectric transducer capacitance. After providing a sound presentation on piezoelectricity and vibrating structures, the most common self sensing techniques are discussed and the new self sensing technique is introduced and compared to typical linear methods both theoretically and experimentally.
Download or read book Structural Health Monitoring 2011 written by Fu-Kuo Chang and published by DEStech Publications, Inc. This book was released on 2011 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set of books, comprising over 2,700 total pages, presents 325 fully original presentations on recent advances in structural health monitoring, as applied to commercial and military aircraft (manned and unmanned), high-rise buildings, wind turbines, civil infrastructure, power plants and ships. One general theme of the books is how SHM can be used for condition-based maintenance, with the goal of developing prediction-based systems, designed to save money over the life of vehicles and structures. A second theme centers on technologies for developing systems comprising sensors, diagnostic data and decision-making, with a focus on intelligent materials able to respond to damage and in some cases repair it. Finally the books discuss the relation among data, data interpretation and decision-making in managing a wide variety of complex structures and vehicles. More recent technologies discussed in the books include SHM and environmental effects, energy harvesting, non-contact sensing, and intelligent networks.Material in these books was first presented in September, 2011 at a conference held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Office, the Office of Naval Research and the National Science Foundation. Some of the highlights of the books include: SHM technologies for condition-based maintenance (CBM) and predictive maintenance Verification, validation, qualification, data mining, prognostics systems for decision-making Structural health, sensing and materials in closed-loop intelligent networks Military and aerospace, bioinspired sensors, wind turbines, monitoring with MEMS, damage sensing, hot spot monitoring, SHM and ships, high-rise structures Includes a fully-searchable CD-ROM displaying many figures and charts in full color
Download or read book Progress in Smart Materials and Structures written by Peter L. Reece and published by Nova Publishers. This book was released on 2007 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Smart" materials respond to environmental stimuli with particular changes in some variables. For that reason they are often also called responsive materials. Depending on changes in some external conditions, "smart" materials change either their properties (mechanical, electrical, appearance), their structure or composition, or their functions. Mostly, "smart" materials are embedded in systems whose inherent properties can be favourably changed to meet performance needs. Smart materials and structures have widespread applications in: 1. Materials science: composites, ceramics, processing science, interface science, sensor/actuator materials, chiral materials, conducting and chiral polymers, electrochromic materials, liquid crystals, molecular-level smart materials, biomaterials. 2. Sensing and actuation: electromagnetic, acoustic, chemical and mechanical sensing and actuation, single-measurand sensors, multiplexed multimeasurand distributed sensors and actuators, sensor/actuator signal processing, compatibility of sensors and actuators with conventional and advanced materials, smart sensors for materials and composites processing. 3. Optics and electromagnetics: optical fibre technology, active and adaptive optical systems and components, tuneable high-dielectric phase shifters, tuneable surface control. 4. Structures: smart skins for drag and turbulence control, other applications in aerospace/hydrospace structures, civil infrastructures, transportation vehicles, manufacturing equipment, repairability and maintainability. 5. Control: structural acoustic control, distributed control, analogue and digital feedback control, real-time implementation, adaptive structure stability, damage implications for structural control. 6. Information processing: neural networks, data processing, data visualisation and reliability. This book presents leading research from around the globe in this field.
Download or read book Advances in Heterogeneous Material Mechanics 2008 written by Jinghong Fan and published by DEStech Publications, Inc. This book was released on 2008 with total page 1757 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The International Conference on Heterogeneous Material Mechanics (ICHMM) in Huangshan, China, June 3-8, 2008 follows the successful inaugural ICHMM held in ChongQing, China in June, 2004. The ICHMM series is the first international forum that focuses exclusively on various issues related to the behavior of heterogeneous materials in a broad sense. The object of the ICHMM is to present and publicize integrated scientific and engineering approaches to the measurement and modeling of phenomena at the interface of materials science, physics, chemistry, biology, and solid mechanics."--Preface, p. xxxix.
Download or read book American Book Publishing Record written by and published by . This book was released on 2007 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dielectric Elastomers as Electromechanical Transducers written by Federico Carpi and published by Elsevier. This book was released on 2011-09-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Elastomers as Electromechanical Transducers provides a comprehensive and updated insight into dielectric elastomers; one of the most promising classes of polymer-based smart materials and technologies. This technology can be used in a very broad range of applications, from robotics and automation to the biomedical field. The need for improved transducer performance has resulted in considerable efforts towards the development of devices relying on materials with intrinsic transduction properties. These materials, often termed as "smart or "intelligent, include improved piezoelectrics and magnetostrictive or shape-memory materials. Emerging electromechanical transduction technologies, based on so-called ElectroActive Polymers (EAP), have gained considerable attention. EAP offer the potential for performance exceeding other smart materials, while retaining the cost and versatility inherent to polymer materials. Within the EAP family, "dielectric elastomers, are of particular interest as they show good overall performance, simplicity of structure and robustness. Dielectric elastomer transducers are rapidly emerging as high-performance "pseudo-muscular actuators, useful for different kinds of tasks. Further, in addition to actuation, dielectric elastomers have also been shown to offer unique possibilities for improved generator and sensing devices. Dielectric elastomer transduction is enabling an enormous range of new applications that were precluded to any other EAP or smart-material technology until recently. This book provides a comprehensive and updated insight into dielectric elastomer transduction, covering all its fundamental aspects. The book deals with transduction principles, basic materials properties, design of efficient device architectures, material and device modelling, along with applications. - Concise and comprehensive treatment for practitioners and academics - Guides the reader through the latest developments in electroactive-polymer-based technology - Designed for ease of use with sections on fundamentals, materials, devices, models and applications
Download or read book Smart Structures written by A. V. Srinivasan and published by Cambridge University Press. This book was released on 2001 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory text on the analysis and design of smart devices and structures.
