Download or read book Smart Hydrogel Modelling written by Hua Li and published by Springer Science & Business Media. This book was released on 2010-01-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of mathematical modelling and numerical simulation is generally accepted as the third mode of scienti?c discovery (with the other two modes being experiment and analysis), making this ?eld an integral component of c- ting edge scienti?c and industrial research in most domains. This is especially so in advanced biomaterials such as polymeric hydrogels responsive to biostimuli for a wide range of potential BioMEMS applications, where multiphysics and mul- phase are common requirements. These environmental stimuli-responsive hydrogels are often known as smart hydrogels. In the published studies on the smart or stimu- responsive hydrogels, the literature search clearly indicates that the vast majority are experimental based. In particular, although there are a few published books on the smart hydrogels, none is involved in the modelling of smart hydrogels. For the few published journal papers that conducted mathematical modelling and numerical simulation, results were far from satisfactory, and showed signi?cant d- crepancies when compared with existing experimental data. This has resulted in ad hoc studies of these hydrogel materials mainly conducted by trial and error. This is a very time-consuming and inef?cient process, and certain aspects of fun- mental knowledge are often missed or overlooked, resulting in off-tangent research directions.
Download or read book Intelligent Hydrogels written by Gabriele Sadowski and published by Springer. This book was released on 2014-01-28 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Progress in Colloid and Polymer Science assembles original contributions and invited reviews from the priority research program "Intelligent Hydrogels", funded by the German Science Foundation DFG since 2006, with about 25 contributing research groups. In the center of interest of this program and the present book are responsive hydrogels, i.e. hydrophilic polymer or polyelectrolyte networks that are able to respond to environmental stimuli such as changes in temperature, pH, additive concentration or electrical field. The activities focus on different aspects: on hydrogel synthesis, on the modeling and simulation of thermophysical hydrogel properties, as well as on innovative new hydrogel applications as smart materials. The present book summarizes the highlights in the results of the priority program in original contributions and invited reviews.
Download or read book Analysis and Modelling of Advanced Structures and Smart Systems written by Holm Altenbach and published by Springer. This book was released on 2017-11-27 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented at the 8th International Conference "Design, Modeling and Experiments of Advanced Structures and Systems" (DeMEASS VIII, held in Moscow, Russia in May 2017) and reflects the modern state of sciences in this field. The contributions contain topics like Piezoelectric, Ferroelectric, Ferroelastic and Magnetostrictive Materials, Shape Memory Alloys and Active Polymers, Functionally Graded Materials, Multi-Functional Smart Materials and Structures, Coupled Multi-Field Problems, Design and Modeling of Sensors and Actuators, Adaptive Structures.
Download or read book Smart Hydrogel Functional Materials written by Liang-Yin Chu and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Hydrogel Functional Materials comprehensively and systematically describes our current understanding of smart or intelligent hydrogel functional materials with environmental stimuli-responsive functions. The contents range from hydrogels (including hydrogel-functionalized membranes) to microgels (including hydrogel-functionalized microcapsules) with various response properties, such as thermo-response, pH-response, pH-/thermo-dual-response, glucose-response, ethanol-response, ion-recognition, molecular-recognition, and so on. Most of the contents in this book represent the fresh achievements of the authors’ group on smart hydrogel functional materials. While all chapters can be read as stand-alone papers, together they clearly describe the design concepts, fabrication strategies and methods, microstructures and performances of smart hydrogel functional materials. Vivid schematics and illustrations throughout the book enhance the accessibility of the theory and technologies involved. This is an ideal reference book for a broad general readership including chemists, materials researchers, chemical engineers, pharmaceutical scientists and biomedical researchers, who are interested in designing and fabricating smart hydrogel functional materials for various application purposes. Dr. Liang-Yin Chu is a professor at the School of Chemical Engineering, Sichuan University, China. He is a Distinguished Young Scholar of the National Natural Science Foundation of China and a Distinguished Professor of the “Chang Jiang Scholars Program” of the Ministry of Education of China.
Download or read book Computational Modeling of Intelligent Soft Matter written by Mostafa Baghani and published by Elsevier. This book was released on 2023-02-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Intelligent Soft Matter: Shape Memory Polymers and Hydrogels covers the multiphysics response of various smart polymer materials, such as temperature-sensitive shape memory polymers and temperature/ chemosensitive hydrogels. Several thermo–chemo-mechanical constitutive models for these smart polymers are outlined, and their real-world applications are highlighted. The numerical counterpart of each introduced constitutive model is also presented, empowering readers to solve practical problems requiring thermomechanical responses of these materials as well as design and analyze real-world structures made of them. Introduces constitutive models based on continuum thermodynamics for intelligent soft materials Presents calibration methods for identifying material model parameters as well as finite element implementation of the featured models Allows readers to solve practical problems requiring thermomechanical responses from these materials as well as the design and analysis of real-world structures made of them
Download or read book The Mechanics of Hydrogels written by Hua Li and published by Woodhead Publishing. This book was released on 2022-08-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Hydrogels: Mechanical Properties, Testing, and Applications offers readers a systematic description of the mechanical properties and characterizations of hydrogels. Practical topics such as manufacturing hydrogels with controlled mechanical properties and the mechanical testing of hydrogels are covered at length, as are areas such as inelastic and nonlinear deformation, rheological characterization, fracture and indentation testing, mechanical properties of cellularly responsive hydrogels, and more. Proper instrumentation and modeling techniques for measuring the mechanical properties of hydrogels are also explored. Links the mechanical and biological behaviors and applications of hydrogels Looks at the manufacturing and mechanical testing of hydrogels Discusses the design and use of hydrogels in a wide array of applications
Download or read book Hydrogel Sensors and Actuators written by Gerald Gerlach and published by Springer Science & Business Media. This book was released on 2009-09-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogels are a fascinating class of polymers which show an immense ability of swelling under the influence of temperature, pH value or concentrations of different species in aqueous solutions. The volume change can amount up to several hundred percent. This unique behaviour is already used in such applications like disposable diapers, contact lenses or drug-delivery systems. The ability to perform mechanical work has been shifted the technical interest more and more towards sensors and actuators exploiting the thermo-chemo-mechano-electrical coupling within hydrogels. The accuracy requirements for such devices are much more demanding than for previous applications. Therefore, a deep knowledge of both the material and the functional properties of hydrogel sensors and actuators is needed. The monograph describes state of the art and recent developments for these materials in sensor and actuator technology.
Download or read book Reduced Modelling of Planar Fuel Cells written by Zhongjie He and published by Springer. This book was released on 2016-12-25 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on novel reduced cell and stack models for proton exchange membrane fuel cells (PEMFCs) and planar solid oxide fuel cells (P-SOFCs) that serve to reduce the computational cost by two orders of magnitude or more with desired numerical accuracy, while capturing both the average properties and the variability of the dependent variables in the 3D counterparts. The information provided can also be applied to other kinds of plate-type fuel cells whose flow fields consist of parallel plain channels separated by solid ribs. These fast and efficient models allow statistical sensitivity analysis for a sample size in the order of 1000 without prohibitive computational cost to be performed to investigate not only the individual, but also the simultaneous effects of a group of varying geometrical, material, and operational parameters. This provides important information for cell/stack design, and to illustrate this, Monte Carlo simulation of the reduced P-SOFC model is conducted at both the single-cell and stack levels.
Download or read book Smart Polymers and Their Applications written by Maria Rosa Aguilar and published by Woodhead Publishing. This book was released on 2019-02-15 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Polymers and Their Applications, Second Edition presents an up-to-date resource of information on the synthesis and properties of different types of smart polymers, including temperature, pH, electro, magnetic and photo-responsive polymers, amongst others. It is an ideal introduction to this field, as well as a review of the latest research in this area. Shape memory polymers, smart polymer hydrogels, and self-healing polymer systems are also explored. In addition, a very strong focus on applications of smart polymers is included for tissue engineering, smart polymer nanocarriers for drug delivery, and the use of smart polymers in medical devices. Additionally, the book covers the use of smart polymers for textile applications, packaging, energy storage, optical data storage, environmental protection, and more. This book is an ideal, technical resource for chemists, chemical engineers, materials scientists, mechanical engineers and other professionals in a range of industries. Includes a significant number of new chapters on smart polymer materials development, as well as new applications development in energy storage, sensors and devices, and environmental protection Provides a multidisciplinary approach to the development of responsive polymers, approaching the subject by the different types of polymer (e.g. temperature-responsive) and its range of applications
Download or read book Smart Drug Delivery System written by Ali Demir Sezer and published by BoD – Books on Demand. This book was released on 2016-02-10 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contribution book collects reviews and original articles from eminent experts working in the interdisciplinary arena of novel drug delivery systems and their uses. From their direct and recent experience, the readers can achieve a wide vision on the new and ongoing potentialities of different smart drug delivery systems. Since the advent of analytical techniques and capabilities to measure particle sizes in nanometer ranges, there has been tremendous interest in the use of nanoparticles for more efficient methods of drug delivery. On the other hand, this reference discusses advances in the design, optimization, and adaptation of gene delivery systems for the treatment of cancer, cardiovascular, diabetic, genetic, and infectious diseases, and considers assessment and review procedures involved in the development of gene-based pharmaceuticals.
Download or read book Smart Hydrogels in Tissue Engineering and Regenerative Medicine written by Xing Wang and published by Frontiers Media SA. This book was released on 2020-06-16 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functional Biopolymers written by Vijay Kumar Thakur and published by Springer. This book was released on 2017-10-25 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the synthesis, processing and application of selected functional biopolymers as new advanced materials. It reviews theoretical advances as well as experimental results, opening new avenues for researchers in the field of polymers and sustainable materials. The book covers various aspects, including the structural analysis of functional biopolymers based materials; functional biopolymer blends; films, fibers, foams, composites and different advanced applications. A special emphasis is on cellulose-based functional polymers, but other types of functional biopolymers (e.g. from chitosan, starch, or plant oils) are also described.
Download or read book Proceedings of the Second International Conference on Computing Communication Security and Intelligent Systems written by Shahid Mumtaz and published by Springer Nature. This book was released on with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogels written by Lacramioara Popa and published by BoD – Books on Demand. This book was released on 2019-04-10 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogels, as three-dimensional polymer networks, are able to retain a large amount of water in their swollen state. The biomedical application of hydrogels was initially hampered by the toxicity of cross-linking agents and the limitations of hydrogel formation under physiological conditions. However, emerging knowledge in polymer chemistry and an increased understanding of biological processes have resulted in the design of versatile materials and minimally invasive therapies.The novel but challenging properties of hydrogels are attracting the attention of researchers in the biological, medical, and pharmaceutical fields. In the last few years, new methods have been developed for the preparation of hydrophilic polymers and hydrogels, which may be used in future biomedical and drug delivery applications. Such efforts include the synthesis of self-organized nanostructures based on triblock copolymers with applications in controlled drug delivery. These hydrogels could be used as carriers for drug delivery when combined with the techniques of drug imprinting and subsequent release. Engineered protein hydrogels have many potential advantages. They are excellent biomaterials and biodegradables. Furthermore, they could encapsulate drugs and be used in injectable forms to replace surgery, to repair damaged cartilage, in regenerative medicine, or in tissue engineering. Also, they have potential applications in gene therapy, although this field is relatively new.
Download or read book Modeling Characterization and Processing of Smart Materials written by Kumar, Ajay and published by IGI Global. This book was released on 2023-08-07 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development, processing, and applications of smart materials presents many challenges, including performance correlations to the nature of their reinforcement and the sustainability of such materials through their recyclability, durability, and reparability. Experts have identified the challenge of achieving sustainable development and in this book highlight how smart materials can provide a solution to the problem. It emphasizes the multidisciplinary nature of smart materials and their potential for enhancing product functionalities and capabilities in different sectors, including the biomedical, pharmaceutical, aerospace, construction, automotive, and food industries. Modeling, Characterization, and Processing of Smart Materials proposes a comprehensive guide to addressing the challenges associated with smart materials, including the need for optimization and sustainability, and provides various nature-inspired algorithms, computational and simulation approaches, and artificial intelligence-based strategies for developing innovative smart materials. It also presents potential solutions for the limitations of smart materials and emphasizes the role of Industry 4.0 in maintaining their sustainability. Overall, this book offers a valuable problem-solution perspective on the development and applications of smart materials, making it an essential reference guide for academic researchers and industrial engineers in the fields of material science, chemical engineering, and environmental engineering.
Download or read book Tunable Hydrogels written by Antonina Lavrentieva and published by Springer Nature. This book was released on 2021-05-31 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current knowledge on tunable hydrogels, including the range of different materials and applications, as well as the existing challenges and limitations in the field. It covers various aspects of the material design, particularly highlighting biological responsiveness, degradability and responsiveness to external stimuli. In this book, readers will discover original research data and state-of-the-art reviews in the area of hydrogel technology, with a specific focus on biotechnology and medicine. Written by leading experts, the contributions outline strategies for designing tunable hydrogels and offer a detailed evaluation of the physical and synthetic methods currently employed to achieve specific hydrogel properties and responsiveness. This highly informative book provides important theoretical and practical insights for scholars and researchers working with hydrogels for biomedical and biotechnological applications.
Download or read book Carrier mediated Gene and Drug Delivery for Dermal Wound Healing written by Ehsan Nazarzadeh Zare and published by Royal Society of Chemistry. This book was released on 2023-08-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
