Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical properties of rock.

Download or read book A Short Course in Soil and Rock Slope Engineering written by Noel Simons and published by Thomas Telford Limited. This book was released on 2001-09-28 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprehensively treats soil & rock slope engineering in one volume. It focuses on getting the fundamentals right, explaining simple methods of stability analysis, and applying them to a wide range of practical applications.

Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.

Download or read book Slope Engineering written by Ali Ismet Kanlı and published by BoD – Books on Demand. This book was released on 2021-03-17 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of slope engineering encompasses slope stability analysis and design, movement monitoring, and slope safety management and maintenance. Engineers in this field are concerned with landslides and other gravity-stimulated mass movements. Their job is to frequently evaluate existing and proposed slopes to assess their stability. As such, this book provides information on remote sensing in landslide detection, tunnel face stability, stability analysis and maintenance of cut slopes, design techniques in rock and soil engineering, statistical models for landslide risk mapping, slope stability analysis in open-pit mines, ecological engineering for slope stabilization, and asphalt-stabilized strengthening in open-pit coal mining.

Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.

Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical

Download or read book Guidelines for Probabilistic Performance Based Seismic Design and Assessment of Slope Engineering written by Yu Huang and published by Springer Nature. This book was released on 2023-03-16 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a new design and evaluation framework based on slope Stochastic Dynamics theory to probabilistic seismic performance for slope engineering. For the seismic dynamic stability safety of slope, it shifts from deterministic seismic dynamic analysis to quantitative analysis based on nonlinear stochastic dynamics, that is, from qualitative to the description of stochasticity of earthquake excitation that meet the needs in related design specification and establish a performance standard. In the nonlinear dynamic time history analysis of slope subjected to seismic ground motion, the term “randomness” is used to express the uncertainty in the intensity and frequency of earthquake excitation for slope engineering dynamic seismic performance. It mainly includes seismic design fortification standard, corresponding ground motion excitation, performance index threshold, and slope deterministic nonlinear seismic dynamic response. Even more than that, the seismic dynamic large deformation approaches of the whole process and comprehensive analysis for flow analysis after slope instability failure. Eventually, the probabilistic seismic dynamic performance of the slope engineering will be characterized by nonlinear dynamic reliability.

Download or read book Rock Slope Engineering Fourth Edition written by Duncan C. Wyllie and published by CRC Press. This book was released on 2004-06-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability of rock slopes is an important issue in both civil and mining engineering. On civil projects, rock cuts must be safe from rock falls and large-scale slope instability during both construction and operation. In open pit mining, where slope heights can be many hundreds of meters, the economics of the operation are closely related to the steepest stable slope angle that can be mined. This extensively updated version of the classic text, Rock Slope Engineering by Hoek and Bray, deals comprehensively with the investigation, design and operation of rock slopes. Investigation methods include the collection and interpretation of geological and groundwater data, and determination of rock strength properties, including the Hoek Brown rock mass strength criterion. Slope design methods include the theoretical basis for the design of plane, wedge, circular and toppling failures, and design charts are provided to enable rapid checks of stability to be carried out. New material contained in this book includes the latest developments in earthquake engineering related to slope stability, probabilistic analysis, numerical analysis, blasting, slope movement monitoring and stabilization methods. The types of stabilization include rock anchors, shotcrete, drainage and scaling, as well as rock fall protecting methods involving barriers, ditches, nets and sheds. Rock Slopes: Civil and Mining Engineering contains both worked examples illustrating data interpretation and design methods, and chapters on civil and mining case studies. The case studies demonstrate the application of design methods to the construction of stable slopes in a wide variety of geological conditions. The book provides over 300 carefully selected references for those who wish to study the subject in greater detail. It also includes an introduction by Dr. Evert Hoek.

Download or read book Slope Engineering for Mountain Roads written by Gareth J. Hearn and published by Geological Society of London. This book was released on 2011 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a complete guide to the study, design, construction and management of landslide and slope engineering measures for mountain roads, with emphasis on low-cost. The geographical focus is on the tropics and sub-tropics, but is also highly relevant to other regions where heavy rain, steep slopes and weak soils and rocks combine to create slope instability. The causes and mechanisms of landslides are described, and the hazards they pose to mountain roads are illustrated. Methods of desk study, field mapping and ground investigation are reviewed and illustrated, with emphasis on geomorphological and engineering geological techniques. The design and construction of alignments, earthworks, drainage, retaining structures, the stabilization of soil slopes and rock slopes, and the control of erosion on slopes and in streams covered. Slope management as part of road maintenance and operation is reviewed, and procedures for risk assessment and works prioritization are described.

Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Download or read book Geotechnical Slope Analysis written by Robin Chowdhury and published by CRC Press. This book was released on 2009-11-18 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Freshly updated and extended version of Slope Analysis (Chowdhury, Elsevier, 1978). This reference book gives a complete overview of the developments in slope engineering in the last 30 years. Its multi-disciplinary, critical approach and the chapters devoted to seismic effects and probabilistic approaches and reliability analyses, reflect the distinctive style of the original. Subjects discussed are: the understanding of slope performance, mechanisms of instability, requirements for modeling and analysis, and new techniques for observation and modeling. Special attention is paid to the relation with the increasing frequency and consequences of natural and man-made hazards. Strategies and methods for assessing landslide susceptibility, hazard and risk are also explored. Moreover, the relevance of geotechnical analysis of slopes in the context of climate change scenarios is discussed. All theory is supported by numerous examples. ''...A wonderful book on Slope Stability....recommended as a refernence book to those who are associated with the geotechnical engineering profession (undergraduates, post graduates and consulting engineers)...'' Prof. Devendra Narain Singh, Indian Inst. of Technology, Mumbai, India ''I have yet to see a book that excels the range and depth of Geotechnical Slope Analysis... I have failed to find a topic which is not covered and that makes the book almost a single window outlet for the whole range of readership from students to experts and from theoreticians to practicing engineers...'' Prof. R.K. Bhandari, New Delhi, India

Download or read book Clay and Shale Slope Instability written by William C. Haneberg and published by Geological Society of America. This book was released on 1995 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten papers address both empirical and analytical aspects of clay and shale slope instability. Among the topics discussed in detail are: limit equilibrium stability analysis, shear strength of clay and clayey colluvium, use of triaxial test data to evaluate viscoplastic slope movements, numerical modeling of pore pressure distribution in heterogeneous soils, rational analysis of rainfall and landslide movement patterns, the effects of hydrothermal alteration on slope stability, mudrock durability and stability considerations, and regional clay and shale slope stability problems in Italy.

Download or read book Guidelines for Open Pit Slope Design written by John Read and published by CSIRO PUBLISHING. This book was released on 2009-11-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Open Pit Slope Design is a comprehensive account of the open pit slope design process. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on rock slope stability in open pit mines, this book provides an up-to-date compendium of knowledge of the slope design processes that should be followed and the tools that are available to aid slope design practitioners. This book links innovative mining geomechanics research into the strength of closely jointed rock masses with the most recent advances in numerical modelling, creating more effective ways for predicting rock slope stability and reliability in open pit mines. It sets out the key elements of slope design, the required levels of effort and the acceptance criteria that are needed to satisfy best practice with respect to pit slope investigation, design, implementation and performance monitoring. Guidelines for Open Pit Slope Design comprises 14 chapters that directly follow the life of mine sequence from project commencement through to closure. It includes: information on gathering all of the field data that is required to create a 3D model of the geotechnical conditions at a mine site; how data is collated and used to design the walls of the open pit; how the design is implemented; up-to-date procedures for wall control and performance assessment, including limits blasting, scaling, slope support and slope monitoring; and how formal risk management procedures can be applied to each stage of the process. This book will assist in meeting stakeholder requirements for pit slopes that are stable, in regards to safety, ore recovery and financial return, for the required life of the mine.

Download or read book Rock Fall Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2014-09-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock falls can be a public safety issue. This book provides comprehensive information on identification of these hazards, and design and construction of protection methods.Rock Fall Engineering describes first, the theoretical background to rock fall behavior in terms of the impact and trajectory phases of rock falls, and second, how this informati

Download or read book Slope Stability and Stabilization Methods written by Lee W. Abramson and published by John Wiley & Sons. This book was released on 2001-11-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major revision of the comprehensive text/reference Written by world-leading geotechnical engineers who share almost 100 years of combined experience, Slope Stability and Stabilization, Second Edition assembles the background information, theory, analytical methods, design and construction approaches, and practical examples necessary to carry out a complete slope stability project. Retaining the best features of the previous edition, this new book has been completely updated to address the latest trends and methodology in the field. Features include: All-new chapters on shallow failures and stability of landfill slopes New material on probabilistic stability analysis, cost analysis of stabilization alternatives, and state-of-the-art techniques in time-domain reflectometry to help engineers plan and model new designs Tested and FHA-approved procedures for the geotechnical stage of highway, tunnel, and bridge projects Sound guidance for geotechnical stage design and planning for virtually all types of construction projects Slope Stability and Stabilization, Second Edition is filled with current and comprehensive information, making it one of the best resources available on the subject-and an essential reference for today's and tomorrow's professionals in geology, geotechnical engineering, soil science, and landscape architecture.

Download or read book Rock Slope Stability Analysis written by Gian Paolo Giani and published by CRC Press. This book was released on 1992-01-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with the methods of assessing the stability of rock slopes and the techniques of improving the stability conditions of natural and artificial slopes which are at risk. It also describes survey and measurement methods to model the behaviour of rock masses.

Download or read book Plant Soil Slope Interaction written by Charles Wang Wai Ng and published by CRC Press. This book was released on 2019-07-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This inter-disciplinary book provides the latest advanced knowledge of plant effects on vegetated soil properties such as water retention capability, water permeability function, shear strength, slope hydrology, movements and failure mechanisms, and applies this knowledge to the solution of slope stability problems. It is the first book to cover in detail not only the mechanical effects of root reinforcement but more importantly the hydrological effects of plant transpiration on soil suction, soil shear strength, and water permeability. The book also offers a fundamental understanding of soil-plant-water interaction. Analytical equations are provided for predicting the combined hydrological and mechanical effects of plant roots on slope stability. A novel method is also given for simulating transpiration-induced suction in a geotechnical centrifuge. Application of this method to the study of the failure mechanisms of vegetated slopes reinforced by roots with different architectures is discussed. This book is essential reading for senior undergraduate and postgraduate students as well as researchers in civil engineering, geo-environmental engineering, plant ecology, agricultural science, hydrology and water resources. It also provides advanced knowledge for civil engineers seeking "green" engineering solutions to combat the negative impact of climate change on the long-term engineering sustainability of infrastructure slopes. Professionals other than civil engineers, such as ecologists, agriculturists, botanists, environmentalists, and hydrologists, would also find the book relevant and useful.